, ,

Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

Product Made in Japan
Manufacturer: Nitto Kohki
Model: ARA-100A

The versatile drilling machine with top-class power

Accepts various cutters for diverse drilling
Advanced electronic control for efficient drilling and operator safety

Portable Magnetic Base Drilling Machine ATRA ACE manual feed

Model ARA-100A
Max. 100 mm dia. x 75 mm deep

Nitto Kohki ARA-100A Portable Magnetic Base Drilling MachineSpecifications

ModelARA-100A
Power Source (Single Phase)220-240 VAC. 50/60 Hz
Electric DrillRated Power Consumption W1800
Rated Current                A8.2
No-load Speed          min ‘(rpm)110-210/330-660
Morse Taper No.MT3
Rated Duty                   min30
Magnet Power Consumption           W80
Hole Capacity mmCutterHole DiameterPlate Thickness
One-touch Type JETBROACH 35L17.5 to 4013 to 35
One-touch Type JETBROACH 50L17.5 to 5013 to 50
One-touch Type JETBROACH 75L17.5 to 5013 to 75
JETBROACH 75L50 to 10013 to 75
One-touch Type HI-BROACH 25L17.5 to 3513 to 25
One-touch Type HI-BROACH 50L18 to 3513 to 50
Twist DrillMax. 32 mm d a.
Magnet Holding Power               N(kgf)17000(1733)
Magnet Dimensons                mm110×220
Cutter PositionStraight Front to Back mm20
AdjustmentSwivel angle30′
Power Cord Length                    m5
Mass (Weight)                          kg30

Accessories Included

Pilot Pin 12075
Side Handle
2.5 mm Hex. Socket Screw Key
5 mm Hex. Socket Screw Key
6 mm Hex. Socket Screw Key
8 mm Hex. Socket Screw Key
7 x 8 mm Spanner
Safety Chain
Guard
Oil Tank
Oil Tank Bracket
3 pieces of Rod Handle

Optional Accessories

Ref. No.PNDescriptionSales Unit
1TB01507Cutting 0.12L1 piece
2TBO4374Supporting Magnet Assy
3TBO9727Holder MT03075 One-touch

Slow Starting Function

Slow speed at the beginning of boring will securely set a hole cutting position.Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

Two speed electric drill with speed adjustment

Optimum drill speed adjustment can be made to bore a hole on difficult-to-cut materials or to securely set a hole cutting position at the initial cutting stage.Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

Load Indication and LED Condition

Load Indication
The load indicator (LED) indicates the condition of the load with different colors of LED light.
The LED lights up in green. → The load on the drill motor is normal.
The LED lights up in red. → The load on the drill motor is close to overload.
The LED blinks in red. →The drill motor is overloaded.

Automatic Stop Function
As the drilling load increases, the load indicator will change in color from green to red. In addition, if excessive feeding force is applied, the load indicator will rapidly blink red and the rotation of the drill motor will slow down and stop. After the drill motor has come to a complete stop, the load indicator will slowly blink in green. To resume the rotation of the drill motor, release the load and turn off the switch of the drill motor, and then turn it on.

Automatic Restart Function
If the load is released while the load indicator is blinking red, the drill motor will resume its rotation.Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

Built-in Motion Sensor
If any lateral movement or excess vibration is detected during drilling a hole, the drill motor stops instantly and the LED blinks red. To resume operation, turn the magnet switch off and on.
Fail-safe Restart
The magnetic field will become active, but the drill will not re-start even if power is re-supplied after accidental shutdown. The LED will blink green at this stage. Drilling can only be continued after turning on the drill switch.
Magnet Open-circuit Sensor
The drill will not start until the magnetic field is active. If a malfunction occurs on the magnet, the LED will blink red slowly and the drill motor will not revolve.

Features

Reversible Feed Handles

Nitto Kohki ARA-100A Portable Magnetic Base Drilling MachineFeed handles can be positioned on the right or left hand side for ease of drilling.
When changing the feed handle position, the oil tank is required to be positioned opposite to the feed handles.

Drilling Position AdjustmentNitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

When the clamp lever is loosened, the drill position can be adjusted back and forth by 20 mm and pivoted 15 degrees to the left or right. The clamp lever can be positioned for left-hand or right-hand operation.

One-Touch Cutter Replacement (Holder MT03075 One-Touch)

Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine
Mounting the cutter

Align the depression in the cutter shank with the white line on the sleeve, and then insert the cutter.

Nitto Kohki ARA-100A Portable Magnetic Base Drilling MachineRemoving the cutter
Turn the sleeve counterclockwise. The cutter will come off.

Nitto Kohki ARA-100A Portable Magnetic Base Drilling Machine

Available in the market
Twist Drill Bit

Nitto Kohki ARA-100A Portable Magnetic Base Drilling MachineNitto Kohki ARA-100A Portable Magnetic Base Drilling MachineNitto Kohki ARA-100A Portable Magnetic Base Drilling Machine
MT3 Morse taper shank drill bit can be directly installed.Use Morse taper sleeve MT3 for other sizes than MT3.A drill chuck is required to install a straight drill bit.

 

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top