Japan, Obishi Keiki
Obishi Keiki Seisakusho Bevel Type Straight Edge
Made in Japan
Manufacturer : Obishi Keiki Seisakusho
Stock No : 214-1
- Suitable for Flatness, Bending, etc inspection and as a level for marking.
- Precision surface is 1 surface on the knife tip side (lower side of the label)
- There are hardened and non hardened types.
| Nominal Measurement | Measurement (L×H×Wmm) |
Hardened | Non Hardened | Blade Thickness (mm) |
Straightness (μm) |
Mass (kg) |
|---|---|---|---|---|---|---|
| Code No. | Code No. | |||||
| 150 | 150×25×3 | EK101 | EK201 | 1 | 13 | 0.1 |
| 200 | 200×25×3 | EK102 | EK202 | 1 | 14 | 0.1 |
| 300 | 300×35×4 | EK104 | EK204 | 2 | 16 | 0.4 |
| 450 | 450×40×5 | EK105 | EK205 | 2 | 19 | 0.7 |
| 600 | 600×40×5 | EK106 | EK206 | 2 | 22 | 0.9 |
| 1000 | 1000×47×5 | EK107 | EK207 | 2 | 30 | 2.5 |
| 1500 | 1500×72×7 | EK108 | EK208 | 3 | 40 | 5.5 |
| 2000 | 2000×85×8 | EK109 | EK209 | 3.5 | 50 | 11.0 |
| 2500 | 2500×90×10 | EK110 | EK210 | 4 | 60 | 18.0 |
| 3000 | 3000×95×10 | EK111 | EK211 | 4 | 70 | 21.5 |
Related Products
-
Nacol L-series Oil Tank Dustproof Accumulator
-
Chiyoda Seiki GMF-100 Small/Medium/Large flow/Pressure regulator/Governor For General Industrial Gas (primary pressure: 0.1 to 1.56 MPa/set pressure 0.02 to 0.3 MPa)
-
OSC92OT109 3 – Component Load Cell
-
Hammer Caster 420Y-N Trivalent Chrome Conversion Coated Caster
-
Vessel No.NMC-2PB BIT Magnetizer/Demagnetizer Blue (2-Piece Set)
-
Tokyo Ko-on Denpa CPA-9100 Series Manual Control Fader
REQUEST QUOTATION
PAYMENT
LINK
