Japan, Obishi Keiki
Obishi Keiki Seisakusho Cast Iron Precision Angle Plate
Made in Japan
Manufacturer: Obishi Keiki Seisakusho
Stock No: 301
- The base and upright surface accuracy is ensured.
- The base and upright surfaces are scrape-finished.
- On the base and upright surfaces, slotted holes are provided for the fixation of workpieces.
- It can be used as a machining jig if installed in machining centers.
- There is a support on the inner part for works longer than 200mm.
*We also manufacture similar products with special measurements.
Code No. | Nominal Measurement | Measurement (L×W×H×tmm) |
No of Slotted Holes (pcs) |
Parallelism (μm) |
Mass (kg) |
---|---|---|---|---|---|
RA101 | 100 | 100×75×75×16 | 2 | 7 | 1.2 |
RA102 | 125 | 125×100×100×16 | 3 | 8 | 2.0 |
RA103 | 150 | 150×125×125×18 | 9 | 3.5 | |
RA104 | 175 | 175×150×150×19 | 10 | 5.0 | |
RA105 | 200 | 200×175×175×20 | 8.5 | ||
RA106 | 250 | 250×200×200×22 | 14.5 | ||
RA107 | 300 | 300×250×250×25 | 17.0 | ||
RA108 | 350 | 350×300×300×25 | 4 | 38.0 | |
RA109 | 400 | 400×350×350×35 | 62.0 | ||
RA110 | 450 | 450×400×400×37 | 5 | 15 | 87.0 |
RA111 | 500 | 500×400×400×45 | 102.0 | ||
RA112 | 600 | 600×450×450×45 | 20 | 142.0 |
Related Products
-
Gentos UT-3CA Flashlight Clamp Accessory
-
Vessel No.ZB20-40 Zirconia Endless Belt (for GT-BS20)
-
Watanabe WJF-PA2 Power monitoring unit – Remote I/O
-
Niigata Seiki P-5C Pin Gauge Cabinet
-
YOSHITAKE GP-2000CS Pressure Reducing Valve – Steam
-
Okazaki Seiko BCER Top Solid Carbide End Cutting Reamers (Straight Shank)