Chamfering Machine, Japan, Ogura, Other Tools
Ogura HBB-32HPW Electro-Hydraulic Portable Rebar Benders
Product Made in Japan
Manufacturer: Ogura
Model: HBB-32HPW
Features of HBB-32HPW
- Fully compatible with high-strength reinforcing bars required by the new era construction method = SD490.
- A “repair” vendor that integrates the hydraulic pump and the workpiece.
- Correction work by “push/pull bending” on-site is possible.
- Because the tip turns freely, it is possible to respond flexibly on-site.
Specification
| Motor | Single-Phase, 110-115V/220-230V, 50/60Hz, 1330W
Double Insulation |
| Bending Speed | 90 degrees bend
D32:15.0 seconds D13:12.0 seconds |
| Max. Bending Capacity | 620N/mm² (63kgf/mm²) Max.D32 |
| Weight | 25.4kg |
| Dimensions | 670mm (L)×302mm (W)×219mm (H) |
| Standard Accessories | Wooden box
Hydraulic oil #46 Hex wrenches (3•4•5•6•8mm) Spanner(14×17mm & 24mm) Roller |
Related Products
-
Eagle Jack (Konno Corporation) ED-160-PG-75kM-160 Hydraulic Bottle Jack
-
Chiyoda Seiki MGS-200S Medium Flow Rate, Self-powered Pressure Regulator/Large Flow Rate, Pilot Type Pressure Regulator (primary pressure: 1.0 MPa or less/adjustment pressure 0.01 to 0.1 MPa, standard flow rate: 300 m3/h・Air)
-
Kikusui Tape 1922PC Double-Coated Glue Tape
-
Kondotec Flexible Taper Cone
-
Miyakawa Oxide film remover
-
Daiichi Keiki ZJO Series Female-to-Male Joint
REQUEST QUOTATION
PAYMENT
LINK
