Chamfering Machine, Japan, Ogura, Other Tools
Ogura HBB-525 Electro-Hydraulic Portable Rebar Benders
Product Made in Japan
Manufacturer: Ogura
Model: HBB-525
Features of HBB-525
- A “repair” vendor that integrates the hydraulic pump part and the work part.
- Correction work by “push/pull bending” on site is possible.
- The tip can be swung freely, and work in the field can be handled flexibly.
Specification
| Motor | Single phase 100V 1330W 50 / 60Hz double insulation |
| Mass | 15.2kg |
| Body dimensions | 486 (L) x 194 (W) x 226 (H) mm |
| Bending speed | 90 ° bending (D25) push bending About 8.0 seconds Pulling about 7.0 seconds |
| Bending ability | Reinforcing bar diameter 25D (SD345 equivalent: 490N / mm 2(50kgf / mm 2 )) |
| Minimum floor height when bending 90 ° | Push bending About 362mm Pulling about 113mm (Inner dimension from floor to rebar) |
| Standard accessories | Bending roller (1 set), Hexagon wrench (4 · 5 · 6), Spanner (17 × 19), Nut tightening rod, Ground adapter, Hydraulic oil, Product case (wooden box) |
| Option | Modify for bending hook C |
Related Products
-
UNIKA UR21-KV V-Series For Vibration
-
TSURUMI PUMP PARTS: HEAD COVER FOR 4PN 8PN Parts & Accessories
-
TONE HTX308HL Long Torx Socket Set (with Socket Holder)
-
UHT CORPORATION New GU-1 fill set Cylinder polishing unit
-
Nakatani Kikai NC3H Chipping Hammer (Straight Type・Chisel Holder Type)
-
Gentos REXEED Series RX-044D Flashlight (450 lumens)
