Okabe
Okabe B10-0550 Separator Joint
Product Made in Japan
Manufacturer: Okabe
Model: B10-0550
Joint hardware for separators
| Product | Quantity (pc/case) | Weight (kg/case) | Packing |
|---|---|---|---|
| Separator Joint W5/16 | 100 | 10 | Case |
| Separator Joint W3/8 | 100 | 11 | |
| Separator Joint W1/2 | 50 | 10 |
Size
Features
● Easy on-site adjustment with a wrench.
● No welding required!
◆ Allowable load
●For 5/16 12.0kN (1224kgf)
●For 3/8 18.0kN (1836kgf)
●For 1/2 24.0kN (2447kgf)
Usage instructions
① Insert two separators into the sleeve. (See Fig. A)
② Slide two separators to obtain the necessary length. (Secure at least 30mm for excess length.)
③ Tighten the wedge until its bottom end is inserted further inside than the sleeve bottom surface. See Fig. B [Torque: 3.43kN・cm (350kgf・cm) or more].
Cautions
● Be sure to tighten the wedge until its bottom end is inserted further inside than the sleeve bottom surface
(See Fig. B).
● Separator that cannot be inserted into the sleeve, such as a hat-type separator, can be used by cutting.
● Be sure to use the product within the allowable load or less.
