Product Made in Japan
Manufacturer: SENYO Co., LTD

Clamp tube that generates little burrs and requires almost no effort in post-processing.
“Senyo Aluminum W Clamp Tube” is a product with an oval outer diameter and a cocoon-shaped inner diameter.

• Insert two wire loafs in parallel into the clamp tube.
• The contact area between the wire rope and the tube becomes very large.
• The excess material is pushed outward and is completely tightened.
• Fewer burrs occur and post-processing requires almost no effort.
• No loss of clamp tube

W Clamp Pipe Lock Processing Method

• Fold back the end of the rope to make an eye and set the clamp tube under the neck of the eye.
• Leave the rope end extending beyond the end of the Klumph tube by the rope diameter.
• Perform crimping at specified pressure.
• Remove any protruding burrs with a burr cut, etc.