Japan, Shimizu
Shimizu M-7 type Sharpening Machine for Engraving
Made in Japan
Manufacturer: Shimizu Manufacturing Co., Ltd
Model: M-7
Features
- From resharpening carving knives to adding a super-finish edge.
- Easy back sharpening of carving knives of all shapes, such as marking knives, flat blades, round blades, triangular blades, scoop blades, etc.
- Convenient for back sharpening of ultra-small carving knives and blades with a large rake angle.
- From rough finishing to super finishing, sharpening of various blades can be performed several times faster than hand sharpening.
- Ultra-compact and lightweight, so you can carry it anywhere.
- The ON state can be seen at a glance by adopting a neon switch.
- Can be used with a 100V household power line.
- *Parts can be easily replaced by simply removing the nut.
| part number | model | JAN code |
| 13022 | M-7 type | 602055 |
* Only the lower 6 digits of the JAN code are displayed (the upper 7 digits are 4960092)
specification | |
motor | 30W |
Voltage | 100V |
frequency | 50Hz/60Hz |
current | 0.8/0.7A |
power consumption | 78/82W |
number of revolutions | 1400/1700rpm |
Rated time | continue |
Width | 350mm |
Depth | 150mm |
height | 150mm |
weight | 5.5kg |
accessories | ||
PVA grindstone | 60×10×12mm | 1 sheet |
cloth buff | 60×15×12mm | 1 sheet |
felt buff | 60×4×12mm | 1 sheet |
Felt hard buff (mountain type) | 60×6×12mm | 1 sheet |
Skin buff (medium) | 60×3×12mm | 1 sheet |
Skin buff (small) | 25×3×5mm | 1 sheet |
gold plate | 60×3×12mm | 1 sheet |
Emery stick (blue stick) | One | |
spanner | 14 mm | 1 |
spanner | 19mm | 1 |
hex wrench | 5mm | One |
diamond brick | 1 piece | |
Related Products
-
Isolite Insulating JIS B series Insulating Firebrick
-
SAKUSAKU CNMG120408-MR Turning Insert (80° Rhombic Negative)
-
TERAOKA SEISAKUSHO 7602 #25 Double-coated Adhesive Kapton(R) Film Tape
-
Seiwa WLGPA09041-CA Stanchion type Lighting Equipment And Control Equipment
-
NAGANO KEIKI GV4_ Glycerine Bath Type Pressure Gauges
-
TSUBOSAN Square Engineer’s Files
