,

SHOWA SOKKI 7135A Portable Balancer/Field Balancer

Made in Japan
Manufacturer: SHOWA SOKKI
Model: 7135A

Features

  • Condensing functions and usability into a compact body enables efficient field balancing, from on-site measurement to work report output.
  • Easy balancing while installed
    The portable balancer, Model-7135A, enables you to conveniently adjust the balance of installed rotating machinery.
    We enhance on-site efficiency with mobility, especially for non-rotating body balance tests or assembly balancing.
    Additionally, it facilitates measurement work with automatic tuning using a tracking filter.
  • Outstanding ease of use with dedicated software
    The dedicated software “Balance One” enables extremely efficient work when using it in conjunction with a laptop computer.
    You can balance it using key input while viewing the notebook screen, and the data is report-ready with Excel compatibility.
    After that, just go back to the office and print it out and you’re done.
    We provide exceptional usability that central processing can handle from start to finish.
  • The Model-7135A, which is equipped with convenient functions that enhance versatility,
    It can serve as a field balancer for rotating machines ranging from 180 to 30,000 rpm.
    Furthermore, it offers versatility as an acceleration, velocity, and displacement sensor with vector output for polar diagrams and functions as a vibration meter, monitor, and tachometer.

Application example


This software dedicates itself to the 7135, facilitating delicate balance correction work and providing a report format.

Composition

Body Model-7135AOne
Electrodynamic detector Model-2007 (You can change it to other detectors as an option.)One
Detector cable (5m) CA2422-5One
Detector mounting magnet MG-2One
Photo sensor (with 2m cable) GSR-05ROne
Photo sensor extension cable (5m) CA3512-5One
Magnet Stand MB-BOne
Storage case ALM-1One
Photo sensor reflective tape REF-100One

Composition

Low-pass correction circuit/7135-04-XX HzBalance Correction Calculator/CAL-40
Balance Correction Program for PC/Balance OnePhoto sensor extension cable (30m)/CA3512-30
Extension cable for electrodynamic detector (30m)/CA2521-30Output cable (1.5m) both ends BNC/BB-150
Detector mounting magnet (for 728T)/MG-1Detector mounting magnet (for 2014, 2015)/MG-5
Electrodynamic detector/2014, 2015Accelerometer/728T
Non-contact displacement detector/SSC-7510
(Note) Electrodynamic detectors cannot mix standard type and low-frequency correction type.

Specification

Standard detectorModel-2007 / 15-500Hz
Option typeModel-2008 (requires low-frequency correction circuit) / 10-500Hz
Model-2014/2015 (vertical/horizontal) / 5-500Hz
Model-2014/2015 (requires low-frequency correction circuit) / 3-500Hz
Model- 728T (acceleration sensor) / 3 ~ 500Hz
Model-SSC-7510 (non-contact sensor) / 3 ~ 500Hz
Number of input channelsUp to 6 channels, the number of channels for each detector can be changed within 6 channels
, and one channel can be selected and displayed using the channel selector.
Rotation pulse inputPhotosensor or 0 to +12V pulse signal, pulse width 10μS or more
+12V built-in power supply for photosensor drive
Vibration amount display range0.01 to 1000 μm (PP) Resolution 0.01 μmp-p (high sensitivity range)
Measuring range3.16, 10, 31.6, 100, 316, 1000 μm (PP)/FS
Tachometer display180~30,000rpm Resolution 1rpm
OVER, LOW lampIndicator lamps for proper range indication
output[Waveform monitor output] ±5V/FS
[Vector output] ±5VDC for both X and Y
[Amplitude DC output] 0 to +5VDC
[Rotation speed DC output] 0 to +5VDC
RS-232CD-SUB 25-pin connector enables data reading and range/filter control on a PC
power supplyAC100V±10V 1A or less
External dimensions/mass260 (W) x 100 (H) x 180 (D) mm (excluding protrusions) Approx. 2.3 kg

 

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top