Japan, TERAOKA SEISAKUSHO
TERAOKA SEISAKUSHO 647 0.1 Circuit Tape

Product Made in Japan
Manufacturer: TERAOKA SEISAKUSHO
Model: 647 0.1
No. 647 uses a polyester film that is coated with a highly heat and chemical-resistant silicone adhesive.
There are 4 tape thicknesses available depending on adhesive thickness: 0.05, 0.08, 0.1 and 0.12mm. This tape can be used on various uneven surfaces and is optimal for plate masking in printed board terminal components.
Structure of 647 0.1
Features
- Heat resistance, Chemical resistance, Solvent resistance
- Less adhesive residue
- Good fit to the printed circuit board
- 4 kinds of overall thickness
Uses
- For plating masking of terminals of printed circuit board
- Heat resistant masking
- Fixing parts required removability
- For fixing silicone rubber
- Fixing silicone-type release liner
Overall thickness (㎜) | 0.100 |
---|---|
Standard color | Green,Red |
Standard length (m) | Green:30、60 Red:60 |
Peel adhesion (N (gf) /W25㎜) | 7.30(744) |
Tensile strength (N/25㎜) | 94.1 |
Elongation (%) | 80 |
Standards met | ─ |
The above data are typical examples measured using JIS or our corporate testing method.
RoHs2 directive 10substances are not contained.
Related Products
-
Kitz 20ST/20STL (Gas service) Ductile Iron 20K Ball Valve Reduced Bore
-
KONAN MVD2 2-Position, 5-Port Solenoid Valves
-
TONE 8AD-L200 Anchor Bolt Socket
-
ENDO KOGYO ARS070 Air Balancer (With Lift Control Module)
-
TERAOKA SEISAKUSHO 636F #50 PEN Film Adhesive Tape
-
TAIYO F-A2M25(30) Series Shock Absorber (High-speed F Type)