Japan, Toho Seisakusho
Toho Seisakusho dMC-50, 35, 24 Explosion-Proof Control Motor
Product Made in Japan
Manufacturer: Toho Seisakusho
Model: dMC-50, 35, 24
- A control motor that is compact and low-priced while maintaining the same lifespan and performance as conventional products. Special timing, painting, potentiometers, etc. can be customized by special order.
- Ideal for use as damper and valve operating devices in explosion-proof areas. Fully compliant with EU RoHS Directive (10 substances)
Specification
Format | dMC-50 | dMC-35 | dMC-24 | ||
---|---|---|---|---|---|
Output torque (N・m) | 50 | 35 | 24 | ||
Main shaft diameter (mm) | φ15 | φ14 | φ14 | ||
Timing (90° stroke)
50/60Hz |
60/50s | ○ (8W motor used) | ○ (Using 4W motor) | ○ (Using 4W motor) | |
30/25s | – | ○ (8W motor used) | ○ (Using 4W motor) | ||
Motor specifications
|
Power supply voltage (V) |
8W: AC100 or 110 or 200 or 220 | 4W: AC24 or 100 or 110 or 200 or 220 | ||
Power consumption (VA) |
8W: 40 | 4W: 24 | |||
Heat resistance class | E class | ||||
Time rating | 50% (reference short time rating: 30 minutes) | ||||
Wire port | G1/2 1 or 2 locations Cable gland type (usable cable diameter φ6 to φ12) | ||||
Ambient temperature (°C) | -20 ~ +50 | ||||
Protective structure | Protection class against intrusion of solid objects and water: Equivalent to IP55 Ignition degree, explosion class and equipment protection level of target gas or steam: IIBT4Gb |
||||
Painting | Standard paint color: Munsell N5.0 System: Lacquer | ||||
Mass | Approximately 6kg | ||||
Option
|
Signal contract | Maximum 2 pieces AC250V10A DC250V0.3A DC125V0.6A (resistive load) | |||
Potentiometer | Wire-wound resistance type: 135Ω (standard), 200Ω, 500Ω, 1kΩ, 2kΩ Conductive plastic type: 135Ω, 1kΩ, 2kΩ |
||||
Others | Lever, explosion-proof cable gland | ||||
Durability (according to internal regulations) | 50,000 round trips (timing 60s specification) |
100,000 round trips (timing 30s specification) |