Japan, Toho Seisakusho
Toho Seisakusho MC Series General-Purpose Control Motor
Product Made in Japan
Manufacturer: Toho Seisakusho
Model: MC Series
- MC-1 type control motor output torque 24N・m
- MC-3 type control motor output torque 35N・m
- MC-6 type control motor output torque 60N・m
Feature
-
- Two-position control or floating control (B) and proportional operation (C, CX, CE, E) are standardized.
- 135Ω signal (electrical type) can be directly input to proportional action type ・Built-in balancing relay (CX)
- Proportional action type ・Built-in electronic positioner (CE) allows direct input of DC4 to 20mA, DC1 to 5V or DC0 to 10V signals (electronic/DDC)
- Option: Forced opening/closing type proportional control control motor
*All models use extreme pressure lubricating grease, so there is no need for regular lubrication.
* Explosion-proof type is also available.
*We can accommodate custom specifications other than those listed above, so please contact us.
Specification
Format | MC-1 type control motor MC-3 type control motor MC-6 type control motor |
|||
---|---|---|---|---|
Output torque
|
MC-1 | 24 N・m | ||
MC-3 | 35 N・m | |||
MC-6 | 60 N・m | |||
Rated voltage
|
MC-1 | 1φ, AC24V, AC100V/110V, AC200/220V±10% (50/60HZ) | ||
MC-3 |
1φ, AC100V/110V, AC200/220V±10% (50/60HZ)
|
|||
MC-6 | ||||
Output shaft rotation angle | 90° | |||
Operating time | 30/25s or 60/50s (50/60Hz) | |||
Control operation | B: 2-position/3-position operation C, CX, CE, E: Proportional operation |
|||
Power consumption
|
Format | B,C,E | CX/CE | |
MC-1 | max.24VA | max.27/34VA | ||
MC-3
|
30/25s | max.40VA | max.43/50VA | |
60/50s | max.24VA | max.27/34VA | ||
MC-6 | max.40VA | max.43/50VA | ||
Motor type
|
Single phase capacitor motor with brake | |||
MC-1 | Class E insulation continuous rating | |||
MC-3
|
30/25s | Class E insulation 30 minutes rating | ||
60/50s | Class E insulation continuous rating | |||
MC-6 | Class E insulation 30 minutes rating | |||
Signal contact | B type only, SPST x 2 (ON when fully open, ON when fully closed) Contact capacity AC125/250V 10A (non-inductive load) |
|||
Input signal | CX: 135Ω potentiometer 3-wire connection CE: DC4~20mA, DC1~5V or DC0~10V |
|||
Protective structure | IP55 | |||
Material | Case: aluminum alloy | |||
Permissible ambient temperature | B, C, E type: -20 to +60℃ CX, CE type: -10 to +50℃ |
|||
Paint color | Munsell N5 | |||
Mass/Drawing | Please refer to the catalog PDF for details. |