Japan, Toho Seisakusho
Toho Seisakusho MCH Series Control Motor With Manual Handle
Product Made in Japan
Manufacturer: Toho Seisakusho
Model: MCH Series
MCH-6 type control motor output torque 60N・m
MCH-10 type control motor output torque 100N・m
MCH-20 type control motor output torque 200N・m
MCH-40 type control motor output torque 400N・m
・Equipped with a manual handle:
Manual operation is possible without a clutch, and the special structure that prevents the handle from rotating during electric operation makes it easy to handle.
・Two-position control or floating control (B), proportional operation (C, CX, CE, E) are available. Standardized
/ Proportional type / Built-in balancing relay (CX) can directly input 135Ω signal (electrical type)
/ Proportional type / Built-in electronic positioner (CE) can accept 4 to 20 mA DC, 1 to 5 V DC or 0 to 10 V DC Signals (electronic/DDC) can be input directly
・Option: Compatible with forced opening/closing operation Proportional control control motor
*All models use extreme pressure lubricating grease, so there is no need for regular lubrication.
* Explosion-proof type is also available.
*We can accommodate custom specifications other than those listed above, so please contact us.
Specification
| Format | MCH-6 type control motor MCH-10 type control motor MCH-20 type control motor MCH-40 type control motor | |||
|---|---|---|---|---|
Output torque | MCH-6 | 60 N・m | ||
| MCH-10 | 100 N・m | |||
| MCH-20 | 200 N・m | |||
| MCH-40 | 400 N・m | |||
| Rated voltage | 1φ, AC100V/110V, AC200/220V±10% (50/60HZ) | |||
| Output shaft rotation angle | 90° | |||
| Operating time (90°) | 30/25s or 60/50s (50/60Hz) | |||
| Control operation | B: 2-position/3-position operation C, CX, CE, E: Proportional operation | |||
Power consumption | Format | B,C,E | CX/CE | |
| MCH-6 | max.40VA | max.43/50VA | ||
| MCH-10 | max.70VA | max.73/80VA | ||
| MCH-20 | max.100VA | max.103/110VA | ||
| MCH-40 | max.230VA | max.233/240VA | ||
| Motor type | Single-phase capacitor motor with brake, Class E insulation, 30 minutes rating | |||
| Signal contact | B type only, SPST x 2 (ON when fully open, ON when fully closed) Contact capacity AC125/250V 10A (non-inductive load) | |||
| Input signal | CX: 135Ω potentiometer 3-wire connection CE: DC4~20mA, DC1~5V or DC0~10V | |||
| Protective structure | IP55 | |||
| Material | Case: aluminum alloy | |||
| Permissible ambient temperature | B, C, E type: -20 to +60℃ CX, CE type: -10 to +50℃ | |||
| Paint color | Munsell N5 | |||
Mass/Drawing | MCH-6 | Please refer to the catalog PDF for details | ||
| MCH-10 | Please refer to the catalog PDF for details | |||
| MCH-20 | ||||
| MCH-40 | ||||
