,

Tosoku RE25 Series Optical Rotary Encoder

Product Made in Japan
Manufacturer: Tosoku
Model: RE25 Series

RE25 is a VA designed eco-friendly – power-saving and low-cost with lesser parts – rotary encoder. Its size, mounting procedures, and inner structures have been designed for a wide array of uses; measurement devices, medical equipment, industrial machinery, telecommunication devices, and machine tools.

Features

● Eco-friendly:
1) Power-saving
2) Low cost and lesser parts by VA design
3) RoHS compliant
● Thin-line (18.8×25.5×8.9mm) and lightweight (18g)
● Various types of models with options: lead wire with or without connector, clamp for horizontal/vertical mounting
● Long-lasting without “contact chatter” due to its optical switching function
● Waterproofed model available

Specifications

1. Electrical and Mechanical specifications
ItemsRated Value
Number of pulses16PPR, 25PPR
Supply voltage3.3V±10%5V±10%
20mA10mA
Output signalsChannel A/B: Square Wave CMOS chip
Output voltageHighSupply Voltage(3.3V): - 0.3V ≦ , (5V): - 0.5V ≦
Low≦ 0.4V
Response frequency200Hz
Rotational TorqueLight: S4±1mN・m
Standard: C6±2mN・m
Medium: M10.5±3.5mN・m
High: H16±5mN・m
Weight18g
2. Reliability and Environmental specifications
ItemsRated Value
Durability of operating areaThrust directionPush100N
Pull50N
Radial1N・m
Rotational durabilityLight: S1 million strokes (No load)
Standard: C
Medium: M
High: H100 thousand strokes (No load)
Screw TorqueNot more than 1N・m
Heat resistance of solderSolder bit temp.: MAX 350℃Within 3 seconds for each terminal
Operating temperature0℃  ~ +55℃
32F ~ 131F
Storage temperature- 40℃ ~ +85℃
- 40F ~ 185F

Output Waveform

1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0);
2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1);
3) Detent positions are where both signals A and B are low (0).

Part Number Designation

Dimensions (mm)

Circuitry

Warranty

● 1 year from the date of shipment.

Precautions

WiringUse buffering amplifier when extending lead wire over 30cm.
SolderingDo not put a load on the terminal area during and immediately after soldering.
OperationDo not use flow/reflow soldering machines.
PowerUse under specified power voltage and connect properly.
WaterproofingDo not fasten tighter with the torque of more than 1.5N・m.

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top