Japan, TSUBOSAN
TSUBOSAN Hand S-Cut Engineer’s Files
Product Made in Japan
Manufacturer: TSUBOSAN FILE CO., Ltd
Model: Hand S-Cut :HI20011, HI20012, HI20013, HI25011, HI25012, HI25013
Features
- This is a single-tooth file with the cutting edge cut in only one direction.
- It has a clean finished surface and is suitable for use on materials that are prone to clogging.
- Used for flattening the work surface or cutting corners.
- This is a file used when finishing by hand after machining.
- The size of ironwork files is generally referred to by the blade length, not the total length.
Use
- It is used for flattening the work surface and removing corners.
- A file used when finishing by hand after machining.
- The size of an iron file is generally referred to by the blade length, not by the total length.
Product
| HI20011 | ENGINEER’S FILES HAND 200mm | S-cut BASTARD | 21.0 | 5.0 | ME900M |
|---|---|---|---|---|---|
| HI20012 | ENGINEER’S FILES HAND 200mm | S-cut SECOND | 21.0 | 5.0 | ME900M |
| HI20013 | ENGINEER’S FILES HAND 200mm | S-cut SMOOTH | 21.0 | 5.0 | ME900M |
| HI25011 | ENGINEER’S FILES HAND 250mm | S-cut BASTARD | 25.0 | 6.0 | ME900M |
| HI25012 | ENGINEER’S FILES HAND 250mm | S-cut SECOND | 25.0 | 6.0 | ME900M |
| HI25013 | ENGINEER’S FILES HAND 250mm | S-cut SMOOTH | 25.0 | 6.0 | ME900M |
HI20011
HI20012
HI20013
HI25011
HI25012
HI25013
Handle ME900M
Features
A commonly used wooden handle.
Available in 6 sizes: SS, SH,S, M, L,and LL.
Please check the standard table below for the most suitable file.
SPECIFICATION
