Japan, UHT CORPORATION
UHT Corporation The Collets And Collet Nut For The Spindle No. 5 φ2.0

Made in Japan
Manufacturer: UHT CORPORATION
Model: The Collets And Collet Nut For The Spindle No. 5 φ2.0
The collets and collet nut for Spindle No. 5.
The 6.0-mm collet is included in Spindle No. 5 or Kit No. 5 by default.
The collet’s nominal diameters are the maximum dimensions to be held.
Note that when the difference between the shank diameter and the collet’s nominal diameter increases, the runout will also increase.
For example, the 6.0-mm collet can hold the 5.5-mm shank, but not the 6.3-mm shank.
The accuracy will become low with the 5.1-mm shank.
Use the 5.0-mm collet for the shank diameters of 5.0 mm or less.
Note that these collets require a long lead time.
Main Specifications
Product name | The collets and collet nut for the Spindle No. 5 φ2.0 |
---|---|
Part number | 5009009 |
Related Products
-
Watanabe A6000 Series A6□□B Digital panel meter for process signals
-
Hammer Caster 960BPS Trivalent Chromate Conversion Coated Caster
-
DAIA DSP-120 Motor Drive Hydraulic Pump
-
Japan Clamp HRX Horizontal Lifting Clamp (Single Hole)
-
SK Sato SK-270WP-K, S270WP-01 Waterproof Digital Thermometer Without Hole For Wall Mount
-
KANSAI Yoritori (Fishing Hardware)