UNIKA Meta-core Triple TR T.C.T Hole Saw

Manufacturer: UNIKA
Model: T.C.T. hole saw Meta-core TR (MCTR Type)/ Center drill (HSS)/ Ejector Spring/ Meta-core TR (Tool Box Set)

■3-ply cutters reducing tip crack even with hard use. Realizes light and speedy drilling and long lifetime.
■The 25mm effective depth enables drilling ranging from thick steel plate to curved face drilling in thick metal pipes.
■Adopts the step center drill that dampens impacts that occur when the center drill passes through.
◆Effective length: 25mm(Full depth: 25 mm)
◆Matching Drill: Electric drill/drilling machine/Percussion drill(rotating mode)
◇Ejector spring fitted as standard/compatible with pipes and stainless steel

■Product promotion video

Dimensional Drawing

USES

Sheet metal (HB200 or less)• Stainless steel (10mm ore less)• Pipe• Aluminum (5mm ore less)• FRP• PVC• Plastic

■3-Ply Cutters

Cutting the shavings to one-third with respect to the cutting width using 3-ply cutters (outer, inner and intermediate cutting blades) has dramatically decreased cracks on the tip corner. This also includes inside cutting edges so debris can be discharged smoothly.

3-Ply Cutters(Outer Cutting Edge, Intermediate Cutting Edge, Inner Cutting Edge)

■Compatible with Pipe-Drilling

Pipes and curved-surface materials can be drilled at a throat depth of 25 mm.

Compatible with Pipe-Drilling

■Hole Saw Drilling Efficiency

Hole saw drilling has a smaller cutting area compared to steel drills, enabling short-time drilling.

Hole Saw Drilling Efficiency

■Drilling swarf discharge groove
Drilling swarf is efficiently discharged through the discharge grooves that are also compatible with thick steel plates. Clogging of drilling swarf between the work material and cutting edge makes drilling impossible, which leads to tips cracking and chipping.
■Shavings Escape Hole
An escape hole, which is convenient for shavings removal, is equipped with hole saws of all diameters.
After removing the main unit from the motor, insert the metal rod that fits through the hole, etc., into the shavings escape hole and push out debris.
■Newly developed step center drill
Two-step structure of the center drill tip dampens impacts that occur when the center drill passes through, preventing cracking of the tungsten carbide/ultra-hard tip.
■10 mm/13 mm chuck combination shank Allows for most drill chuck diameters.

■Appropriate Rotation Speed

■Use the drill at a rotation speed appropriate for the drilling work material and diameter.
■When drilling a thick plate with a thickness of 5 mm or more or for continuous cutting, select a lower rotation speed.

Appropriate Rotation Speed

■Peripheral Speed

Stainless Steel	Common Steel	Aluminum
25-35 m/min	40-60 m/min	60-100 m/min

Securely chuck the three-surface section of the shank to prevent swinging or falling.
Do not reduce the rotation speed excessively during drilling. Jamming or tip cracking may result.
Do not hit the cutting edges of the tungsten carbide/ultra-hard tip against any hard object or allow strong contact with the work material that may occur when the center drill passes through. The tip will crack.
In the case of continuous drilling using a drilling machine, watch out for overheating of the cutting edge and use cutting fluid or stop drilling to cool the cutting edge.

Watch out for impacts that may occur when the center drill passes through!

SPECIFICATION

T.C.T. hole saw Meta-core TR (MCTR Type)

Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)
MCTR-14	14	MCTR-25	25	MCTR-36	36	MCTR-47	47
MCTR-15	15	MCTR-26	26	MCTR-37	37	MCTR-48	48
MCTR-16	16	MCTR-27	27	MCTR-38	38	MCTR-49	49
MCTR-17	17	MCTR-28	28	MCTR-39	39	MCTR-50	50
MCTR-18	18	MCTR-29	29	MCTR-40	40	MCTR-51	51
MCTR-19	19	MCTR-30	30	MCTR-41	41	MCTR-52	52
MCTR-20	20	MCTR-31	31	MCTR-42	42	MCTR-53	53
MCTR-21	21	MCTR-32	32	MCTR-43	43	MCTR-54	54
MCTR-22	22	MCTR-33	33	MCTR-44	44	MCTR-55	55
MCTR-23	23	MCTR-34	34	MCTR-45	45	MCTR-60	60
MCTR-24	24	MCTR-35	35	MCTR-46	46	MCTR-61	*61
Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)	Size	Diameter(mm)
MCTR-62	*62	MCTR-75	75	MCTR-80	80	MCTR-95	95
MCTR-65	65	MCTR-77	*77	MCTR-85	85	MCTR-100	100
MCTR-70	70	MCTR-78	*78	MCTR-90	90	MCTR-110	110
						MCTR-120	120

Center drill (HSS) Ejector Spring

Size	Diameter(mm)	Size	Hole Saw Size(mm)
STR-6SC	6	MCTR KS-No.1	20-120
STR-6	6

Meta-core TR (Tool Box Set)

Size	Set Dia(mm)
TB-25	21
TB-27	21
TB-28	22
TB-32	25

Drilling And Cutting, Japan, Unika

USES

■3-Ply Cutters

■Compatible with Pipe-Drilling

■Hole Saw Drilling Efficiency

■Drilling swarf discharge groove

■Shavings Escape Hole

■Newly developed step center drill

■10 mm/13 mm chuck combination shank Allows for most drill chuck diameters.

■Appropriate Rotation Speed

■Peripheral Speed

SPECIFICATION

Related Products

YOSHITAKE GPR-2000 Primary Pressure Regulating Valve

Furuto Industrial (Monf) No.821 Easy curing II

Chiyoda Seiki GS-140LS/GS-140LS-H Medium Flow Self-powered Pressure Regulator (Primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 150 m3/h・Air)

Kawasaki KPT-370 Belt Sander (10mm)

Urakawa ZTN60×77 ZTN Series JEC and JEM certified products

UHT Corporation phi6mm Vitrified Grinding Wheels For Spindle No.1

REQUEST QUOTATION

PAYMENT

MAKER

TOOLS & EQUIPMENT

PLANT FACILITIES

CONSTRUCTION

STEEL MATERIAL

LINK

kouei_trading

Weight Calculation