Drilling and Cutting, Japan, Unika
UNIKA TL/TLS Type T-Lock

Manufacturer: UNIKA
Model: TL type (Trivalent chrome treatment), TLS type (Stainless steel), Drill for T-lock (For extrusion molding plate)
- ■As the main body diameter and the plate width are the same, anchoring is possible by drilling from above the fixture.
- ■TLS type is completely made of stainless steel which is resistant to rust. Used extensively even in humid places.
Check necessary hollow width on the back of wall when installing.
Uses
Hollow wall•Extruded cement panel
- Drill holes of the determined preparation hole diameter.
- Insert the T-lock into the preparation hole.
- The plate becomes vertical and can be fixed.
- Tighten equipment with a nut to complete installation
■Uses
Installation of bracket, equipment and handrail.
- SPECIFICATIONS
TL type (Trivalent chrome treatment)\
Size | Thread size | Dia(mm) |
TL-630 | M6 | 7 |
TL-640 | ||
TL-650 | ||
TL-835 | M8 | 8 |
TL-840 | ||
TL-845 | ||
TL-850 | ||
TL-855 | ||
TL-860 | ||
TL-865 | ||
TL-870 | ||
TL-875 | ||
TL-880 | ||
TL-890 | ||
TL-810 | ||
TL-1050 | M10 | 10 |
TL-1070 | ||
TL-1090 | ||
TL-1010 | ||
TL-1250 | M12 | 12 |
TL-1270 | ||
TL-1210 |
TLS type (Stainless steel)
Size | Thread size | Dia(mm) |
TLS-630 | M6 | 7 |
TLS-640 | ||
TLS-650 | ||
TLS-840 | M8 | 8 |
TLS-850 | ||
TLS-860 | ||
TLS-870 | ||
TLS-880 | ||
TLS-890 | ||
TLS-810 | ||
TLS-1050 | M10 | 10 |
TLS-1070 | ||
TLS-1090 | ||
TLS-1010 | ||
TLS-1250 | M12 | 12 |
TLS-1270 | ||
TLS-1210 |
Drill for T-lock (For extrusion molding plate)
Size | Anchor size | Dia(mm) |
TLD-7.5 | M6 | 7.5 |
TLD-9.0 | M8 | 9 |
TLD-11.0 | M10 | 11 |
TLD-13.5 | M12 | 13.5 |
Related Products
-
Ross Asia CrossMirror CM26 series double valve Safety cat. 4 PL e, internal monitoring, manual reset
-
HANKOKU RSA-P Motor Siren (Single Phase)
-
Tosei Sharyo AW Series Wheel Gold Caster
-
Kikusui Tape 852 PVC Electrical Tape
-
Nippon Chemical Screw PPS/NT(M) PPS/hex nut
-
Satuma Denki PB3-PL3-Series Pad-type Disk Brakes AC-operated DC Electromagnetic System