Japan, Yoshitake
YOSHITAKE GD-43G-10 Pressure Reducing Valve For Water And Oil And Air
Made in Japan
Manufacturer: Yoshitake
Model: GD-43G-10
Compact, corrosion-resistant PRV for air and other non-dangerous gases
Specifications
| Features | For air, stainless steel, flanged | |
|---|---|---|
| Type | Direct-acting type | |
| Specifications | Product type | Direct-acting type |
| Nominal size | 15A (1/2″) – 25A (1″) | |
| Application | Air, CO2 gas, nitrogen gas | |
| End connection | JIS 10KFF flanged | |
| Inlet pressure | Max. 1 MPa | |
| Reduced pressure | 0.02 – 0.5 MPa (*) | |
| Min. differential pressure | 0.05 MPa | |
| Max. pressure reduction ratio | 20 : 1 | |
| Working temperature | 5 – 90 degree(C) | |
| Material | Body | Stainless steel (SCS14A) |
| Valve and valve seat | FKM and stainless steel | |
| Diaphragm | FKM and PTFE | |
Remarks
* Reduced pressure
(A): 0.02-0.1 MPa
(B): 0.1-0.25 MPa
(C): 0.25-0.5 MPa
* For sterilization steam, the maximum temperature is 130degree(C) and avoid continuous use for more than 30 minutes.
About flow rate
Selection data：
Dimensional drawing
Related Products
-
Okazaki Seiko BCER Top Solid Carbide End Cutting Reamers (Straight Shank)
-
Furuto Industrial (Monf) No.412 Single-sided Waterproof Airtight Tape
-
Showa Measuring Instruments WBJ Tension & Compression Load Cells
-
Murata Self-supporting small needle 12021-F
-
Organo RD Two-Stage RO (Reverse Osmosis) System
-
SAKUSAKU 2SS-8.0-R0.5 Carbide Radius End Mill 2-Flute
