,

DIJET EXSKS SKS Extreme 09type

Product Made in Japan
Manufacturer: DIJET INDUSTRIAL CO., LTD
Model: EXSKS

Indexable tool for high feed machining

“SKS EXTREME” EXSKS type, next-generation high feed machining cutter

Possible to high feed machining on fz=2mm/t in case of Max. depth of cut (ap)= 3mm.

Line-up

Cat. No.TypeTool Diameter (ΦDc)
EXSKSFacemill typeΦ50~Φ160

Feature of products

EXSKS

High rigidity specification for high depth of cut and high feed machining

The thick, highly rigid inserts (6 corners on double sides) and the highly rigid G-Body body are firmly clamped together in a wedge-shape.
It also excels in ramping and pocket milling, and enables high feed machining with L/D=6 or more.

EXSKS

”PM insert” for extreme high cutting depth on Max.ap=3mm

Suitable for face milling of ap=1.4mm or more and shape machining  such as pocket machining.

"PL insert" for stable digging on Max.ap=2mm.

“PL insert” for stable pocket milling on Max.ap=2mm.

Suitable for machining shapes such as pocket milling with ap = 0.6 mm to ap = 1.2 mm. The composite shape of the straight and radius cutting edges reduces fluctuations in cutting resistance during corner machining, realizing stable machining and extending tool life.

FAQ about Indexable tool for high feed machining

        What is the difference between PM insert and a PL insert?

The PM type is used for high depth of cut with a maximum depth of cut of up to 3 mm.
It is the first recommended for flat surface machining or when you want to increase the amount of chip evacuation.
The PL type has a maximum ap of 2 mm,
but is perfect for machining with a long overhang length, pocket machining, and machining materials with about 40 HRC.

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top