Made in Japan
Manufacturer: Fukuda Seiko
Model: Ti6Al4V (Gun Drill)

Features

The “MAM” in Tribo-MAM is an acronym for Modulation Assisted Machining, which is a vibration cutting technology that vibrates cutting tools.
It creates a momentary space between the blade and the material for better chip handling and lubricity.
This reduces the life of the drill and extends the life of the tool.

• Increase the production efficiency of small-diameter deep hole processing.
• It is ideal for deep hole drilling in difficult-to-cut materials.
• Tool life can be extended.
• The chips will be finer, so it will be easier to process.

Ti6Al4V (Gun Drill)

• Botek single-edged carbide gun drill
  • Base setting: 4200 rpm
  • Feed rate: 0.016 mm/rev
  • Diameter: Ø 3.2 mm, Length = 100 mm
  • Aspect ratio = 30
  • Blaser Vascomill 10 (Coolant)

Optimized with TriboMAM

• Feed rate: 0.032 mm/rev
• Feed rate doubled

use

• Small-diameter deep hole drilling, such as bone screws and engine valve drilling

• Capable of deep hole drilling into difficult-to-cut materials
• Coolant through reduces heat generation
• Reduced tool wear and longer life

Collet Size: ER11

Holder size:
φ19.05 mm,
φ20 mm,
φ22 mm, etc.

controller

Controller Size
・432 (L) × 330 (D) × 89 (H) (mm)

TriboMAM Specifications

• Feed Rate: Up to 0.150 mm (0.006 inches), programmable
• Drill Diameter: Up to 5 mm (0.197 inches)
• Modulation Frequency: Up to 1000 Hz
• Power Amplifier Current: 1A
• Power Cable: RG188 coaxial cable
• Power Input Requirements: 110 V / 60 Hz or 220 V / 50 Hz
• Coolant Maximum Pressure: 8.6 MPa (1250 psi)
• Weight: 330g (0.73 lbs)

---

• Kouei is Distributor/Agent of Fukuda.
  Other items of Fukuda
  Request the quotation for Fukuda.