Honda Kiko, Japan
Honda Kiko BLS Latex emulsion pump
Product Made in Japan
Manufacturer : Honda Kiko
Model : BLS
Features
- Flow rate: 0.1-4.8m 3 /min
- Head: 8-95m
- Temperature: 0-80℃
- Prevention of Environmental Pollution
- Progress of productivity
- Full-Open type Impeller
- Buffed Casing & Impeller
Free from dogging and leakage resulting from polymerization (coagulum) of Latex liquid.
Compared with conventional pumps, BLS does not required frequent overhauling with lower maintenance cost.
BLS has a low polymerization rate of latex liquid, which is one-thirtieth of conventional pumps.
It helps maintenance of the original latex quality.
In addition to transforming chemically stable synthetic latex liquid, BLS can also be used for clog-free transfer of more chemically unstable 750mPa.s-1000mPa.s, and 1400mPa.s natural latex liquids.
Applications
- Transportation of Latex liquid
- Emulsion liquid
- Crumb slurry
- Viscous liquid and Adhesive liquid
Design Data
| Materials | 1. Stainless Steel SCS13A / SCS14A / SCS16 2. Other specific materials pump may also be produced |
| Temperature | 0℃~80℃ |
| Shaft seal | 1. Specially designed seal construction for latex a. Knife-edge mechanical seal + Gland packing construction back up type available b. Knife-edge mechanical seal + Multi-spring type mechanical seal construction back up 2. In addition, other Mechanical seal (single or double) and Gland packing may be installed on request |
| Bearing | Ball bearing (Oil bath system) Water jacketed bearing housing is available when pumping temperature exceeds 120°C |
Design Concept
Materials List
| Item | Part Name | Stainless Steel | ||
|---|---|---|---|---|
| 1 | Casing | SCS13A | SCS14A | Stainless steel |
| 2 | Suction cover | SCS13A | SCS14A | Stainless steel |
| 5 | Bracket | FC200 | FC200 | Cast Iron |
| 10 | Bearing cover | FC200 | FC200 | Cast Iron |
| 10A | Bearing cover | FC200 | FC200 | Cast Iron |
| 18 | Seal case | SUS304 | SUS316 | Stainless steel |
| 23 | Impeller | SCS13A | SCS14A | Stainless steel |
| 58 | Lantern ring | SUS304 | SUS316 | Stainless Steel |
| 60 | Gland cover | SUS304 | SCS316 | Stainless steel |
| 90 | Shaft | SUS304 | SCS316 | Stainless steel |
| 95 | Bearing nut | SUM24L | SUM24L | Steel |
| 97 | Key (Coupling) | S45C | S45C | Steel |
| 97A | Key (Impeller) | SUS304 | SUS316 | Stainless steel |
| 107 | Shaft sleeve | SUS304 | SUS316 | Stainless steel |
| 122 | Deflector | CR | CR | CR |
| 130 | Ball bearing | SUJ | SUJ | Steel |
| 131 | Ball bearing | SUJ | SUJ | Steel |
| 147 | Gland packing | Wide choice of materials | ||
| 152 | Mechanical seal | |||
| 153 | Oil seal | NBR | NBR | Rubber |
| 153A | Oil seal | NBR | NBR | Rubber |
| 163 | Oil Gauge | Glass | Glass | Glass |
| 164 | O ring | NBR | NBR | Rubber |
| 164 E | O ring | NBR | NBR | Rubber |
| 167 | Oil Cap | Acryl | Acryl | Acryl |
| 208 | Bearing coller | S45C | S45C | Steel |
| 210 | Bushing | PTFE | PTFE | PTFE |
| 502 | Gasket | Wide choice of materials | ||
| 502B | Gasket | Three Sheet | Three Sheet | Three Sheet |
| 502C | Gasket | Three Sheet | Three Sheet | Three Sheet |
Accessories
- Base Plate
- Coupling
- Guard
- Anchor bolts/nuts
- Drain Plug
Dimensional Charts
Related Products
REQUEST QUOTATION
PAYMENT
LINK
