Chemical, Isolite Insulating, Japan
Isolite Insulating Isowool VFS

Manufacturer: Isolite Insulating
ISOWOOL VFS
Features
Non-wettable characteristic to the melting metals, high melting point, heat insulation property and durability
Slurry made of ISOWOOL BULK, inorganic binder, a tiny amount of organic binder, and water is molded and dried to make VFSs in a variety of forms such as flat plates, sleeves, cones, etc. With its non-wettable characteristic to the melting metals, high melting point, heat insulation property and durability, VFSs are used in the sections to have direct contact with the melt in aluminum molding and processing processes
Typical Applications
1. Tap-out-corn for melting aluminum
2. Riser sleeves, Hot tops
3. Combustion chambers of water boiler
4. Hot face lining of electrical furnace
5. Burner block, Peephole tile
6. Riser pipe and Skid-pipe of reheating furnace
7. Insulating cover for Continuous casting nozzle
8.High temperature gasket and packing
SLEEVE C:
Insulating pipe special for riser sleeve or riser system of special steel and non-ferrous metals.
Quality
1260 VFS | 1400 VFS | 1600 VFS | SLEEVE C | ||
Max. Service Temperature(℃) | 1260 | 1400 | 1600 | 1260 | |
Bulk Density (kg/m³) | 250 | 250 | 180 | 300 | |
Modulus of Rupture(MPa) | 0.49 | 0.49 | 0.20 | 1.47 | |
Loss on Ignition (%) at 1100X5h | 6 | 4 | 5 | 5 | |
Linear Shrinkage (%) at( ℃)X24h | 1.7 (1100℃) | 1.4 (1200℃) | 1.2 (1400℃) | 1.7 (1100℃) | |
Thermal Conductivity | at 400℃ | 0.09 | – | – | 0.09 |
at 600℃ | 0.12 | 0.12 | 0.13 | 0.12 | |
at 800℃※ | 0.16 | 0.16 | 0.20 | 0.16 | |
at 1,000℃※ | – | 0.23 | 0.28 | – |
Packaging
According to the shapes.
Related Products
-
Asahi Bagnall Cat.No.900 Type WD Pantograph
-
Organo ORPERSION E266 Series Slime Control Agents for RO Membranes
-
Asahi Weldex CS-7WC Fillet/Butt Multi Curved Welding Carriage
-
Watanabe A5000 Series A5□□□-10 AC Current Digital Panel Meter
-
Vessel No.BH-40 Double-End Socket (A/F 8 / 9, Ph No.2 x 65)
-
Kitz AKTAF Floating Type 600 Brass Ball Valves (Full Bore)