Japan, Kakuta
Kakuta No.PA250 Hook Clamp

Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: No.PA250
No.PA250 (Hook Clamp)
Category | Hook Type |
---|---|
Model Number | No.PA250 |
Weight | 285g |
Holding Capacity | 1.7kN(170kgf) |
Material | Steel(SPCC) |
Mounting Method | Flange Base |
Surface finish | Nickel Plating |
CAD data

Stroke 105mm
Feature And Application
- Hook the U or hook type bar and pull to hold.
- Optimal for machine and equipment parts.
Caution
- The holding capacity is for reference.
- Do not give the shock, vibration and internal pressure which causes a failure.
- Caution to pinch the fingers
Toggle Clamp Instruction
Read before use
<Check before use>
- The holding capacity noted in catalogue is maximum value.
- The value cannot be guaranteed as it bepends on the condition of use.
- Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
- When selecting and using clamps, allow enough margin for the holding capacity.
<Precaution>
- Mounting Method: Mount by fixing bolts or by welding securely.
- Test: Before mount, test the action.
- Extension Handle: Using with an extension handle or arm will have a negative effect on durability.
- Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
- Lubrication: Apply oil to the slides and friction parts on a regular basis.
- Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
- Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm, damage and transform.
- Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
- Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.
Related Products
-
Kanetec KCT-U Water-cooled Tilting Electromagnetic Chuck
-
TONE 8A Dual Opening Impact Socket Set (for Truck Wheel)
-
SAKUSAKU DIMJ4 6L Insert For Grooving / Parting Off With J-type Chip Breaker
-
Kunimoto 1024601&1024900 Temporary Tilting Slope Tool
-
SUGIYASU ST38E Hydraulic Stacker
-
Saitamaseiki AK-5901 Single Action and Double action Sanders