Japan, Kakuta
Kakuta No.X12 Hold Down Clamp
Product Made in Japan
Manufacturer: Kakuta Co., Ltd
Model: No.X12
No.X12 (Hold down clamp (Vertical Handle))
Category | Hold down Clamp |
---|---|
Model Number | No.X12 |
Weight | 890g |
Holding Capacity | 2.0kN(200kgf) |
Material | Steel(SPCC) |
Mounting Method | Flange Base |
Surface finish | Trivalent Chromate |
CAD data
Feature and Application
- A toggle clamp is designed to hold a workpiece by one-action operation after initial setting.
- It is easy to introduce and low cost compare with air or hydraulic.
- Optimal for repetitive work.
- For inspection, welding, assembly, machining and press fit.
- You can use for woodworking and DIY.
- ‘This toggle clamp with cam mechanism is adjustment-free to +/-1.5mm.
- Optimal for holding uneven thickness workpiece.
Caution
- The holding capacity is for reference. Max. value is by using hex bolt.
- The holding capacity will decrease toward the tip of clamp arm.
- Do not give the shock, vibration and internal pressure which causes a failure.
- Caution to pinch the fingers.
Toggle Clamp Instruction
Read before use
<Check before use>
- The holding capacity noted in catalogue is maximum value.
- The value cannot be guaranteed as it bepends on the condition of use.
- Use caution as the holding force will drop due to depending on the holding position, bolt adjustment and type of bolt uses.
- When selecting and using clamps, allow enough margin for the holding capacity.
<Precaution>
- Mounting Method: Mount by fixing bolts or by welding securely.
- Test: Before mount, test the action.
- Extension Handle: Using with an extension handle or arm will have a negative effect on durability.
- Holding Position: It does not hold or clamp on the way of actuating. It only can hold at holding position. (Toggle and cam mechanism at work)
- Lubrication: Apply oil to the slides and friction parts on a regular basis.
- Chip removing: When using in place where there are chips, remove chips around the main unit, especially the rivets and rotating parts by using an airgun before clamping & unclamping.
- Inspection: Inspect regularly for bolts and nuts that secures the body and clamp arm, damage and transform.
- Operating environment: Using in the corrosive or inappropriate environment causes mulfanction, damage and transform.
- Precaution: Do not insert your hands and fingers in range of the action and wear protective gloves for safety when mounting or operation. Do not use at exceed the holding capacity.
Related Products
-
Kanetec LM-EC Large Electromagnetic Lifma
-
SAKUSAKU 2SS-25D 10.0S Carbide Square End Mill 2-Flute
-
SAKUSAKU SC-42M-D Carbide Rotary Burr Cylinder Radius End Shape
-
Chiyoda Tsusho ALE-6/8/10/12 ALE TYPE L-FLEX TUBING ANTI-SPATTER PUR TUBING
-
SAKUSAKU DIMJ4 6R Insert For Grooving / Parting Off With J-type Chip Breaker
-
Kakuta No.PA250 Hook Clamp