Japan, Kaneko Sangyo
Kaneko Sangyo M31 Series Manual Reset Solenoid Valve
Manufactuer: Kaneko Sangyo
Model: M31 Series
Summary
In the solenoid valve is used for emergency solenoid valve and Maniaru reset operation is performed for the power outage, automatically switches the solenoid valve typically Maniaru expression Operating reset once again. or energized, even if the power failure, unless manually reset is semi-automatic valve with a mechanism that does not change the operating position.
Feature
Can be used even with a pressure differential of zero as main and pilot valves are directly connected to each other.
Pressure losses are small as nominal size is equal to seat size.
Products certified for high-pressure gas services are also available.
Designed so that the valve after once actuated does not change its state unless it is manually reset.
Precautions
Install the valve with the solenoid upward with respect to horizontal piping (permissible angle of inclination is within 30 degrees to the vertical).
Limited flow directions (align with the arrow indicating the flow direction).
Limited flow directions (align with the arrow indicating the flow direction).
Remove air through vent valve in cases where the working fluid is a liquid.
Do not paint external moving parts.
Standard specification
- FLUID
- GAS , LIQUID , STEAM
- WORKING PRESSURE
- See below
- FLUID TEMPERATURE
- As for working temperature you can select any KANEKO model no. that will have different inner construction. The using temperature is available form 5deg.C to 200deg.C.
- AMBIENT TEMPERATURE
- -20℃ ~ 40℃(But to be used within the range of fluid dose not frozen.)
- VISCOSITY OF FLUID
- 250cst or lose
- DUTY CYCLE
- 100% CONTINUOUSLY RATED
- OPERATING VOLTAGE RANGE
- +10%,-15%
- ELECTRICAL SPECIFICATIONS
- See below
WORKING PRESSURE
BODY MATERIAL | CONNECTION TYPE | NOMINAL DIAMETER | PRESSURE | |||
---|---|---|---|---|---|---|
0~1.0MPa | 0~1.6MPa | 0~2.0MPa | 0~3.0MPa | |||
JIS , BRONZE | SCREWED | 15 ~ 25A | WORKING PRESSURE RANGE | |||
32A | WORKING PRESSURE RANGE | |||||
FLANGED | 15 ~ 25A | WORKING PRESSURE RANGE | ||||
32A | WORKING PRESSURE RANGE | |||||
40A,50A | WORKING PRESSURE RANGE | |||||
STAINLESS STEEL | SCREWED FLANGED |
15A ~ 25A | WORKING PRESSURE RANGE | |||
40A,50A | WORKING PRESSURE RANGE |
ELECTRICAL SPECIFICATIONS
AC | DC | |||
---|---|---|---|---|
V/Hz | INRUSH A | HOLDING A | V | A |
COIL INSULATION CLASS : B | ||||
100/50 | 9.0 | 0.55 | 24 | 2.0 |
100/60 | 9.5 | 0.65 | 48 | 1.0 |
110/60 | 8.5 | 0.50 | 100 | 0.6 |
200/50 | 5.5 | 0.30 | 110 | 0.4 |
200/60 | 6.0 | 0.33 | 125 | 0.45 |
220/60 | 5.0 | 0.27 |
Product Image
M31 – 15 ~ 32 – A44、AE44-BS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 80 | 288 |
20 | 210 | 160 | 90 | 298 |
25 | 210 | 160 | 100 | 298 |
32 | 210 | 160 | 130 | 303 |
M31 – 15 ~ 32 – D44-BS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 80 | 338 |
20 | 210 | 160 | 90 | 348 |
25 | 210 | 160 | 100 | 348 |
32 | 210 | 160 | 130 | 353 |
M31 – 15 ~ 32 – DE44-BS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 80 | 340 |
20 | 210 | 160 | 90 | 350 |
25 | 210 | 160 | 100 | 350 |
32 | 210 | 160 | 130 | 355 |
M31 – 15 ~ 32 – A44、AE44-SS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 100 | 298 |
20 | 210 | 160 | 100 | 298 |
25 | 210 | 160 | 100 | 298 |
32 | 210 | 160 | 100 | 298 |
M31 – 15 ~ 32 – D44-SS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 100 | 348 |
20 | 210 | 160 | 100 | 348 |
25 | 210 | 160 | 100 | 348 |
32 | 210 | 160 | 100 | 348 |
M31 – 15 ~ 32 – DE44-SS TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 100 | 350 |
20 | 210 | 160 | 100 | 350 |
25 | 210 | 160 | 100 | 350 |
32 | 210 | 160 | 100 | 350 |
M30 – 15 ~ 32 – A44、AE44-BF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 105 | 288 |
20 | 210 | 160 | 120 | 298 |
25 | 210 | 160 | 130 | 298 |
32 | 210 | 160 | 155 | 303 |
M31 – 15 ~ 32 – D44-BF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 105 | 338 |
20 | 210 | 160 | 120 | 348 |
25 | 210 | 160 | 130 | 348 |
32 | 210 | 160 | 155 | 353 |
M31 – 15 ~ 32 – DE44-BF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 105 | 340 |
20 | 210 | 160 | 120 | 350 |
25 | 210 | 160 | 130 | 350 |
32 | 210 | 160 | 155 | 355 |
M31 – 15 ~ 25 – A44、AE44-SF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 170 | 298 |
20 | 210 | 160 | 170 | 298 |
25 | 210 | 160 | 170 | 298 |
M31 – 15 ~ 25 – D44-SF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 170 | 348 |
20 | 210 | 160 | 170 | 348 |
25 | 210 | 160 | 170 | 348 |
M31 – 15 ~ 25 – DE44-SF TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
15 | 210 | 160 | 170 | 350 |
20 | 210 | 160 | 170 | 350 |
25 | 210 | 160 | 170 | 350 |
M31 – 40 ~ 50 – A44、AE44 TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
40 | 300 | 220 | 185 | 370 |
50 | 300 | 220 | 210 | 378 |
M31 – 40 ~ 50 – D44 TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
40 | 300 | 220 | 185 | 418 |
50 | 300 | 220 | 210 | 426 |
M31 – 40 ~ 50 – DE44 TYPE
NOMINAL DIAMETER | V:FUNCTION RC/TC | V:FUNCTION RD/TD | MOUNTING LENGTH | H |
---|---|---|---|---|
40 | 300 | 220 | 185 | 420 |
50 | 300 | 220 | 210 | 428 |
Related Products
-
KORI SEIKI 7922 2-Stage Preset Counter
-
Tohnichi Interchangeable Head – SH Open Wrench Head
-
UNIKA AS Type Weld Anchor
-
SUGIYASU KGL40HF Platform Stacker
-
Shinano SI-SG3-CR/SI-SG3-CR-6 (6mmCollet model)/SI-SG3-CR-Q (1/4″Collet model) Straight Die Grinders Industral Air Tools
-
Chiyoda Seiki RsC-3/RsC-3D Large Flow/piston/diaphragm Pressure Regulator (primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 2300 m3/h・Air)