Japan, Kimoto Rubber Industry Co.
Kimoto Lumi Corner Guards Corners
Product Made in Japan
Manufacturer: Kimoto
Model: Lumi Corner Guards
What is Carstopper Corner Guard?
It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.
What is Lumi Corner Guard?
It is a guard that integrates a phosphorescent line that glows in the dark. It phosphores the light of sunlight and fluorescent lamps and emits vivid light in the dark for a long time. The phosphorescent material is made of resin and integrated with the main body, so there is no need to worry about it peeling off like tape. It can be used as a warning and cushioning material for pillars in corridors of hospitals and facilities that darken at night, factories, stores, condominiums, etc.
Specification
| material | Soft Vinyl Chloride Resin (PVC) |
|---|---|
| color | Luminescent type: Yellow |
| Unit of Measure | 1 pc |
| accessory | Patch plate (material: steel) * Screws are not included. |
| End caps (sold separately) | Yellow (Material: Soft vinyl chloride resin) * The end cap does not contain a phosphorescent line. |
| Mounting method | Patch plate (screw fastening) |
| remarks | ・The phosphorescent part is integrated with the guard. ・The main body is tightly manufactured to prevent it from falling off from the patch plate. ・ If there is no stock, it may take a long time to deliver. |
| product | thickness | Width (outer dimensions) | length | Patch plate hole diameter | Weight (per 1m) |
|---|---|---|---|---|---|
| Lumi Corner Guards | 16㎜ | 65㎜ | 1m、2m | 7×14 slotted holes | 2,100g |
drawing
* Click the image to enlarge the image.
Install by passing both ends of the patch through the groove on the inside of the guard.
It luminesces in the daytime and glows in the dark.
●Catalog Downloa
Construction example
- ・ Protective materials for the corners of pillars and walls in parking lots, factories, schools, public facilities, etc.
- ・ Warning and cushioning materials in hospitals, nursing homes, factories, etc.
Protection and reminder of ledges in factory walls
It is a protective and cushioning material for the protruding part of the wall and a warning in the dark.
Mounting method
● Note Both sides of the edge of the
patch plate are sharp and easy to cut your hands, so wear gloves when working.
The main body is tightly manufactured to prevent it from falling off from the batten.
(1) Set
of patch plate Drill screw holes on the pillar side at the hole position of the positioned patch plate, and attach the patch plate with screws.
(2) Set of the main body Hook the
main body to one side of the patch plate and assemble it on the patch plate while pulling the other side of the main body. The body is made tightly so that it does not slip off the batten. It will be easier to assemble if you install it while warming it with a hair dryer.
(3) Set of caps Use
commercially available adhesive and install the caps.
merit
- ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
- ・ Various sizes.
- ・ There is no color transfer like rubber.
- ・ You can also choose the construction method.
- ・ When made of rubber sponge, it has excellent cushioning.
demerit
- ・ There are few color variations.
- ・ Most of them are straight line specifications.
- ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
- ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.
Construction example
- ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
- ・ Cushioning material for the wall of the parking lot
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Pillar protection for store parking lots
Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.
Vehicle cushioning materials for truck terminals
Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.
Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto
