Japan, Kimoto Rubber Industry Co.
Kimoto Mr. Corner Corners
Product Made in Japan
Manufacturer: Kimoto
Model: Mr. Corner
What is Carstopper Corner Guard?
It buffers the impact of cars and trolleys hitting pillars and walls in parking lots and factories, and prevents damage to pillars and walls. It also reduces damage to cars, trolleys, etc. Even when a person hits the guard part, it becomes a cushion and the damage is reduced.
Who is Mr. Corner?
It is a small size corner guard with an end cap and adhesive tape. It can be used as a protective material for the corners of corridors in buildings, kindergartens, welfare facilities, hospitals, etc. Outdoors exposed to rain and wind, adhesive installation without tape is effective. In addition, since the material is soft vinyl chloride resin, it can be cut on site and the length can be adjusted.
Specification
| material | Soft Vinyl Chloride Resin (PVC) |
|---|---|
| color | Yellow, Beige, Black, Grey |
| Unit of Measure | 1 pc |
| accessory | Comes with double-sided tape (without tape is also available) |
| End caps (sold separately) |
Yellow, Beige, Black, Grey (Material: Silicone Rubber) |
| Mounting method | Double-sided tape adhesive (Cemedine Super X, Konishi Quick Dry Bond G103, etc.) * Please use a soft vinyl chloride resin that can be bonded to the material of the other party. |
| remarks | ・Length cutting is also supported. ・It is also compatible with the replacement of the guard bracket type guard part. (Compatible product: Corner-kun 35 without tape) |
| product | A | B | length | Weight (per 1m) |
|---|---|---|---|---|
| Corner-kun 25 | 6㎜ | 25㎜ | 1m、2m | 200g |
| Corner Mr. 35 | 8㎜ | 35㎜ | 1m、2m | 460g |
cross section
The Corner Mr. 25 does not have a 3mm protrusion on the inside.
The mounting surface is smooth and usually has double-sided tape
Corner End Cap
Construction example
- ・ Protective materials for the corners of pillars and walls in parking lots, factories, schools, public facilities, etc.
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Overhead protection in nurseries
Used as a cushioning material for the corners of exterior walls. The construction is attached with glue without the corner 35 tape.
Mounting method
● Clean and remove dirt, moisture, oil, etc. from the installation area.
Determine the mounting position, and then glue it with tape. If the adhesive strength does not come out, use adhesive.
* When applying by adhesive, please use no tape.
In addition, the corner does not support screw fastening. If you are considering screw fastening, please consider using guard bracket 35.
merit
- ・ The material is soft PVC and can be used for a long time. (Some materials differ depending on the product.) ）
- ・ Various sizes.
- ・ There is no color transfer like rubber.
- ・ You can also choose the construction method.
- ・ When made of rubber sponge, it has excellent cushioning.
demerit
- ・ There are few color variations.
- ・ Most of them are straight line specifications.
- ・ If the material is soft PVC, it does not have the same cushioning as a rubber sponge.
- ・ If it is made of rubber sponge, it is easy to tear and deteriorate over time.
Construction example
- ・ Protective materials for pillar corners and walls in parking lots, factories, schools, public facilities, etc.
- ・ Cushioning material for the wall of the parking lot
- • Overhead cushioning
- ・ Cover of the rising part of the flower bed of the nursery school or kindergarten
Pillar protection for store parking lots
Product: Guard Bracket 65 Yellow It is used as a protective and cushioning material for the corners of pillars in
store parking lots.
Vehicle cushioning materials for truck terminals
Product: D-type car stopper It is installed as a buffer material for vehicle impact in truck terminals.
Kouei is Distributor/Agent of Kimoto Rubber Industry Co.,LTD.
Other items of Kimoto
Request the quotation for Kimoto
Related Products
REQUEST QUOTATION
PAYMENT
LINK
