Made in Japan
Manufacturer : Nippon Chemical Screw
Model :PVDF/PH(M-L)
Vinylidene fluoride resin (+) pan head machine screw.
| Continuous use temperature | 150°C/302°F |
| Combustion quality | UL94 V-0 equivalent |
| M | M3 | M4 | M5 |
| pitch | 0.5 | 0.7 | 0.8 |
| D×H | 5.5×2 | 7×2.6 | 9×3.3 |
| L(mm) | 5 | ─ | 100 | ─ |
| 6 | 100 | 100 | ─ |
| 8 | 100 | 100 | ─ |
| 10 | 100 | 100 | 100 |
| 12 | 100 | 100 | 100 |
| 15 | 100 | 100 | 100 |
| 16 | 100 | 100 | 100 |
| 20 | 100 | 100 | 100 |
| 25 | 100 | 100 | 100 |
Sales unit Quantity
Torsional rupture torque
| Unit/Unit | M1.7 | M2 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| N・m | – | – | – | 0.11 | 0.26 | 0.44 | 0.81 | 1.56 | 3.16 | 5.73 | – |
Tensile rupture force
| Unit/Unit | M1.7 | M2 | M2.6 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | M16 |
| N | – | – | – | 227 | 429 | 688 | 960 | 1803 | 2824 | 4249 | – |
- We use raw materials that are RoHS2 compliant.
- Black spots (sludge) may appear on the exterior, but this does not affect performance.
- Please use in combination with a nut made of the same material as the thread pitch may shift during molding.
- If a nut is not used, the fit with the female thread should be 20 mm or less.
- The remaining gate at the screw tip is less than 5% of the length (L).
Features
- The values in the table are reference values and are not guaranteed values.
- Please use a torque driver and torque wrench for tightening. The recommended tightening torque is 50% of the breaking torque value under use.
- Heat resistance and chemical resistance vary depending on usage conditions, so be sure to test under usage conditions beforehand.
- There may be slight discoloration depending on the lot and various conditions.
- Inventory sizes, shapes, and manufacturers of materials used are subject to change without notice.
