Japan, Medical Equipment
OSC02TF101 Open Care System
Model: OSC02TF101
Features
1. Three Level safety system
2. Servo Mode & Manual Mode
3. Baby Temp. Display in degrees centigrade & Fahrenheit
4. Separate display for Set Temp.
5. Bar Graph to indicate heater output
6. Under Temp. indication
7. Over Temp. indication & alarm
8. Feed alarm 2 hourly (auto mute facility)
9. Apgar Timer incorporated
10. Warmer Usage hour indication
11. Self diagnosis facility
Accessories at extra cost
Cargo to hold oxygen cylinder, Neovac slow suction, Manometer, Humidifying bottle with folow meter, Resuscitation kit, Air oxygen blender
Specifications
| Model | OSC 02TF 101 | |||
| Height | Approx. 1880mm | Electronic Controller | Micro Controller based servo Proportionate control with feather touch keys for temp. setting | |
| Baby Bed Size | Approx.735 x480mm | |||
| Mnitor Tray Size | i)325mm x225mm | Display | 3 Digit Green LED for indicating set temp, Apgar time | |
| ii)295mm x225mm | 4 Digit Green LED for indicating baby’s actual temp. | |||
| Working level | 1000mm from ground | Alarms | Over Temp, 2nd safety active, sensor fail, | |
| Tilt | +/-8degrees | 3rd safety active, Apgar time, Feed time | ||
| Side Supports | Acrylic Drop Down Type | Observation Lamp | Halogen (12V, 24W) | |
| Electrical Rating | 230V+/-10% 50Hz | Heater wattege | 650W | |
| Best environment for operation | 22 to 28 degrees | Heater type | Ceramic/ Quartz crystal | |
Related Products
-
Watanabe A9000 Series A9□11 Digital panel meter for DC voltage
-
Chiyoda Seiki EPR-1000PH Primary Pressure Control Valve Holding Pressure Valve (primary pressure: 20.0 MPa or less/set pressure 10.0 to 20.0 MPa, standard flow rate: 170 m3/h・Air)
-
Furuto Industrial (Monf) Z3 Frame Curing Tape
-
YOSHITAKTE GD-46PP Water Pressure Reducing Valve
-
Kakuta No.43B Hold Down Clamp
-
Kitz EN16FCW/EN16FCWI PN16 Iron Gate Valve
