- Home
- Products
- Ross Asia M35 series double valve Safety cat. 4 PL e, external monitoring with and without soft start
Japan, Ross Asia
Ross Asia M35 series double valve Safety cat. 4 PL e, external monitoring with and without soft start
Made in Japan
Manufacturer : Ross Asia
Model :M35 series double valve
Valve Technical DataSafe Exhaust Control Reliable Double Valves M35 Series Product Overview
Safe Exhaust Safety Function
The M35 Series valve safety function is to shut off supply or pneumatic energy and to exhaust any pneumatic energy from downstream of the valve.
The M35 Series valve is designed to supply air to a zone or entire machine/system until signaled to shut off and exhaust residual downstream pneumatic energy from the machine. Thus, reducing the hazards associated with the presence of residual energy during employee access and/or minor servicing.
Features
Specifications
PRODUCT CREDENTIALS
Ordering Information
MODEL NUMBER CONFIGURATOR(3-Way 2-Position Valves)
Valve Connector Pinouts | |
Solenoid | |
Pressure Sensor |
Digital Pressure Transducer Specifications
Safety Solution Options
Safe Air Entry System Assemblies with M35 Series Double Valves
Air Entry System Assemblies with manual Lockout L-O-X ® valve, air preparation FRL combinations, M35 Series Safe Exhaust Double Valve with or without Soft-Start module, and with Drip Leg option are available.
Valve Operation
Conditions at Start |
Inlet 1 is closed to outlet 2 by both valve elements A and B. Outlet 2 is open to exhaust 3. Pressure signals at both sensors SA and SB are exhausted. Sensors outputs SA and SB are ON.
|
Normal Operation |
Simultaneously energizing both solenoids actuates both pilots and causes valve elements A and B to shift. Inlet 1 is then connected to outlet 2 via crossflow passages C and D. Exhaust 3 is closed. Sensing pressure signals go to each pressure sensor and become equal to inlet pressure. Sensors outputs SA and SB are OFF.
|
Detecting a Malfunction |
A malfunction in the system or the valve itself could cause one valve element to be open and the other closed.
Air then flows past the inlet poppet on valve element A, into crossflow passage D, but is substantially blocked
by the spool portion of element B. The large size of the open exhaust passage past element B keeps the pressure
at the outlet port below 2 % of inlet pressure. Full sensing air pressure from side A goes to sensor SA, and a
reduced pressure goes to sensor SB. This full pressure signal causes sensor outputs SA to turn OFF. Sensor
outputs SB, with a reduced pressure signal, does not turn OFF. An external monitoring system can detect
the malfunction by monitoring the condition of the sensors SA and SB. The external monitoring system may
then react accordingly by shutting down the power to the valve solenoids and any other components deemed
necessary to stop the machine.
|
Valve Reset | Automatic reset by de-energizing the solenoids. |
Valve Technical Data
Dimensions-Inches(mm) | ||
Model with Soft-Start EEZ-ON ® Module
|
Model with Built-In Exhaust | Model with Threaded Exhaust Flange |
Model without Soft-Start
EEZ-ON ® Module
|
Downloadable CAD models available.
Valve Schematic | |
with Soft-Start EEZ-ON ® module
|
|
without Soft-Start EEZ-ON ® module
|
EXHAUST TIME
Accessories
PRESSURE GAUGE
PRESSURE TRANSDUCERS
ENERGY RELEASE VERIFICATION
PREWIRED ELECTRICAL CONNECTORS
EXHAUST SILENCERS
Silencers for Valves with Threaded Exhaust Flange Option
MODULAR CONNECTION
M35 Series valves have both modular receptacles for piping and female threaded ports inside receptacles, which allows either modular connection or direct piping. Mounting accessories listed below are used for modular connection to ROSS MD Series filter-regulator units.