Japan, Ross Asia
Ross Asia MD3 & MD4 Port block
Made in Japan
Manufacturer : Ross Asia
Model : MD3 & MD4
Dimensions:inches (mm)
|
||
MD3TM Series
|
||
MD4TM Series |
Male and Female End Ports
Either male or female end ports can be attached to threaded inlet and outlet lines. This allows all modules of an FRL
assembly to be removed easily and quickly without having to unthread the end modules. The end ports are attached to the modules with clamps (see at left). End ports can be included in an assembled FRL or ordered separately by the following model numbers:
Extra Port Blocks
An extra port block can be placed between modules to provide two auxiliary 1/4 NPTF ports. Its mounting position can be rotated to obtain the most convenient operating orientation. If only one auxiliary port is to be used, the unused port must be closed with a pipe plug. (The inlet and outlet are not threaded.)
Related Products
-
Okabe B10-0330 3-Shaped Rib
-
Oiles 600 Wear-Resistant Copper Alloy Bearings
-
Kansai Electric Heat Corp 2BLH3-0.88MPA Hot-Air
-
Chiyoda Seiki G-32A/36C Small/Medium/Large flow/Pressure regulator/Governor For General Industrial Gas
-
Chiyoda Seiki General-purpose Pressure Regulator For Cylinders Non-heater Cylinder Pressure Regulator For Ethylene
-
Kakuta No.51BS Straight Line Clamp