Ryoden Shonan UI-27 Ultrasonic Flaw Detector

Made in Japan
Manufacturer: Ryoden Shonan
Model: UI – 27

Feature:

  • B-scan time scroll Recording Functions
  • SD card(accessory 2GB) SDHC32GB max available
  • Free position handle
  • Enhanced operability by both side key operation
    Camera function installed easy screen save
    Abundant interface water protection by cover

Specifications:

Digital ultrasonic
flaw detector UI-27
Digital ultrasonic
flaw detector UI-S9
Digital ultrasonic
flaw detector UI-R1
Digital ultrasonic
flaw detector UI-S7α
Display Screen size 6.5 inch/LED liquid crystal 6.5 inch/LED liquid crystal 6.5 inch/LED liquid crystal 6.5 inch/LED liquid crystal
Effective display area (mm) 132.5×99.4 132.5×99.4 132.5×99.4 132.5×99.4
number of pixels (pixels) 520(W)×460(H) 520(W)×460H) 520(W)×460(H) 520(W)×460(H)
A-scope pixels 360(W)×250(H)
530(W)×421(H) when enlarged
360W)×250(H)
530(W)×421(H) when enlarged
360(W)×250(H)
530(W)×421(H) when enlarged
360(W)×250(H)
530(W)×421(H) when enlarged
External dimensions
(mm)/mass (kg)
256(W)×180(H)×110(D) Approx. 3.5kg excluding projections
(including 1 battery)
243(W) x 160(H) x 96(D) Approx. 2.6kg excluding protrusions
(including 1 battery)
230(W) x 160(H) x 96(D) Approx. 2.6kg excluding protrusions
(including 1 battery)
230(W) x 160(H) x 86(D) approx. 2kg (including 1 battery ) excluding protrusions
Case Reinforced ABS resin (front/rear), aluminum alloy (middle)
(waterproof/dustproof standard: IP66 compliant)
Reinforced ABS resin (front/back), aluminum alloy (upper)
(waterproof/dustproof standard: IPX6Q compliant)
Reinforced ABS resin (front/back), aluminum alloy (upper)
(waterproof/dustproof standard: IPX6Q compliant)
Reinforced ABS resin (front and back)

(Drip-proof type II compliant)

Transmitter performance output impedance 50Ω or less 50Ω or less 50Ω or less 50Ω or less
pulse repetition frequency Interlocking with measuring range Interlocking with measuring range Interlocking with measuring range Interlocking with measuring range
pulse rise time 10ns or less 10ns or less 10ns or less 10ns or less
Transmission waveform square pulse square pulse square pulse square pulse
transmission voltage low/medium/high low/medium/high low/medium/high low/medium/high
dumping 50/300Ω 50/300Ω 50/300Ω 50/300Ω
Receiver performance gain 110dB 0.1dB step 110dB 0.1dB step 110dB 0.1dB step 110dB 0.1dB step
sensitivity 80dB or more 5MHz narrow band 80dB or more 5MHz narrow band 80dB or more 5MHz narrow band 80dB or more 5MHz narrow band
Input impedance in the two-probe method  50Ω±15%, 300Ω±15%
(single-probe method, two-probe method)
50Ω±15%, 300Ω±15%
(single-probe method, two-probe method)
50Ω±15%, 300Ω±15%
(single-probe method, two-probe method)
50Ω±15%, 300Ω±15%
(single-probe method, two-probe method)
Center frequency of receive amplification

0.25/0.5/1/2/3/
4/5/10/15/20/25MHz

0.25/0.5/1/2/3/

4/5/10/15/20/25MHz

1/2/5/10MHz

0.25/0.5/1/2/3/

4/5/10/15/20/25MHz

Amplification linearity Within ±3% Within ±3% Within ±3% Within ±3%
time axis performance range of measurement 1 to 14,556 mm (when converted to longitudinal waves in steel) 5.9 to 14,556 mm (when converted to longitudinal waves in steel) 5.9 to 14,556 mm (when converted to longitudinal waves in steel) 1 to 14,556 mm (when converted to longitudinal waves in steel)
speed of sound 100 to 15,000m/s (Equipped with sound velocity measurement function) 100 to 15,000m/s (Equipped with sound velocity measurement function) 100 to 15,000m/s (Equipped with sound velocity measurement function) 100 to 15,000m/s (Equipped with sound velocity measurement function)
Sweep delay range (pulse position) Full scale to 1,500μs±5% Full scale to 1,500μs±5% Full scale to 1,500μs±5% Full scale to 1,500
μs±5%
Linearity over time Within ±1% Within ±1% Within ±1% Within ±1%

Gate

performance

Gate delay range 0 to full scale on screen 0 to full scale on screen 0 to full scale
on screen
0 to full scale on screen
Gate marker width 0 to full scale on screen 0 to full scale on screen 0 to full scale on screen 0 to full scale on screen
number of gates 4 gate 4 gate 2 gates 4 gate
Standard
accessories
①Battery 1 (UI03-LB78) 1 (UI03-LB78) 1 (UI03-LB78) 1 (UI02-LB75)
②AC adapter 1 piece 1 piece 1 piece 1 piece (UIA345-15)
③Memory 1 SD card 1 USB memory 1 USB memory 1 SD card
④Certificate, warranty card, instruction manual 1 set 1 set 1 set 1 set
Frequency
analysis performance
center frequency 0.25 to 25MHz variable 0.25 to 25MHz variable 0.25 to 25MHz variable 0.25 to 25MHz variable
Display range up to 50MHz up to 50MHz up to 50MHz up to 50MHz
Measurement
/Others
Measurement method Single-probe method/Two-probe method/Transmission method Single-probe method/Two-probe method/Transmission method Single-probe method/Two-probe method Single-probe method/Two-probe method/Transmission method
Waveform selection DC/DC+/DC-/RF DC/DC+/DC-/RF DC/DC+/DC-/RF DC/DC+/DC-/RF
Beam path measurement method Peak/Up/First Echo/Zero Cross/Peak Up Peak/Up/First Echo/Zero Cross Peak/Up/First Echo/Zero Cross Peak/Up/First Echo/Zero Cross
Oblique flaw detection support function Equipped with a refraction angle measurement function that can display 12 DAC lines Equipped with support function for automatic creation of JIS, AWS, ASME DAC Compliant with JSNDI specification compatible devices Can display 6 LMH lines
Equipped with refraction angle measurement function
Number of data saved Approximately 340 cases with standard accessory 512MB depending on memory card capacity
Approximately 1,300 cases with 2GB purchased separately
Depends on memory card capacity Depends on memory card capacity Approx. 340 cases with standard accessory 512MB depending on memory card capacity *
Approx. 1300 cases with separately purchased 2GB*
(* When data and photos are saved at the same time)
Power
supply
AC adapter AC100-240V±10%
50/60Hz±Hz
Power consumption about 20W
AC100~240V±10%
50/60Hz±Hz
AC100~240V±10%
50/60Hz±Hz
AC100~240V±10%
50/60Hz±3Hz
Battery 2 lithium-ion batteries can be stored One lithium-ion battery can be stored One lithium-ion battery can be stored 1 dedicated lithium-ion battery storage
battery life Approximately 8 hours per battery * Approximately 16 hours when using 2 batteries
(May vary depending on usage conditions.)
Approximately 10 hours
(may vary depending on usage conditions)
Approximately 10 hours
(may vary depending on usage conditions)
Approximately 10 hours
(may vary depending on usage conditions)
charging time 80% charge about 2.5 hours
100% charge about 5 hours
80% charge about 2.5 hours
100% charge about 5 hours
80% charge about 2.5 hours
100% charge about 5 hours
80% charge about 2.5 hours
100% charge about 5 hours
Operating environment Ambient temperature 0 to 40°C (during operation)
-20 to 60°C (during storage)
0 to 40°C (during operation)
-20 to 60°C (during storage)
0 to 40°C (during operation)
-20 to 60°C (during storage)
0 to 45°C (during operation)
-20 to 60°C (during storage)
External interface card slot SD memory card USB memory USB memory SD memory card
connector USB (Master/Slave)
LAN/VGA/Encoder (2 axes)
DC input (using dedicated AC adapter)
Earphone microphone (JEITA RC-5240)
DC input (using dedicated AC adapter) DC input (using dedicated AC adapter) USB (master/slave),
DC input (use dedicated adapter) ,
earphone microphone (JEITA RC-5240)
Optional parts (1) Expansion board (PI/O/analog output function) (2) Dedicated external charger (3) Spare battery (dedicated battery) (4) Dedicated storage case ①External charger UICGS7 ②Soft
case (body case)
③Carrying case ④Hand
strap
①External charger UICGS7 ②Soft
case (body case)
③Carrying case ④Hand
strap
①External charger UICGS7 ②Soft
case (body case) ③Carrying
case

Waterproof/dust proof standard

REQUEST QUOTATION

PAYMENT

payment-methods

 

TOOLS & EQUIPMENT

Lifting
Eagle Clamp | Eagle Jack | Elephant | Endo Kogyo
Japan Clamp | Kanetec | Jung | KITO | Katsuyama Kikai
Kondotec | Miki Netsuren | Sanei Seiki | Taiyo

Hand Tools
Bix | Miyakawa | Nakatani Kikai | Ogura | Osakada Tool
Super Tool | TONE | Yutani

Tape
Kamoi | Kikusui | Misuzu | Nirei | Okamoto | Taiho | Teraoka

Measurement
Hasegawa | Kawaki | Kett | KGK | Line Seiki | Nagano Keiki
Niigata Seiki | Obishi Keiki | RSK | Ryoden Shonan | Sanko
Sanwa Supply | Showa Seisakusho | Showa Sokki
SK Sato | Tokyo Keiso | Tokyo Sokushin

Safety Tools
Fujii Denko | Shigematsu | Titan

Welding
Asahi Weldex | Daihen | Koike | Nissan Tanaka

Drilling
Dijet | Kansai Kogu | Nitto Kohki | Okazaki Seiko | Takeda

Chemical
Cemedine | DaitoNippon Grease | Taseto

Other Tools
Hammer Caster | Kitagawa | Matsuda Seiki | Misuz | Sanritsu
Sanyutec | Shizuoka Seiki | Toyo Kensetsu Kohki | Yamamoto
Yamari

PLANT FACILITIES

Facilities
Acokk | Bunkaboeki | Horiuchi | Konan | Murakoshi
Murakoshi Industries | Nesstech | Nihon Flux | Nikkin Flux
NFK | Omega System | Organo | Taiyo Parker | Toyo Mic

Pump
Dynaflo | Ebara | Honda Kiko | KyowaMusashino
Tsurumi

Valve
Astam | Kyowa Iron | Nachi | Nippon Daiya | Sawada
Wasino Kiki | Yoshitake

Electricity
Arkon | Asahi Bagnal | Gentos | Iwasaki | Kokosha | U_RD

CONSTRUCTION

Concrete Work
Daia | EXEN | Japan Life | Mikasa | Okasan Kiko | Taiheiyo

Railway Work
Kyoei | Sanwa Tekki | Teikoku | Toko

Scaffolding
Bullman | Okabe | Rikiman | Tsugaru

High Tension Bolt
Dong Ah | KPF | Nippon Steel Bolten | Nippon Fastener

Bolt & Nut & Washer
Hard Lock | Kishu Fastener | Matsukin | Mori Kozai
Nakaumi | Naniwa | Ogawa | Otani | Sudo | Toneji

STEEL MATERIAL

Steel & other Material
Dongil | JIS Standard | DSR | Sumitomo Wire | Winoa IKK

Pipe
Benkan

Return Top