,

Tosoku RE24 Series Rotary Encoder with Dual Functional Shaft

Product Made in Japan
Manufacturer: Tosoku
Model: RE24 Series

RE24 rotary encoder series contains unique mechanism for its shaft; its rotational outer axis for rotary encoder and the inner axis for push switch.
RE24 is designed for use in various industrial areas: measurement component, medical equipment, industrial machinery, telecommunication device and machine tool.

Features

● Dual inner/outer axes mechanism to help prevent misoperation
● Eco-friendly:
1) Low cost and lesser parts by VA design
2) RoHS compliant
● Thin-line (18.8×25.5×8.9mm) and lightweight (18g)
● Long-lasting without “contact chatter” due to its optical switching function
● Specially designed knob (GG60) available

Specifications

1. Electrical and Mechanical specifications
ItemsRated Value
Number of pulses16PPR, 25PPR
Supply voltage3.3V±10%5V±10%
20mA10mA
Output signalstwo square wave output (A/B), CMOS chip
Output voltageHigh(Supply Voltage - 0.5V) ≦
Low≦ 0.5V
Response frequency200Hz
Rotational TorqueLight: S4±1mN・m
Standard: C6±2mN・m
Medium: M10.5±3.5mN・m
High: H16±5mN・m
Push switchRating of contact≦ DC12V 0.1 ~ 10mA
Travel of switch0.2±0.1mm
Operational ForceS3.2±1N
H4.0±1N
M5.0±1N
Weight18g
2. Reliability and Environmental specifications
ItemsRated Value
Durability of operating areaThrust directionPush100N
Pull50N
Radial1N・m
Rotational durabilityLight: S1 million strokes (No load)
Standard: C
Medium: M
High: H100 thousand strokes (No load)
Screw TorqueNot more than 1N・m
Heat resistance of solderSolder bit temp.: MAX 350℃Within 3 seconds for each terminal
Operating temperature0℃  ~ +55℃
32F ~ 131F
Storage temperature- 40℃ ~ +85℃
- 40F ~ 185F

Note: In case Rotational Torque M or H, Operational Torque should be either M or H.

Output Waveform

1) Turning the shaft clockwise will generate the signal A when the signal B outputs a low voltage (0);
2) Rotating the shaft counter-clockwise will generate the signal A when the signal B outputs a high voltage(1);
3) Detent positions are where both signals A and B are low (0).

Part Number Designation

Dimensions (mm)

Circuitry

Warranty

● 1 year from the date of shipment.

Precautions

WiringUse buffering amplifier when extending lead wire over 30cm.
SolderingDo not put a load on the terminal area during and immediately after soldering.
OperationDo not use flow/reflow soldering machines.
PowerUse under specified power voltage and connect properly.
WaterproofingDo not fasten tighter with the torque of more than 1.5N・m.

REQUEST QUOTATION

PAYMENT

payment-methods

Return Top