Chemical, Isolite Insulating, Japan
Isolite Insulating Isolite Mortars

Manufacturer: Isolite Insulating
ISOLITE Mortars
Features
Fire resistance, such as minimum shrinkage/expansion during drying or sintering
ISOLITE supplies various types of Mortars to suit your needs in terms of material, degree of density and rate of porosity. It has suitable fire resistance, such as minimum shrinkage/expansion during drying or sintering, and it contributes to improving the efficiency of construction.
Quality
Finenessμm | Tested Brick | Adhesion Time (Min) | Bending Strength after bonding | |||
MPa(Kgf/cm2) | ||||||
105℃ | 1000℃ | |||||
ASW(Wet-Type) | N-10 | 1000 All through | B1 | 1〜3 | 0.39(4) | 0.69(7)※1 |
N-12 | 〃 | B4 | 〃 | 0.39(4) | 0.69(7) | |
F-14 | 〃 | B5 | 〃 | 0.69(7) | 1.1(11) | |
S-150 | 〃 | C1 | 〃 | 1.8(18) | 1.8(18) | |
ASD(Dry-Type) | N-10 | 〃 | B1 | 1〜3 | 0.59(6) | 0.98(10)※1 |
N-12 | 〃 | B4 | 〃 | 0.69(7) | 0.78(8) | |
F-14 | 〃 | B5 | 〃 | 0.79(8) | 0.89(9) | |
F-30 | 〃 | LAP-165 | 〃 | 1.2(12) | 1.4(14) | |
SAS-W(Wet-Type) | 〃 | LBK-23 | 〃 | 0.49(5) | 0.69(7) | |
SAS-D(Dry-Type) | 〃 | LBK-23 | 〃 | 0.49(5) | 0.69(7) | |
HAS-W(Wet-Type) | 〃 | LBK-28 | 〃 | 0.98(10) | 1.1(11) | |
HAS-D(Dry-Type) | 〃 | LBK-28 | 〃 | 0.79(8) | 1.2(12) | |
MAS-W(Wet-Type) | 〃 | ISO-COR | 〃 | 2.5(26) | 3.8(39) | |
MAS-D(Dry-Type) | 〃 | ISO-COR | 〃 | 2.1(21) | 3.4(35) | |
MAS-DS(Dry-Type) | 〃 | BAL-99 | 〃 | 1.1(11) | 1.4(14) | |
Board Mortar(Dry-Type) | – | Silica Board | 〃 | 0.39(4) | 0.20(2)※2 |
※1 Tested Brick is Isolite B2
※2 Tested at 500℃ firing
※MAS-DS is heat set mortar, Others are air set mortar
※All packages contain 25kg/pack, Wet-Type by CAN, Dry-Type and Board Mortar by Paper bag.
※Data are average of tests conducted under standard and are subject to variation. Result should not be used for specification purposes.
Tested Brick | Mortar(2mm joint)require q’ty | |||
STD Brick (kg/1,000pc) | Area (kg/1㎡) | |||
ASW(Wet-Type) | N-10 | A1、A2、B1、B2 | 260〜300 | 5.4〜6.2 |
N-12 | A3、A4、B4 | 260〜300 | 5.4〜6.2 | |
F-14 | A5、A6、B5、B6、C1、C2 | 250〜290 | 5.1〜6.0 | |
F-15 | A7、C3 | 250〜290 | 5.1〜6.0 | |
S-150 | C1、C2、C3 | 150〜200 | 3.1〜4.1 | |
ASD(Dry-Type) | N-10 | A1、A2、B1、B2 | 180〜220 | 3.7〜4.5 |
N-12 | A3、A4、B4 | 180〜220 | 3.7〜4.5 | |
F-14 | A5、A6、B5、B6、C1、C2 | 170〜210 | 3.5〜4.3 | |
F-30 | LAP-165 | 160〜200 | 3.3〜4.1 | |
SAS-W(Wet-Type) | LBK-20、LBK-23 | 230〜270 | 4.7〜5.6 | |
SAS-D(Dry-Type) | LBK-20、LBK-23 | 150〜200 | 3.1〜4.1 | |
HAS-W(Wet-Type) | LBK-26、LBK-28、LBK-30、LBK-3000、LHB | 250〜290 | 5.1〜6.0 | |
HAS-D(Dry-Type) | A7、C3、LBK-26、LBK-28、LBK-30、LBK-3000、LHB | 160〜200 | 3.3〜4.1 | |
MAS-W(Wet-Type) | ISO-COR | 250〜290 | 5.1〜6.0 | |
MAS-D(Dry-Type) | ISO-COR | 160〜200 | 3.3〜4.1 | |
MAS-DS(Dry-Type) | BAL-99、BAL-99M | 230〜270 | 4.7〜5.6 | |
Board Mortar(Dry-Type) | Silica Board、Super Board | 530〜570※1 | 5.8〜6.2 |
Related Products
-
Watanabe WSC-80HF Edgewise Type Non-contact Meter Relay
-
Nakatani Kikai NC1S Chipping Hammer (Spring Type, Clutch Type)
-
Eagle Jack (Konno Corporation) ED-200C Hydraulic Bottle Jack
-
Kanetec KCT-Series Water Cooled Electromagnetic Chuck
-
Kansai Kogu D130006100 Saver Saw Jab Saw
-
Kansai Kogu B040C (B040C41015, B040C41030, B040C41040, B040C41050, B040C41230, B040C41240, B040041250, B040041530, B040C41540, B040C41550) For Engine Machines, Asphalt Only NA