Japan, Kurimoto
Kurimoto KID Indirect Heating Dryer

Product Made in Japan
Manufacturer: KURIMOTO
The KID Dryer is an agitation type indirect heating dryer. By introducing gas at a low velocity from the gas dispersion plate, the KID Dryer reduces the power required to agitate the powder and particle layer by 1/3 to 1/10 and facilitates the maintenance work.
Features
The KID Dryer artfully associates the air blasting effect with the agitation effect, minimizing the air quantity required, i.e., to 1/5 to 1/20 of that for fluidized bed.
Larger clearance between the walls and the heating surface enables weight reduction of the agitation mechanism.
Nearly 100-percent hold-up is available to make the equipment compact in size.
The KID Dryer has removed the weak points of the non-aeration, agitation type heating dryer by introducing features like the above
Construction
Typical Flow Sheet
Related Products
-
Hammer Caster 111A Adjuster
-
V-KF-S Vacuum Fitting (KF Standard Flange)
-
Chiyoda Seiki GS-3000PL Series Large Flow/pilot Type Pressure Regulator (Primary pressure: 3.0 MPa or less/adjustment pressure 0.2 to 1.0 MPa, standard flow rate: 1250 m3/h・Air)
-
KONAN CP6810 Pneumatic Cylinder Lightweight Compact Oilless Enclosed Type (Standard Type)
-
Daiwa Kenko DPC-DN / DP-4L Manual Pump (Double-acting Type)
-
Kurimoto SD-10 Water Level Controlled Float Valves