Japan, Takeda Machinery
Takeda Machinery CS-75/100/150AII Carbide Circular Sawing Machine with Sizing Device
Product made in Japan
Manufacturer: Takeda Machinery
Model: CS-75/100/150AII
TAKEDA’s Comprehensive Technologies for Free Cutting of Steel Bars and Hollow Sections!
FEATURES
High Rigidity and High Stability
The rigid machine frame sustains the high-speed rotation of the circular saw. We, at TAKEDA, design machine elements based on our past experience for ensuring stability in high-accuracy cutting. In addition, the cutting speed is about 20% higher than that of our conventional machines, which helps to increase productivity.
Automatic Sizing Device
The automatic sizing device equipped with a gripper feeds and positions the workpiece accurately. The floating function is added to eliminate scratches that might occur during feeding. The gripper detects the end of each bar with a photoelectric switch, holds the workpiece securely, and feeds it with accuracy.
Reduced Backlash
The backlash in the gearhead greatly affects machine vibrations, saw blade life, and cut surface roughness. TAKEDA’s original gear unit is free from these problems and enables stable cutting.
SPECIFICATIONS
Capacity and Workpiece Size (CS-75AII)
| Round bars (mm) | 1-piece cut | φ10 to φ76.3 |
|---|---|---|
| 2-piece cut | φ10 to φ35 | |
| Square bars (mm) | 1-piece cut | □10 to □60 |
| 2-piece cut | □10 to □30 | |
| Workpiece length (mm) | Maximum | 6,000 |
| Minimum | 1,000 | |
| Short cutting | Product length + 300 | |
| Cutting length (mm) | Trim cut | 10 or more |
| Remnant | 25 or more | |
| Product | 10 or more |
Capacity and Workpiece Size (CS-100AII)
| Round bars (mm) | 1-piece cut | φ25 to φ101.6 |
|---|---|---|
| 2-piece cut | φ25 to φ45 | |
| Square bars (mm) | 1-piece cut | □25 to □75 |
| 2-piece cut | □25 to □37.5 | |
| Workpiece length (mm) | Maximum | 6,000 |
| Minimum | 1,000 | |
| Short cutting | Product length + 300 | |
| Cutting length (mm) | Trim cut | 10 or more |
| Remnant | 30 or more | |
| Product | 10 or more |
Capacity and Workpiece Size (CS-150AII)
| Round bars (mm) | 1-piece cut | φ75 to φ152.4 |
|---|---|---|
| 2-piece cut | ||
| Square bars (mm) | 1-piece cut | □75 to □100 |
| 2-piece cut | ||
| Workpiece length (mm) | Maximum | 6,000 |
| Minimum | 1,000 | |
| Short cutting | Product length + 350 | |
| Cutting length (mm) | Trim cut | 20 or more |
| Remnant | 45 or more | |
| Product | 20 or more |
Related Products
-
Urakawa ZTN32×45 ZTN Series JEC and JEM certified products
-
Yamato Kizai FY-RF Sight Glass
-
Chiyoda Seiki BHN-4 Second-stage Pressure Reducing Pressure Regulator For Equipment And Line/panel Mount (Primary pressure: 15.0 MPa or less / Adjustment pressure: 0.1 to 0.6 MPa, Maximum flow rate: 100 L/min-Air)
-
Eisen EL Series Pin Gauge
-
KETT ELECTRIC LABORATORY PM-450 Grain and Coffee Moisture Tester
-
Kunimoto 0001050&0001060 KS Contact Plate for 50/60 square pipe (L Type)
