Speed Construction – Safety Strength – Abundant variations

Features

■ Excellent tip shape with biting when screwed in
■ Special screws that demonstrate excellent screwability & high strength
■ Rust-resistant “Suspend SGJ treatment”

Specification

Features

The product is hard to settle, flexible and has good followability.

● Has excellent water-stopping property.
● Maintains water stoppage between 20% and 70% compression rate, and can be used in a wide range of areas with large variable gaps in one size.
● Absorbs complicated compression and impact on the sealing material during floorboard installation work, and maintains its sealing performance.

Specifications

● Standard length 10m up to a thickness of 30mm, 2m for a thickness of 35mm or more (special specification: 3m).
● Double-sided tape is attached to either width or height.
● Supports with slip tape on the top surface for the sole sponge.
● There is a two-layer type (NFPE) that supports high thickness and is easy to install.

FK Type

FM Type

FD Type

NFPE (2 layers) Type

For splicing board (splice)

Compressive stress

Standards

Examples

Synthetic floorboard seal part:

Precast PC floorboard seal part:

Applications

● Steel expansion and contraction of bridges water-stop
● Bridge wall height blocking to the joint water
● The median strip of the bridge to the joint water stop
● Building and multistory parking lot on deck concrete seam stop
● Waterproofing of the structure

Features

● U-shaped, the stress generated at the time of expansion and contraction can be alleviated. More over, retention is also possible.
● Abundant in number of types, it can cope with various installation gaps and expansion / contraction amount.
● The width of the mounting part is compact, it is easy to apply to various gapped dimensions. In addition, leakage prevention material is installed in the mounting part, it is possible to stop water completely.
● By removing the mounting nut, it can easily be replaced.
● In addition to perpendicular direction, it can correspond to movement in diagonal direction.
● The reinforcement type embeds a high strength breaker inside, so it has outstanding durability.
● Even in cold climates, there are materials with good trackability.
● The standard color is black, but color processing can be done.

Installation reference example

● Steel expansion and contraction unit <General section>
● Steel expansion and contraction device <End part>
In case
● Wall height column part
● Vertical joint	● Median strip	● Slab concrete seam

Geometry

Standard type				Reinforcement type
				In case
type	Allowable expansion / contraction amount (mm)	Bellows lid	Dimension table (mm)
			A	B	C	D	E	R
YN – 80	– 40 to + 40	S	120	40	40	30	17	20
YN-100	– 50 to + 50	S	130	50	40	30	17	25
YN-160	– 80 to + 80	M	160	80	40	50	17	40
YN-200	-100 to +100	M	200	100	50	50	22	50
YN-300	-150 to + 150	L	250	150	50	50	22	75
YN-400	-200 to + 200	L	320	200	60	100	27	100
YN-500	-250 to +250	L	370	250	60	100	27	125
YN-600	-300 to + 300	LL	560	440	60	50	27	220

Speed Construction – High Strength – Smart Function

Features

■ Quickly stand up bolts to various building materials
■ Can be constructed directly without pilot holes in ALC, plywood, wood
■ Can also be used for extruded cement board / asphalt (required pilot hole)
■ Strong tensile retention with large shaft diameter Exercise power
■ Special screw design that demonstrates excellent screwing ability and holding power

Specification

Features

■ Bring out great strength on ALC

■ Screw fixing type in which the ALC end is difficult to crack

■ Impact from drilling to fixing . Fixed with one screwdriver. ALC can drill quickly and cleanly with woodworking drill + Invera outside dryer.

■ Impact High Speed Turbo Booster New Appearance . Construction speed up

■ Drill diameter is small (Example: M10 drill diameter 14.0 mm)

Specification

Features

■ Strong head to hold firmly.
■ Fast fixation with impact driver
■ No Plug
■ High strength
■ Excellent square pit (included)

Specification

Lightweight – Speed Construction

Features

● 50% superb view from conventional anchor. It is easier to carry
● The lower large diameter only 6.4 mm. Construction speed up
● Depth of embedding is constant. Welding does not sink into the hole even in a deep hole (see figure)
● Temporarily upwards can be inserted. Anchors can be plugged in and put together in batches.

Specification

Speed construction – security strength – smart function

FEATURES

● Speedy & secure operation with impact driver!

● End part · Finish material is not easily broken

● Height can be adjusted even after construction (uneven adjustment function)

● Easy corner and ceiling construction

● Anchor removable

Specification

Fields: Transportation, Housing & Construction, Consumer Products, Industrial Machinery

Functions: Shock, Sealing, Comfort, Others

Materials: Polyurethane

Technologies: Polyurethane foaming technology

About NFE (New Foam Edge)

HPF Oiles Hiplast N Flange Bushings

Features

●Serviceable without the need for lubrication. Features superior load resistance and wear resistance. As thin as 0.5 mm,allowing for a compact design.
●Features superior chemical and heat resistance.

●Special mounting method unique to the Hiplast series allows zero clearance. (Backlash prevention)
●Metallic mesh offers lower thermal expansion coefficient and higher thermal conductivity than plastic bearings.
●Press-formed and available in intended forms.
●The conductive grade Hiplast E is available when electric conductivity is required.

TMDB OILES Toughmet D Bushings
TMDP OILES Toughmet D Plates

Features

●Superior durability and stable low coefficient of friction where lubrication is present.
●Able to handle reciprocating, oscillating, and intermittent motion where oil film is difficult to be formed.
●Thin walled configuration for compact design.
●Dramatically reduces lubrication intervals.
●Possesses high load carrying capacity, wear resistance, and seize resistance.
●Electric conductive
●Available in various standard and custom sizes.

TMB Oiles Toughmet Bushings

Feature

●Has superior load resistance and heat resistance. Also conductive.
●Demonstrates superior performance even in reciprocating, oscillating, and intermittent operations.
●Demonstrates many superior performances by the action of oil-retaining power of the sintered copper alloy layer and solid lubricant if lubricating oil is used together.
●Thin bearing allows compact design.
●Electrically conductive.
●The standard products are available in various sizes.

Feature

●Serviceable without the need for lubrication. Features superior dimensional stability, mechanical strength, and thermal conductivity with a thin, lightweight, and compact design. (Available from Thickness 0.5 mm）
●Features low coefficient of friction and superior wear resistance.
●Electrically conductive

TCB Oiles Techmet B Bushings Made-to-order

Features

●Serviceable without the need for lubrication. Features superior dimensional stability, mechanical strength, and thermal conductivity with a thin, lightweight, and compact design.
●Demonstrates stable low coefficient of friction and superior wear resistance under high-speed conditions.
●The plastic layers have machining allowance, allowing high dimensional accuracy when the inner diameter is machined.
●The standard products in various sizes are available on order.

LFG Oiles LF Guides

Feature

●Incorporates Oiles bearings for self-lubricating operations.
●Features low coefficient of friction and superior wear resistance.
●Easily mountable. Compatible with ball bearing types.
●Low prices with simple structures.

LFB Oiles Drymet LF Bushings (I.D. φ3～φ28)
LFB Oiles Drymet LF Bushings (I.D. φ30～φ160)
LFF Oiles Drymet LF Flange Bushings
LFW Oiles Drymet LF Washers
LFCF Oiles Drymet LF (t0.5)
LFP Oiles Drymet LF Plates

Feature

●Serviceable without the need for lubrication. Thin and lightweight for compact design.
●Demonstrate low coefficient of friction and superior load performances in high-load, low-speed conditions.
●Usable at the high PV values even in the middle- and high-speed zones when lubricated.
●Usable in wide temperature ranges from low to high temperatures. Has superior chemical resistance.
●Features superior dimensional stability, mechanical strength, and thermal conductivity.
●The standard products and plate materials are available in various sizes.

70B Oiles Drymet ST Bushings (I.D. φ5～φ30)
70B Oiles Drymet ST Bushings (I.D. φ31～φ160)
70W Oiles Drymet ST Washers
70P Oiles Drymet ST Plates

Feature

●Serviceable without the need for lubrication and demonstrates low coefficient of friction and superior load performance.
●Demonstrates superior wear resistance in applications where oil film is seldom produced such as reciprocating motions, oscillation, frequent starts and stops, etc.
●Thin bearing allows compact design.
●Superior dimensional stability, mechanical strength, and thermal conductivity.
●The standard products and plate material of various sizes are available.

36M Oiles 600 Bar Stock & 36S Oiles 600 Bushing Material

Feature

●Demonstrates wear resistance and seizure resistance in lubricated conditions.
●Reduces the frequency of lubrication.
●Demonstrates especially high running-in characteristics.
●Materials for machining are available.

30B Oiles 300 Bushings (Thin wall)
30B Oiles 300 Bushings
30F Oiles 300 Flange Bushings
30W Oiles 300 Washers
30M Oiles 300 Bar Stock
30S Oiles 300 Bushing Material

Feature

●Reduces much less lubrication than copper alloy bearings.
●Maintains oil film well and features superior wear resistance and seizure
resistance.
●Places no restrictions on sliding surface shapes or motion forms.
●Available in larger dimensions than oil-impregnated sintered bearings.
●Standard products and materials for machining are available in various sizes.

55M Oiles Cermet G Bar Stock
55S Oiles Cermet G Bushing Material

Feature

●Serviceable without the need for lubrication.
●Features superior heat resistance.
●Demonstrates superior performance in hot and hard-to-lubricate positions.
●Materials for machining are available.

54B Oiles Cermet M Bushings
54F Oiles Cermet M Flange Bushings
54M Oiles Cermet M Bar Stock
54S Oiles Cermet M Bushing Material

Feature

●Serviceable without the need for lubrication. Demonstrates higher performance when lubricated.
●Demonstrates superior wear resistance in applications where oil film is seldom produced such as reciprocating motions, oscillation, frequent starts, and stops, etc.
●Standard products and materials for machining are available in various sizes.

Feature

●Serviceable without the need for lubrication. Demonstrates higher performance when greased.
●Distributed solid lubricant allows motions in any direction.
●Features low coefficient of friction and quite superior wear resistance.
●Lower prices than bearings with copper alloy bases.

The Oiles Shoe Units are unit bearings developed as shoe units of movable platens for injection molding machines.

PAC Oiles Shoe Units

Features

●Usable as not only movable platens but also various types of shims and spacers.
●The sliding material is made of Oiles 2000 featuring superior wear resistance.
●The slide seals are attached to the slide plates, eliminating troublesome
adjustment of the slide seals after height adjustment.
●The height is adjustable in ±0.25 to ±0.7 mm range.

CBB Oiles 2000 Bushings
CLB Oiles 2000 Bushings (High Precision type)
CLF Oiles 2000 Flange Bushings (High Precision type)
CWT Oiles 2000 Wear Plates 5mm Thickness
CWX Oiles 2000 Wear Plates 10mm Thickness
CWXT Oiles 2000 Wear Plates 10mm Thickness (2 hole type)
CWA Oiles 2000 Wear Plates 10mm Thickness
CWP Oiles 2000 Wear Plates
CWPT Oiles 2000 Wear Plates 20mm Thickness (2 hole type)
CWI Oiles 2000 Plates for Additional Machining

Feature

●Dispersed solid lubricant allows motions in any direction and offers superior
performance for minute movements.
●Serviceable without the need for lubrication.
●Features superior load resistance, speed characteristics, and wear resistance.
●Standard products and plates for additional machining are available in various sizes.

Test Data

SPS Oiles 500SP1 SL1 Spherical Bearings

Feature

●Conforms to the ISO Standard E type bearings. Compatible with them dimensionally. High precision.
●The inner surface of the inner race is subject to sliding. The outer surface of the inner race bears self-aligning.
●Applicable to higher loads than other self-lubricating spherical bearings.
●Applicable to large oscillating angles in circumferential oscillating motion.
●Serviceable without the need for lubrication. Features quite long service life.

FGB Oiles 500F SL1 Guide Bushings

FWPT Oiles 500F SL1 Wear Plates

FWP Oiles 500F SL1 Wear Plates

Feature

●Serviceable without the need for lubrication.
●Demonstrates high performance under low- and middle-load, low-speed operations.
●Demonstrates superior wear resistance in applications where oil film is seldom
produced such as reciprocating motions, oscillation, frequent starts and stops, etc.
●Lower prices than the bearings with copper alloy bases.
●Standard products are available in various sizes.

BCB Oiles 500B1 SL2 Bushings

Feature

●Serviceable without the need for lubrication.
●Demonstrates high performance under middle-load and middle-speed
operations.
●Usable at high temperatures.
●Has superior chemical and corrosion resistance.
●Standard products are available in various sizes.

Features

●Usable in seawater.
●Has superior heat resistance.
●Not brittle at low temperatures and may be used at very low temperatures.

HPB Oiles 500HP SL1 Bushings

Features

●Bears higher loads than the 500SP5.
●Demonstrates superior wear resistance under high-load and low-speed
applications.