This is a constant-temperature oil bath capable of circulating liquid media at a maximum temperature of 150°C externally.
A powerful stirring motor allows it to handle even highly viscous oils (MAX 100 mm²/S).
Equipped with a high-head circulation pump capable of transporting highly viscous liquids, it can deliver the liquid to an external tank or jacket for heating and constant temperature maintenance.

• High temperature stability (±0.1℃) due to PID control.
• Equipped with various safety features such as overheat protection, dry-boil protection, and liquid level drop alarm.
  Custom modifications for a Max 180℃ type are also available.
• Timer operation is selectable.
  Selectable auto-stop/auto-start timer (maximum 99 hours 59 minutes)
  *Excluding circulation pump

External dimensions	W640×D380×H525mm
Internal dimensions of the tank	W440×D300×H300mm
Capacity (L)	36
Temperature range (°C)	Room temperature +10℃ 150℃
temperature distribution	±0.2℃ (at 120℃ using silicone oil)
temperature stability	±0.1℃ ( using Element14PDMS100J silicone oil at 120℃ )
temperature control	Digital temperature indicator and controller, PID control system
timer	1 minute to 99 hours 59 minutes: Auto start timer or auto stop timer
heater	Sheath type 2kW
Agitator	Vertical propeller agitator type, 22W motor
Circulation pump	Stainless steel 90W condenser motor Maximum flow rate 20 L/min, maximum head 12 m (at 100 mm²/s silicone oil, 100°C) Maximum flow rate 15 L/min, maximum head 10 m (at 100 mm²/s silicone oil, 25°C)
Circulation IN-OUT	Rp 3/8
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, heater disconnection, temperature sensor malfunction, low liquid level, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304) Pump wetted parts: Stainless steel (SUS-304), Bearings: Ceramic Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel lid
power supply	AC100V 21A 50/60Hz, 3m cord (no plug), Power supply capacity 30A or more.
others	Drain opening outer diameter Φ12mm
weight	36kg

Illustrations

• Renewed constant temperature water bath with digital display up to 100℃.
  High temperature stability of ±0.1℃ with PID control using a digital temperature controller.
• Equipped with high-power heating capabilities with heater capacity matched to the capacity of each aquarium.
• Added a safety device to prevent overheating of the tank.
• The hot water in the tank can be circulated using an optional circulation pump.

Usage example

This product can be used for various water and heat resistance tests (of resins, paints, etc.), wood adhesion strength tests including boiling and peeling tests, and repeated testing.

Specification

External dimensions	W650×D500×H590mm
Internal dimensions of the tank	W600 x D450 x H400 (Effective H350) mm
Capacity (L)	100
Temperature range (°C)	Room temperature +5℃ 100℃ *This temperature range is for use with the lid. However, the lid is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 4kW
Agitator	Vertical propeller agitator type 90W motor
safety equipment	Leakage circuit breaker, tank temperature overheating prevention
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel height-adjustable shelves.
power supply	AC200V Single Phase 21A 50/60Hz Plugless Cord 3m Power Supply Capacity 30A or more
others	Drain port outer diameter Φ16mm
weight	Approximately 45 kg

Illustrations

The TRL-11L’s programmable control specifications allow for a wider range of applications.

• Easy Setup Operation: Program operation can be easily performed by simply setting the items displayed on the message display unit.
• You can choose between constant-value operation and programmed operation. Since you can choose the operation method, constant-value operation is of course possible.

External dimensions	W425×D500×H(Aquarium 510 + Control Unit 240) mm
Internal dimensions of the tank	W300×D400×H200mm
Effective dimensions inside the tank	W260×D280×H200mm
Capacity (L)	twenty two
Temperature range (°C)	-20℃ 80℃
temperature stability	Within ±0.05℃ (inside the tank when the circulation pump is not in use)
temperature control	Digital Program Control PID System Programmable Operation/Constant Operation Switchable Number of Memory Patterns: 1 pattern Number of Memory Steps: Maximum 20 steps/1 pattern Setting Time Range: 99 hours 59 minutes/1 step Selection of Cooling Operation (Refrigeration Unit ON/OFF) for Each Step
heater	Sheath type 1kW
Refrigeration unit	Air-cooled 250W HFC-134a
cooling capacity	530W (455kcal/h)
cooling capacity environment	Water temperature 20℃ 50Hz *When circulation pump is not used
Circulation pump	20W motor Agitation section: Propeller agitation  pump section: Maximum head 2m, Maximum flow rate 10L/min, Maximum discharge pressure 0.02Mpa
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp3/8) movable
safety equipment	Earth leakage circuit breaker, self-diagnostic function (HC: overheating prevention, LC: low temperature prevention, low water level detection, refrigerator protection circuit, temperature sensor malfunction, refrigerator pressure malfunction, incorrect setting prevention)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel shelves, one stainless steel lid.
power supply	AC100V 15A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ10mm
weight	Approximately 46 kg

llustrations

With its programmable control specifications, it can be used for a wider range of applications.

• Easy Setup Operation: Program operation can be easily performed by simply setting the items displayed on the message display unit.
• You can choose between constant-value operation and programmed operation. Since you can choose the operation method, constant-value operation is of course possible.

External dimensions	W405×D495×H(Aquarium 460 + Control Unit 240) mm
Internal dimensions of the tank	W300×D400×H200mm
Effective dimensions inside the tank	W300×D300×H200mm Observation window W258×H143
Capacity (L)	twenty two
Temperature range (°C)	0℃ 80℃
temperature stability	Within ±0.05℃ (inside the tank when the circulation pump is not in use)
temperature control	Digital Program Control PID System Programmable Operation/Constant Operation Switchable Number of Memory Patterns: 1 pattern Number of Memory Steps: Maximum 20 steps/1 pattern Setting Time Range: 99 hours 59 minutes/1 step Selection of Cooling Operation (Refrigeration Unit ON/OFF) for Each Step
heater	Sheath type 1kW
Refrigeration unit	Air-cooled 130W HFO-1234yf
cooling capacity	209W (approx. 180kcal/h)
cooling capacity environment	Water temperature 20℃ 50Hz *When circulation pump is not used
Circulation pump	20W motor Agitation section: Propeller agitation  pump section: Maximum head 2m, Maximum flow rate 10L/min, Maximum discharge pressure 0.02Mpa
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp3/8) movable
safety equipment	Earth leakage circuit breaker, self-diagnostic function (HC: overheating prevention, LC: low temperature prevention, low water level detection, refrigerator protection circuit, temperature sensor malfunction, refrigerator pressure malfunction, incorrect setting prevention)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel shelves, one stainless steel lid.
power supply	AC100V 14A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ10mm
weight	Approximately 38kg

llustrations

The TRL-11L, with a temperature range of -20 to 80°C, features a circulating fluid delivery function. Its specially designed temperature controller offers high temperature stability and functionality, making it easy and reliable to use.
Furthermore, the circulation IN-OUT ports are movable, allowing you to change the direction of IN-OUT to suit your installation environment.
The TRL-11, equipped with an observation window, is also available.

External dimensions	W425×D500×H(Aquarium 510 + Control Unit 240) mm
Internal dimensions of the tank	W300×D400×H200mm
Effective dimensions inside the tank	W260×D280×H200mm
Capacity (L)	twenty two
Temperature range (°C)	-20℃ 80℃
temperature stability	Within ±0.05℃ (inside the tank when the circulation pump is not in use)
temperature control	Digital temperature indicator and controller, PID control system
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Sheath type 1kW
Refrigeration unit	Air-cooled 250W HFC-134a
cooling capacity	530W (455kcal/h)
cooling capacity environment	Water temperature 20℃ 50Hz *When circulation pump is not used
Circulation pump	20W motor Agitation section: Propeller agitation  pump section: Maximum head 2m, Maximum flow rate 10L/min, Maximum discharge pressure 0.02Mpa
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp3/8) movable
safety equipment	Earth leakage circuit breaker, self-diagnostic function (HC: overheating prevention, LC: low temperature prevention, low water level detection, refrigerator protection circuit, temperature sensor malfunction, refrigerator pressure malfunction, incorrect setting prevention)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel shelves, one stainless steel lid.
power supply	AC100V 15A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ10mm
weight	Approximately 46 kg

llustrations

The TRL-11, with its observation window, is highly versatile, and its specially designed temperature controller offers high temperature stability and functionality, making it easy and reliable to use.
Furthermore, the circulation IN-OUT is movable, allowing you to change the direction of IN-OUT to suit your installation environment.
A TRL-11L with increased cooling capacity and a temperature range of -20 to 80°C is also available.

External dimensions	W405×D495×H(Aquarium 460 + Control Unit 240) mm
Internal dimensions of the tank	W300×D400×H200mm
Effective dimensions inside the tank	W300×D300×H200mm Observation window W258×H143mm
Capacity (L)	twenty two
Temperature range (°C)	0℃ 80℃
temperature stability	Within ±0.05℃ (inside the tank when the circulation pump is not in use)
temperature control	Digital temperature indicator and controller, PID control system
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Sheath type 1kW
Refrigeration unit	Air-cooled 130W HFO-1234yf
cooling capacity	209W (approx. 180kcal/h)
cooling capacity environment	Water temperature 20℃ 50Hz *When circulation pump is not used
Circulation pump	20W motor Agitation section: Propeller agitation  pump section: Maximum head 2m, Maximum flow rate 10L/min, Maximum discharge pressure 0.02Mpa
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp3/8) movable
safety equipment	Earth leakage circuit breaker, self-diagnostic function (HC: overheating prevention, LC: low temperature prevention, low water level detection, refrigerator protection circuit, temperature sensor malfunction, refrigerator pressure malfunction, incorrect setting prevention)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel shelves, one stainless steel lid.
power supply	AC100V 14A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ10mm
weight	Approximately 38kg

llustrations

In addition to high stability with a temperature stability of ±0.05℃ through PID control, it is equipped with various safety features.
By arranging the refrigerator horizontally, the overall height is kept low, and the design makes it easy to load and unload samples on a tabletop.

External dimensions	W750 x D510 x H (Aquarium 340 + Control Unit 140) mm
Internal dimensions of the tank	W200×D280×H200mm
Effective dimensions inside the tank	W200×D200×H200mm
Capacity (L)	10
Temperature range (°C)	-40℃ room temperature
temperature stability	±0.05℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 750W
Refrigeration unit	Air-cooled 400W HFC-404A
cooling capacity	209W (180kcal/h)
cooling capacity environment	Liquid temperature -20℃ 50Hz
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, overheat prevention alarm for tank temperature, heater dry-boil prevention device, refrigerator protection circuit
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel shelves, one PVC lid.
power supply	AC100V 15A 50/60Hz, 2m cord with plug
others	Drain opening outer diameter Φ8mm
weight	Approximately 68 kg

llustrations

• The fluid can be easily supplied to and circulated through external heat exchangers, jackets, and other sealed systems up to 40°C.
• In addition, the refrigerator provides excellent low-temperature performance, so this compact unit can cool down to -40°C. Moreover, it offers a high cooling capacity of 220 W at -20°C, allowing users to cool samples rapidly to low temperatures.
• Furthermore, the compact design reduces the required installation space.

External dimensions	W320 x D510 x H (610mm for the tank + 115mm for the stirring motor) mm
Internal dimensions of the tank	W200×D200×H200mm
Capacity (L)	7
Temperature range (°C)	-40℃ room temperature
temperature stability	±1.5℃
temperature control	Digital temperature indication controller ON-OFF control method
Refrigeration unit	Air-cooled 400W HFC-404A
cooling capacity	220W (189kcal/h)
cooling capacity environment	Liquid temperature -20℃ 50Hz
Circulation pump	40W motor Agitation section: Propeller type agitation Pump section: Maximum head 2m, Maximum flow rate 10L/min, Maximum discharge pressure 0.02Mpa
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp 3/8)
safety equipment	Power breaker, refrigerator protection circuit
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One Bakelite lid
power supply	AC100V 7A 50/60Hz, 2m cord with plug
others	Drain opening outer diameter Φ9mm
weight	Approximately 45 kg

llustrations

   

• The specially designed temperature controller allows users to set and display the temperature in 0.01°C increments. In addition, the twin jet stirring system keeps the tank temperature uniform, so the unit provides a stableilable: the standard TRL-101FZ and the TRL-101FEZ with enhanced cooling.
• Furthermore, users can sel temperature environment even when users use ethylene glycol-based brine as the media liquid.
• Moreover, two models are avaect either auto-start or auto-stop timer operation, with a maximum setting of 99 hours and 59 minutes.
• Additionally, the heat-resistant glass helps prevent condensation because it operates together with the refrigeration unit.

External dimensions	W650×D500×H400mm
Internal dimensions of the tank	W300×D400×H300mm
Effective dimensions inside the tank	W260×D365×H245mm Observation window W250×H143mm
Capacity (L)	32
Temperature range (°C)	-10℃ 60℃
temperature stability	±0.05℃ (at brine temperature of -10℃)
temperature control	Digital temperature indicator and controller, PID control system, 1/100°C temperature setting and display.
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Cartridge heater 1kW (500W x 2)
Refrigeration unit	Air-cooled 200W HFO-1234yf
cooling capacity	384W (330kcal/h)
cooling capacity environment	Water temperature +15℃ 50Hz
Agitator	Twin jet agitation system using a magnetic pump
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, low water level alarm, temperature sensor malfunction, refrigerator protection circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 14A 50/60Hz, 2m cord with plug
others	Drain opening outer diameter Φ12mm
weight	51kg

llustrations

 

• The specially designed temperature controller lets users set and display the temperature in 0.01°C increments. In addition, the twin jet stirring system keeps the temperature uniform inside the tank, so it provides a stable temperature environment even when users use ethylene glycol-based brine as the media liquid.
• Moreover, two models are available: the standard TRL-101FZ and the TRL-101FEZ with enhanced cooling performance.
• Furthermore, users can select either auto-start or auto-stop timer operation, with a maximum setting of 99 hours and 59 minutes.
• Additionally, the heat-resistant glass prevents condensation by working together with the refrigeration unit.

External dimensions	W650×D500×H400mm
Internal dimensions of the tank	W300×D400×H300mm
Effective dimensions inside the tank	W260×D365×H245mm Observation window W250×H143mm
Capacity (L)	32
Temperature range (°C)	-5℃ 60℃
temperature stability	±0.02℃ (at water +10℃)
temperature control	Digital temperature indicator and controller, PID control system, 1/100°C temperature setting and display.
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Cartridge heater 900W (450W x 2)
Refrigeration unit	Air-cooled 130W HFO-1234yf
cooling capacity	169W (146kcal/h)
cooling capacity environment	Water temperature +15℃ 50Hz
Agitator	Twin jet agitation system using a magnetic pump
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, low water level alarm, temperature sensor malfunction, refrigerator protection circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 13A 50/60Hz, 2m cord with plug
others	Drain opening outer diameter Φ12mm
weight	46kg

llustrations

• A high-precision constant-temperature water bath cools down to -20°C and lets users set and monitor the temperature in 0.01°C increments.
• In addition, the specially designed temperature controller and agitator keep the tank temperature uniform. As a result, the bath maintains a stable temperature environment, even when users use ethylene glycol-based brine as the media liquid.
• Furthermore, users can select either auto-start or auto-stop timer operation, with a maximum setting of 99 hours and 59 minutes.

External dimensions	W550 x D410 x H (Aquarium 240 + Control Unit 115) mm
Internal dimensions of the tank	W200×D290×H150mm
Effective dimensions inside the tank	W170×D200×H150mm
Capacity (L)	8
Temperature range (°C)	-20℃ 80℃
temperature stability	±0.01℃ (at water +10℃)
temperature control	Digital temperature indicator and controller, PID control system, 1/100°C temperature display and setting.
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Sheath type 500W
Refrigeration unit	Air-cooled 130W HFO-1234yf
cooling capacity	200W (172kcal/h)
cooling capacity environment	Water temperature +15℃ 50Hz
Agitator	Vertical propeller agitator type, 10W motor
safety equipment	Leakage circuit breaker, self-diagnostic function (prevention of overheating of tank temperature, low water level alarm, temperature sensor malfunction, refrigerator protection circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of height-adjustable stainless steel shelves, one stainless steel lid.
power supply	AC100V 9A 50/60Hz, 2m cord with plug
others	Drain opening outer diameter Φ12mm
weight	Approximately 35kg

llustrations

• A high-precision water tank allows users to set and display the temperature in 0.01°C increments. In addition, it features a wide opening and a flat top surface, so users can handle samples more easily.
• Moreover, the twin jet stirring method provides excellent temperature stability and creates a uniform environment inside the tank.
• Furthermore, users can select either auto-start or auto-stop timer operation, with a maximum setting of 99 hours and 59 minutes.

External dimensions	W530×D415×H420mm
Internal dimensions of the tank	W480×D350×H150mm
Effective dimensions inside the tank	W400×D350×H150mm
Capacity (L)	twenty one
Temperature range (°C)	0℃ 50℃
temperature stability	Within ±0.02℃ (at 10℃ above water temperature)
temperature control	Digital temperature indicator and controller, PID control system, 1/100°C temperature display and setting.
timer	Auto-start timer, auto-stop timer (maximum settable time: 99 hours 59 minutes)
heater	Sheath type 500W
Refrigeration unit	Air-cooled 130W HFO-1234yf
cooling capacity	183W (158kcal/h)
cooling capacity environment	Water temperature +10℃ 50Hz
Agitator	Twin jet agitation system (using a magnetic pump)
safety equipment	Leakage circuit breaker, self-diagnostic function (prevention of overheating of tank temperature, low water level alarm, temperature sensor malfunction, refrigerator protection circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 9A 50/60Hz, 2m cord with plug
others	Drain port outer diameter Φ12mm
weight	30kg

llustrations

• Designed with a low-profile body and a top-mounted control panel, this unit allows users to operate it easily on a tabletop. In addition, it features a 200 mm deep low-temperature constant-temperature water bath, while the 150 mm deep T-22LA model is also available for applications that require a shallower tank.
• Furthermore, users can set and monitor the temperature easily through the digital setting function and digital display. As a result, operation becomes more convenient and efficient.
• Moreover, the PID control system maintains high temperature stability within ±0.1°C, thereby ensuring precise and reliable temperature management throughout operation.
• In addition, the jet agitation system delivers quiet yet powerful agitation. Consequently, it maintains a stable temperature throughout the tank while also providing excellent mixing performance and consistent temperature control.
• For applications that require shaking as well as temperature control, the T-22LAS shaking tank is also available.

• Industrial cooler capable of cooling down to a minimum temperature of -20℃ and a maximum capacity of 200L.
  *May vary depending on the environment and conditions of use.
• The cooling coil is a robust spiral type (copper tube with plated finish).
• Can be incorporated into equipment as a cooling unit.
• By using the dedicated temperature controller TC-107G , it is possible to control the temperature within ±1.0℃ of the set temperature.

External dimensions	W490×D375×H330mm
Cooling capacity	50L to 200L
Temperature range (°C)	-20℃ room temperature
Refrigeration unit	Air-cooled 600W
cooling capacity	①1160W(1000kcal/h) ②850W(730kcal/h) ③240W(206kcal/h)
cooling capacity environment	① Water temperature +10℃ at 50Hz ② Liquid temperature +0℃ at 50Hz ③ Liquid temperature -20℃ at 50Hz
refrigerant	HFC-404A
Cooling coil	φ120 x H350mm spiral type (copper pipe plated finish)
power supply	AC200V, three-phase, 3A, 50/60Hz, 3m cord (no plug), power supply capacity 15A or more.
weight	Approximately 44 kg

Performance graph

Cooling Capacity Table TRL-107G

Liquid Temperature (°C)	Cooling Capacity (W)	Cooling Capacity (kcal/h)
20	1230	1058
10	1160	998
0	850	731
-10	540	464
-20	240	206

Illustrations

Cooling coil

The water temperature inside the tank is clearly displayed digitally, and it’s a simple tank with a temperature controller and a 200mm deep polyethylene tank.
The digital settings and display have been updated, improving accuracy and visibility.

• Temperature control: The digital temperature indicator/controller (PID control method) creates a stable temperature environment with high temperature stability (±0.1℃).
• Safety Features: The unit comes standard with safety features such as a heater dry-boil prevention device and a fuse.
• You can choose from two sizes: standard type (T-4) and deep type (T-4D).
• We also sell the T4 controller separately. (Temperature control unit)
  ・T4 controller

External dimensions	W550×D355×H365mm
Internal dimensions of the tank	W420×D315×H215mm
Effective dimensions inside the tank	W350×D315×H215mm
Capacity (L)	twenty four
Temperature range (°C)	Room temperature +5℃ 60℃ (MAX +80℃) The temperature range is when using the included water tank and Tom Ball. However, Tom Ball is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1kW
Agitator	Jet agitation type
safety equipment	Heat-sensitive heater dry-boil prevention device (manual reset type), power fuse
Material	Aquarium material: Polypropylene
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 6 kg

Illustrations

   

The water temperature in the tank is clearly displayed digitally, and the tank itself is simple, consisting of a temperature controller and a plastic water tank.
The digital settings and display have been updated for improved accuracy and visibility.

• Temperature control: The digital temperature indicator/controller (PID control method) creates a stable temperature environment with high temperature stability (±0.1℃).
• Safety Features : The unit comes standard with safety features such as a heater dry-boil prevention device and a fuse.
• You can choose from two sizes: standard type (T-4) and deep type (T-4D).
• We also sell the T4 controller separately.(Temperature control unit)
  ・T4 controller

External dimensions	W550×D355×H310mm
Internal dimensions of the tank	W420×D315×H160mm
Effective dimensions inside the tank	W350×D315×H160mm
Capacity (L)	17
Temperature range (°C)	Room temperature +5℃ 60℃ (MAX +80℃) The temperature range is when using the included water tank and Tom Ball. However, Tom Ball is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1kW
Agitator	Jet agitation type
safety equipment	Heat-sensitive heater dry-boil prevention device (manual reset type), power fuse
Material	Aquarium material: Polypropylene
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 5.5kg

Illustrations

• How to use:
  By stacking these units, you can set and execute different target temperatures simultaneously in a limited and valuable space. Of course, even a single unit is a high-performance circulating air dryer that rivals larger models.
• The temperature environment inside the unit is kept uniform through a sufficient insulation structure on the top, bottom, left, right, back, and door, forced convection by a sirocco fan, and PID control by a digital temperature controller.
• Safety devices:
  <Overheating prevention alarm> – Automatically cuts off all power when the temperature rises abnormally.
  <Leakage circuit breaker> – Automatically cuts off all power in case of leakage, short circuit, or overcurrent.

External dimensions	W680×D410×H360mm
Furnace dimensions	W350×D300×H200mm
Temperature range (°C)	40℃ 250℃
temperature distribution	±2.5℃ (at +200℃)
temperature stability	±0.2℃ (at +200℃)
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 800W
Agitator	Sirocco fan type 60W condenser motor
safety equipment	Earth leakage circuit breaker, overheat protection alarm
Material	Exterior: Steel plate with baked-on paint finish. Interior: Stainless steel (SUS-304).
accessories	Two shelves (SUS-304)
power supply	AC100V 9A 50/60Hz, 2m cord with plug.
weight	32.5kg

Illustrations

• Renewed constant temperature water bath with digital display up to 100℃.
  High temperature stability of ±0.1℃ with PID control using a digital temperature controller.
• Equipped with high-power heating capabilities with heater capacity matched to the capacity of each aquarium.
• Added a safety device to prevent overheating of the tank.
• The hot water in the tank can be circulated using an optional circulation pump.

Usage example

This product can be used for various water and heat resistance tests (of resins, paints, etc.), wood adhesion strength tests including boiling and peeling tests, and repeated testing.

Specification

External dimensions	W500×D400×H480mm
Internal dimensions of the tank	W450 x D350 x H300 (Effective H260) mm
Capacity (L)	43
Temperature range (°C)	Room temperature +5℃ 100℃ *This temperature range is for use with the lid. However, the lid is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 2kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, tank temperature overheating prevention
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel height-adjustable shelves.
power supply	AC100V 21A 50/60Hz , 3m cord (no plug), Power supply capacity 30A or more.
others	Drain port outer diameter Φ12mm
weight	Approximately 30kg

Illustrations

• Renewed constant temperature water bath with digital display up to 100℃.
  High temperature stability of ±0.1℃ with PID control using a digital temperature controller.
• Equipped with high-power heating capabilities with heater capacity matched to the capacity of each aquarium.
• Added a safety device to prevent overheating of the tank.
• The hot water in the tank can be circulated using an optional circulation pump.

Usage example

This product can be used for various water and heat resistance tests (of resins, paints, etc.), wood adhesion strength tests including boiling and peeling tests, and repeated testing.

External dimensions	W400×D350×H480mm
Internal dimensions of the tank	W350 x D300 x H300 (Effective H260) mm
Capacity (L)	28
Temperature range (°C)	Room temperature +5℃ 100℃ *This temperature range is for use with the lid. However, the lid is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1.4kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, tank temperature overheating prevention
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	One set of stainless steel height-adjustable shelves.
power supply	AC100V 15A 50/60Hz cord with plug, 2m
others	Drain port outer diameter Φ12mm
weight	Approximately 25kg

Illustrations

Temperature Controller Unit: 110,000 + Stainless-Steel Water Tank (BS-22): 54,000

This unit-type constant-temperature water bath combines a digital temperature controller with a stainless-steel water tank. In addition, the insulated stainless-steel tank provides excellent heat retention and helps maintain stable temperatures during operation. The standard tank has a depth of 150 mm. Moreover, users can choose the T-N22, which offers a larger tank with the same depth, or the T-N22D, which provides the same tank size as the T-N22 but increases the depth to 200 mm.

• Temperature Control:
  The temperature controller uses PID control to maintain precise and stable temperatures. As a result, the system achieves excellent temperature stability within ±0.1°C, which supports consistent and accurate temperature management.
• Safety Features:
  The system also includes several safety functions to support reliable operation. For example, overheat protection prevents excessive temperature rise, dry-boil protection safeguards the heater when the water level becomes too low, and built-in fuses provide additional electrical protection.
• Optional External Circulation:
  Furthermore, users can install the optional CP-22 circulation pump to circulate water outside the bath. Therefore, the system can support applications that require external temperature-controlled water circulation.
• Optional Lid and Shelf:
  When users operate the circulation pump together with a lid and shelf, they need a dedicated lid and shelf designed for the pump configuration. In addition, these accessories require an extra cost.

Overall, this compact unit-type constant-temperature water bath combines precise PID temperature control, excellent heat retention, reliable safety functions, and flexible external circulation options. Therefore, users can select the most suitable tank configuration according to their laboratory, testing, or temperature-control requirements.

External dimensions	W360×D390×H320mm
Internal dimensions of the tank	W320×D350×H150mm
Effective dimensions inside the tank	W240×D350×H150mm
Capacity (L)	13
Temperature range (°C)	Room temperature +5℃ 60℃ (Maximum +80℃, but requires a lid) Lid and shelves are not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller with PID control
heater	Sheathed type 1kW (500W x 2)
Agitator	Jet agitation method
safety equipment	Power fuse, overheat protection, dry-running protection.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 11kg

Illustrations

Temperature Controller Unit: 110,000 + Stainless-Steel Water Tank (BD-22): 65,000

This unit-type constant-temperature water bath combines a digital temperature controller with a stainless-steel water tank. In addition, the insulated stainless-steel tank provides excellent heat retention and helps maintain stable water temperatures during operation. The standard tank has a depth of 200 mm. Moreover, users can choose the T-N22 with a depth of 150 mm or the compact T-N22J, which also features a 150 mm-deep tank.

• Temperature Control:
  The temperature controller uses PID control to maintain precise and stable temperatures. As a result, the system achieves excellent temperature stability within ±0.1°C, allowing users to perform temperature-sensitive applications with greater consistency.
• Safety Features:
  The system includes several safety functions to support dependable operation. For example, overheat protection prevents excessive temperature rise, dry-boil protection safeguards the heater when the water level becomes too low, and built-in fuses provide additional electrical protection.
• Optional External Circulation:
  Furthermore, users can install the optional CP-22 circulation pump to circulate water outside the bath. Therefore, the system can support applications that require external temperature-controlled water circulation.
• Drain Port:
  The unit also includes a drain port that allows users to discharge water easily and efficiently. Consequently, routine cleaning, water replacement, and maintenance become more convenient.
• Optional Lid and Shelf:
  When users operate the circulation pump together with a lid and shelf, they need a dedicated lid and shelf designed for the pump configuration. In addition, these accessories require an extra cost.

Overall, this unit-type constant-temperature water bath combines precise PID temperature control, excellent heat retention, convenient drainage, reliable safety functions, and flexible circulation options. Therefore, users can choose a configuration that best suits their laboratory, testing, or temperature-control requirements.

External dimensions	W520×D390×H370mm
Internal dimensions of the tank	W480×D350×H200mm
Effective dimensions inside the tank	W400×D350×H200mm
Capacity (L)	28
Temperature range (°C)	Room temperature +5℃ 60℃ (Maximum +80℃, but requires a lid) Lid and shelves are not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller with PID control
heater	Sheathed type 1kW (500W x 2)
Agitator	Jet agitation method
safety equipment	Power fuse, overheat protection, dry-running protection.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
others	Drainage hose mouth outer diameter Φ10mm
weight	Approximately 14kg

Illustrations

Temperature Controller Unit: 110,000 + Stainless-Steel Water Tank (BM-22): 53,000

This unit-type constant-temperature water bath combines a digital temperature controller with a stainless-steel water tank. In addition, the insulated stainless-steel construction provides excellent heat retention and helps maintain a stable water temperature during operation. The standard stainless-steel tank has a depth of 150 mm. Moreover, users can choose the T-N22D, which offers a deeper 200 mm tank, or the compact T-N22J, which features a smaller 150 mm-deep tank.

• Temperature Control:
  The temperature controller uses PID control to maintain precise and stable temperatures. As a result, the system achieves excellent temperature stability within ±0.1°C, allowing users to perform temperature-sensitive applications with greater consistency.
• Safety Features:
  The system also includes several safety functions to support reliable operation. For example, overheat protection prevents excessive temperature rise, dry-boil protection safeguards the heater when the water level becomes too low, and built-in fuses provide additional electrical protection.
• Optional External Circulation:
  Furthermore, users can install the optional CP-22 circulation pump to circulate water outside the bath. Therefore, the system can support applications that require external temperature-controlled water circulation.
• Optional Lid and Shelf:
  When users operate the circulation pump together with a lid and shelf, they need a dedicated lid and shelf designed for the pump configuration. In addition, these dedicated accessories involve an extra cost.

Overall, this unit-type constant-temperature water bath combines precise PID temperature control, excellent heat retention, reliable safety functions, and flexible external circulation options. Therefore, users can select a suitable configuration according to their laboratory, testing, or temperature-control requirements.

External dimensions	W520×D390×H320mm
Internal dimensions of the tank	W480×D350×H150mm
Effective dimensions inside the tank	W400×D350×H150mm
Capacity (L)	20
Temperature range (°C)	Room temperature +5℃ 60℃ (Maximum +80℃, but requires a lid) Lid and shelves are not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller with PID control
heater	Sheathed type 1kW (500W x 2)
Agitator	Jet agitation method
safety equipment	Power fuse, overheat protection, dry-running protection.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 13 kg

Illustrations

 

This temperature control unit allows users to convert an existing water tank into a constant-temperature water bath. In addition, the redesigned digital setting and display improve both accuracy and visibility, making temperature adjustment and monitoring easier.

• Temperature Control:
  The temperature controller uses PID control to maintain a stable temperature environment. As a result, it achieves excellent temperature stability of ±0.1°C, allowing users to manage temperature accurately and consistently.
• Safety Features:
  The unit also includes standard safety features for reliable operation. For example, the heater dry-boil prevention device protects the heater when the water level becomes too low, while the built-in fuse provides additional electrical protection.
• Available Water Baths:
  In addition to complete products that include water baths, we also offer water baths separately. Therefore, users can select a suitable model according to their application and required capacity.Polyethylene Water Baths
  ・T-4 – Constant-temperature water bath
  ・T-4D – Deep-type constant-temperature water bathStainless-Steel Water Baths
  ・T-4M – Constant-temperature water bath
  ・T-4MD – Deep-type constant-temperature water bath
  ・T-4J – Small-type constant-temperature water bath

  Stainless-Steel Bath Only
  ・BM-22 – for T-4M
  ・BD-22 – for T-4MD
  ・BS-22 – for T-4J

Overall, this temperature control unit combines precise PID temperature control, improved digital operation, and reliable safety functions. Moreover, the wide selection of compatible polyethylene and stainless-steel water baths gives users greater flexibility when building or upgrading a constant-temperature water bath system.

External dimensions	W186×D160×H290mm
Temperature range (°C)	Room temperature +5℃ 60℃ (MAX +80℃) This is based on using our company’s aquarium (BM-22) and Tomball for T4 controllers. Results may vary depending on the material, capacity, and other conditions of the aquarium used.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1kW
Agitator	Jet agitation type
safety equipment	Thermal heater dry-boil prevention device (manual reset type) power fuse
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 4 kg

Illustrations

This deep stainless steel constant-temperature water bath features a clear digital display that shows the water temperature inside while also providing excellent heat retention. In addition, the updated digital setting and display improve both accuracy and visibility, allowing users to monitor and adjust the temperature more easily.

• Temperature Control:
  The digital temperature indicator/controller uses a PID control method to maintain a stable temperature environment. As a result, the system delivers excellent temperature stability of ±0.1°C, which supports precise and reliable temperature control.
• Safety Features:
  The unit includes standard safety functions to support safe and dependable operation. For example, the heater dry-boil prevention device protects the heater when the water level becomes too low, while the built-in fuse provides additional electrical protection.
• Drain Port:
  Furthermore, the unit includes a drain port that allows users to discharge water quickly and properly after use. Therefore, cleaning and maintenance become easier and more convenient.
• Available Sizes:
  Moreover, users can choose from three different sizes to suit various applications:
  ・T-4M – Standard type
  ・T-4MD – Deep type
  ・T-4J – Small type
• Controllers and Stainless-Steel Baths Sold Separately:
  In addition, we also offer T4 controllers and stainless-steel baths separately, giving users greater flexibility when replacing components or selecting a suitable configuration.Temperature Control Unit
  ・T4 ControllerStainless-Steel Bath Only
  ・BM-22 – for T-4M
  ・BD-22 – for T-4MD
  ・BS-22 – for T-4J

Overall, this deep constant-temperature water bath combines precise temperature control, excellent heat retention, practical drainage, reliable safety features, and multiple size options. Therefore, users can select a configuration that best matches their laboratory, testing, or research requirements.

External dimensions	W590×D390×H390mm
Internal dimensions of the tank	W480×D350×H200mm
Effective dimensions inside the tank	W410×D350×H200mm
Capacity (L)	28
Temperature range (°C)	Room temperature +5℃ 60℃ (MAX +80℃) The temperature range is when using the included water tank and Tom Ball. However, Tom Ball is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1kW
Agitator	Jet agitation type
safety equipment	Heat-sensitive heater dry-boil prevention device (manual reset type), power fuse
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
others	Drainage hose mouth outer diameter Φ10mm
weight	Approximately 14kg

Illustrations

This stainless steel constant-temperature water bath features a clear digital display that shows the water temperature inside the bath while also providing excellent heat retention. In addition, the updated digital setting and display improve both temperature accuracy and visibility, making the unit easier and more reliable to operate.

• Temperature Control:
  The digital temperature indicator/controller uses a PID control method to maintain a stable temperature environment. As a result, the system achieves excellent temperature stability of ±0.1°C and allows users to monitor and control the temperature with high precision.
• Safety Features:
  The unit includes several standard safety features to ensure reliable operation. For example, the heater dry-boil prevention device protects the heater when the water level becomes too low, while the built-in fuse provides additional electrical protection.
• Available Sizes:
  Moreover, users can choose from three different sizes depending on their application and available space:
  ・T-4M – Standard type
  ・T-4MD – Deep type
  ・T-4J – Small type
• Controllers and Stainless-Steel Baths Sold Separately:
  In addition, we also offer T4 controllers and stainless-steel baths separately, which gives users greater flexibility when selecting or replacing individual components.Temperature Control Unit
  ・T4 ControllerStainless-Steel Bath Only
  ・BM-22 – for T-4M
  ・BD-22 – for T-4MD
  ・BS-22 – for T-4J

Overall, this water bath combines precise temperature control, strong heat retention, reliable safety functions, and several size options. Therefore, users can select the most suitable configuration according to their specific laboratory or testing requirements.

External dimensions	W590×D390×H340mm
Internal dimensions of the tank	W480×D350×H150mm
Effective dimensions inside the tank	W410×D350×H150mm
Capacity (L)	20
Temperature range (°C)	Room temperature +5℃ 60℃ (MAX +80℃) The temperature range is when using the included water tank and Tom Ball. However, Tom Ball is not included.
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 1kW
Agitator	Jet agitation type
safety equipment	Heat-sensitive heater dry-boil prevention device (manual reset type), power fuse
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 10A 50/60Hz, 2m cord with plug.
weight	Approximately 13 kg

Illustrations

• This machine utilizes the large usable space of its liquid tank to be used for hot oil testing of printed circuit boards, heat resistance reliability testing of electrical components, and thermal testing of dental materials, etc.
• Horizontal moving thermal shock testing apparatus. The horizontal moving structure allows for testing of heavy samples.
• Equipped with a dedicated structure and controller for thermal shock testing.
• Various safety devices designed for long-term operation.
• An automatic water supply function is available as an option to prevent water evaporation during continuous use.
• *We also accept consultations for custom-made models to meet customer specifications regarding temperature range, ancillary equipment, etc.
• *Automatic water supply function is only available when water is used as the liquid.
• *In this case, the customer is responsible for connecting the piping to the waterway.
• *The price is a reference price. We will discuss it with you after you have confirmed the specifications and usage conditions.

• specification

  External dimensions	W1600×D900×H1640mm
  Capacity (L)	Low temperature tank: 59L High temperature tank: 46L
  Temperature range (°C)	0℃ 260℃ Low-temperature chamber: 0°C to room temperature (when there is no load inside the chamber) High-temperature chamber: Room temperature to +260°C
  temperature stability	Low temperature chamber: ±1°C; High temperature chamber: ±0.2°C (when the chamber is unloaded)
  power supply	AC200V, three-phase, 21A (at full load), 50/60Hz, 3m cord (no plug), power supply capacity 30A or more.

  high temperature bath	Internal dimensions of the tank	W350×D400×H350mm
  	Effective dimensions inside the tank	W350×D300×H330mm
  	Temperature range	Room temperature to +260℃
  	temperature stability	±0.2℃ (when the tank is unloaded)
  cryostat	Internal dimensions of the tank	W400×D450×H350mm
  	Effective dimensions inside the tank	W350×D300×H330mm
  	Temperature range	0°C to room temperature (when the chamber is unloaded)
  	temperature stability	±1℃
  Drive unit	Drive system	Motor-driven by a reversible motor; horizontal and vertical movement.
  	Immersion time	Variable
  	liquid draining time	Variable
  	counter	6-digit preset type (automatically stops after adding up to the set value)

• A dedicated thermal shock testing device with a proven track record of over 1,000,000 cycles and a highly durable, specialized structure.
• Equipped with an easy navigation function, the display unit is a touch panel type for easy settings.
• The simple gondola-type moving arm ensures ease of maintenance.
• Various safety devices designed for long-term operation.
• An automatic water supply function is available as an option to prevent water evaporation during continuous use.
• The temperature range for the TTS-1 is low temperature (-20℃ to +80℃) and high temperature (room temperature to +200℃), but please note that the usable temperature range may vary depending on the liquid used.

• Specification

  External dimensions	W900×D820×H1100mm
  Capacity (L)	Low temperature tank: 19L High temperature tank: 16L
  Temperature range (°C)	-20℃ 200℃ Low temperature chamber: -20 to +80℃ High temperature chamber: Room temperature to +200℃
  temperature stability	Low temperature chamber: ±0.1℃ High temperature chamber: ±0.1℃
  temperature control	Touch panel control PID control system
  power supply	AC200V, three-phase, 20A, 50/60Hz, 3m cord (no plug), power supply capacity 30A or more.
  others	Drain opening, outer diameter Φ16mm
  Price (excluding tax)	¥4,950,000
  option	Automatic water supply function* ¥130,000
  Overflow port	3/8 inch socket

  mperature bath	Internal dimensions of the tank	W300×D450×H150mm
  	Effective dimensions inside the tank	W300×D325×H150mm
  	Temperature range	Room temperature to +200℃
  	temperature stability	±0.1℃
  	heater	Sheathed wire type 1.5kW
  	Agitator	Jet agitation type 60W motor
  	safety equipment	High temperature abnormality, low temperature abnormality, water tank water level abnormality
  cryostat	Internal dimensions of the tank	W340×D490×H150mm
  	Effective dimensions inside the tank	W300×D325×H150mm
  	Temperature range	-20 to +80℃
  	temperature stability	±0.1℃
  	Refrigeration unit	Air-cooled 400W
  	heater	Sheathed wire type 1.5kW
  	Agitator	Jet agitation type 60W motor
  	safety equipment	Temperature abnormality, temperature abnormality, low temperature abnormality, water level abnormality, refrigerator protection circuit
  Drive unit	Drive system	Speed-controlled capacitor motor drive (electromagnetic brake type)
  	Immersion method	Immersion timer (maximum 9999 hours) Variable immersion counter (maximum 999999 counts) Variable
  	Stackable weight	MAX 2kg
  	safety equipment	Mobile device overcurrent abnormality, motor abnormality
  Temperature control		Touch panel control PID control system
  option		Automatic water supply function: ¥120,000 (However, this requires tap water piping)

• A constant temperature liquid bath for kinematic viscosity measurement in low-temperature ranges, employing a dual-stage refrigeration system. Temperature range: -50°C to 0°C, temperature stability: within ±0.03°C.
• Large windows with excellent visibility:The windows are equipped with a structure that allows nitrogen gas to be circulated to prevent freezing and condensation when used at low temperatures.
• Safety Features:
  Equipped with various safety features such as overheat protection and liquid level drop alarm.
  The glass safety cover prevents scattering of glass fragments in the event of breakage of the glass liquid tank and also minimizes the effects of external disturbances

External dimensions	W900 x D600 x H1235mm (water tank 1100mm + stirring section 135mm)
Internal dimensions of the tank	W220×D250×H350mm
Capacity (L)	18
Temperature range (°C)	-50℃ 0℃
temperature stability	Within ±0.03℃
temperature control	Digital temperature indicator and controller with PID control
Number of viscometers	2
heater	Sheath type 750W
Refrigeration unit	Air cooling type 400W (HFC-134a) + 400W (HFC-23) dual refrigeration method
Agitator	Vertical propeller agitator type, 22W motor
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish Observation window: Inner tank side/triple double-glazed glass, Exterior side/glass
Lighting device	6W fluorescent lamp
accessories	Two three-in-one viscometer holders (Cannon-Fenske type, Ubbelohde type, and backflow U-tube type)
power supply	AC100V 20A 50/60Hz, 3m power cord (no plug), power supply capacity 30A or more.
weight	Approximately 200 kg

Illustrations

   

• A constant-temperature liquid bath for kinematic viscosity measurement in low-temperature ranges, equipped with a large, highly visible window and a refrigerator.
  Temperature range: +5°C to +50°C, Temperature stability: ±0.01 to 0.02°C
• Equipped with a preset function that allows you to register up to 5 operating temperatures.
  Temperature compensation can be set for each preset value.
• Safety Features:
  Equipped with various safety features such as overheat protection and liquid level drop alarm.
  The glass safety cover prevents spillage due to breakage of the glass liquid tank and also minimizes the effects of external disturbances.

External dimensions	W550 x D320 x H755 (Aquarium 645 + Stirring motor 110) mm
Internal dimensions of the tank	W300×D200×H350mm
Capacity (L)	20
Temperature range (°C)	5℃ 50℃
temperature stability	±0.02℃
temperature control	Digital temperature controller with PID control, temperature compensation function, manual temperature setting, and 5-point preset temperature setting.
Number of viscometers	3 bottles
heater	Sheath type 850W
Refrigeration unit	Air-cooled 130W HFO-1234yf
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, refrigeration unit protection circuit, self-diagnostic function (overheating prevention alarm in tank, low water level, heater disconnection, temperature sensor malfunction, triac malfunction)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish Observation window: Inner tank side/double-glazed glass, Exterior side/glass
Lighting device	6W fluorescent lamp
accessories	Three-in-one viscometer holder* (*Cannon-Fenske type, Ubbelohde type, and backflow U-tube type)
power supply	AC100V 13A 50/60Hz, 2m cord with plug
others	Drain opening, outer diameter Φ12mm
weight	Approximately 36kg

Illustrations

• A constant-temperature liquid bath for kinematic viscosity measurement in high-temperature ranges, equipped with a large, highly visible window.
  Temperature range: Room temperature +10°C to +200°C, temperature stability ±0.01 to 0.02°C.
• Equipped with a preset function that allows you to register up to 5 operating temperatures.
  Temperature compensation can be set for each preset value.
• Safety Features:
  Equipped with various safety features such as overheat protection and liquid level drop alarm.
  The glass safety cover prevents spillage due to breakage of the glass liquid tank and also minimizes the effects of external disturbances.

External dimensions	W600 x D360 x H545 (Aquarium 420 + Stirring motor 125) mm
Internal dimensions of the tank	W350×D250×H350mm
Capacity (L)	29
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	±0.01℃ to 0.02℃
temperature control	Digital temperature controller with PID control, temperature compensation function, manual temperature setting, and 5-point preset temperature setting.
Number of viscometers	7 bottles
heater	Sheath type 2kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, tank over-temperature protection device, self-diagnostic function (low water level, heater disconnection, temperature sensor malfunction, triac malfunction)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
Lighting device	6W fluorescent lamp
accessories	Three-in-one viscometer holder* (7 pieces) (*Cannon-Fenske type, Ubbelohde type, and backflow U-tube type)
power supply	AC100V 22A 50/60Hz, 3m cord (no plug), Power supply capacity 30A or more
others	Drain opening, outer diameter Φ12mm
weight	Approximately 34kg

Illustrations

• This is a highly visible, round-shaped constant-temperature liquid bath for kinematic viscosity measurement. It provides a constant temperature environment from room temperature +10°C to +99.9°C and controls the temperature with high accuracy, with a temperature stability of ±0.01 to 0.02°C.
• Can be used with a wall outlet.
  　*A high-power type TV-5NS (AC100V 18A) is also available as a separate model.
• Equipped with a preset function that allows you to register up to 5 operating temperatures. Temperature compensation can be set for each preset value.
• Safety Features:
  Equipped with various safety features such as overheat protection and liquid level drop alarm.
  The polycarbonate safety cover prevents spillage due to breakage of the glass liquid tank and also reduces the effects of external disturbances.

External dimensions	W560×D390×H540mm
Internal dimensions of the tank	φ300×H350mm
Capacity (L)	twenty four
Temperature range (°C)	Room temperature +10℃ 90℃ MAX99.9
temperature stability	±0.01℃ to ±0.02℃
temperature control	Digital temperature indicator and controller with PID control system and temperature compensation function. Manual temperature setting and 5-point preset setting.
Number of viscometers	5 bottles
heater	Sheathed type 1.3kW
Agitator	Vertical propeller agitation system, 22W motor
safety equipment	Leakage circuit breaker, tank over-temperature protection device, self-diagnostic function (low water level, heater disconnection, temperature sensor malfunction, triac malfunction)
Material	Inner tank: Round, hardened glass Exterior: Steel plate with baked-on paint finish, with safety cover (transparent polycarbonate)
Lighting device	6W fluorescent lamp
accessories	Three-in-one viscometer holder* (5 pieces)　 (*Cannon-Fenske type, Ubbelohde type, inverted U-tube type)
power supply	AC100V 14A 50/60Hz, 2m cord with plug
weight	Approximately 33kg

Illustrations

 

• This is a highly visible, round-shaped constant-temperature liquid bath for kinematic viscosity measurement.It provides a constant temperature environment from room temperature +10°C to +99.9°C and controls the temperature with high accuracy, with a temperature stability of ±0.01 to 0.02°C.We also have the TV-5ES (AC100V14A) which can be used with a wall outlet.
• Equipped with a preset function that allows you to register up to 5 operating temperatures. Temperature compensation can be set for each preset value.
• Safety Features: Equipped with various safety features such as overheat protection and liquid level drop alarm. The polycarbonate safety cover prevents spillage due to breakage of the glass liquid tank and also reduces the effects of external disturbances.

External dimensions	W560×D390×H540mm
Internal dimensions of the tank	φ300×H350mm
Capacity (L)	twenty four
Temperature range (°C)	Room temperature +10℃ 90℃ MAX99.9
temperature stability	±0.01℃ to ±0.02℃
temperature control	Digital temperature indicator and controller with PID control system and temperature compensation function. Manual temperature setting and 5-point preset setting.
Number of viscometers	5 bottles
heater	Sheathed type 1.7kW
Agitator	Vertical propeller agitation system, 22W motor
safety equipment	Leakage circuit breaker, tank over-temperature protection device, self-diagnostic function (low water level, heater disconnection, temperature sensor malfunction, triac malfunction)
Material	Inner tank: Round, hardened glass Exterior: Steel plate with baked-on paint finish, with safety cover (transparent polycarbonate)
Lighting device	6W fluorescent lamp
accessories	Three-in-one viscometer holder* (5 pieces)　 (*Cannon-Fenske type, Ubbelohde type, inverted U-tube type)
power supply	AC100V 18A 50/60Hz, 3m cord (no plug), Power supply capacity 30A or more
weight	Approximately 33kg

Illustrations

• Medium to low temperature wide range type Celsius temperature range 0 to +100℃, temperature stability within ±0.05℃
• Can be used in a wide temperature range from 0°C to 100°C.
• Equipped with various safety features such as over-temperature protection and liquid level drop alarm.
• By using a liquid as the medium, a uniform and disturbance-resistant temperature environment is achieved compared to an air chamber.

External dimensions	W550 x D500 x H940 (Aquarium 830 + Stirring motor 110) mm
Internal dimensions of the tank	W300×D240×H400mm
Capacity (L)	28
Temperature range (°C)	0℃ 100℃
temperature stability	Within ±0.05℃
temperature control	Digital temperature indicator and controller, PID control system
Number of measuring thermometers	10 units (includes 10 thermometer holders and 1 holder for a reference thermometer)
heater	Sheath type 1.4kW
Refrigeration unit	Air-cooled 200W HFC-134a
Agitator	Vertical propeller agitator type 22W motor
safety equipment	Leakage circuit breaker, over-temperature prevention alarm inside the tank, low-level alarm, refrigerator protection circuit
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 20A 50/60Hz, 3m cord (no plug), Power supply capacity 30A or more
others	Drain opening, outer diameter Φ16mm
weight	Approximately 65 kg

Illustrations

This is a high-temperature constant-temperature oil bath capable of reaching a maximum temperature of +300°C.
Equipped with a 4kW heater in a 38L capacity, it maintains stable performance even at temperatures above +200°C.
A powerful agitator motor allows it to handle highly viscous oils (MAX 100 mm²/S).
A separate model, the T-301, with a 16L capacity and a 2kW heater, is also available.

•  High temperature stability due to safety device PID control
• Safety Features: Equipped with various safety functions such as over-temperature protection, sensor malfunction detection, and liquid level drop alarms for use in high-temperature ranges.
  Note: Even with silicone oil (heat-resistant type), 200°C to 300°C is a demanding operating condition.
  Above 250°C, smoke generation increases significantly, and the lifespan is shortened due to oxidation, so careful management is necessary.

External dimensions	W580×D490×H555mm
Internal dimensions of the tank	W350×D390×H300mm
Effective dimensions inside the tank	W350×D290×H265mm
Capacity (L)	38
Temperature range (°C)	Room temperature +10℃ 300℃
temperature stability	±0.05℃ (at 200℃ with silicone oil and lid)
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 4kW
Agitator	Vertical propeller-type agitator 22W motor (with heat sink)
safety equipment	Leakage circuit breaker, overheat prevention in tank, sensor malfunction alarm, liquid level drop alarm.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel lid (1 piece) Stainless steel shelf (1 set)
power supply	AC200V, three-phase, 13A, 50/60Hz,　 3m cord (no plug), power supply capacity 20A or more.
others	Drain opening outer diameter Φ12mm
weight	Approximately 37kg

Illustrations

 

This is a high-temperature constant-temperature oil bath with a maximum operating temperature of +300°C. It
has a 16L capacity and is equipped with a 2kW heater. It maintains stable performance even at high temperatures above 200°C.
The powerful agitator motor allows it to handle highly viscous oils (MAX 100 mm²/S).
A separate model, the T-305, is also available with a 38L capacity and a 4kW heater.

• High temperature stability through PID control.
• Safety Features: Equipped with various safety functions such as over-temperature protection, sensor malfunction detection, and liquid level drop alarms for use in high-temperature ranges.
  Note: Even with silicone oil (heat-resistant type), 200°C to 300°C is a demanding operating condition.
  Above 250°C, smoke generation increases significantly, and the lifespan is shortened due to oxidation, so careful management is necessary.

External dimensions	W520×D400×H465mm
Internal dimensions of the tank	W300×D300×H200mm
Effective dimensions inside the tank	W300×D200×H200mm
Capacity (L)	16
Temperature range (°C)	Room temperature +10℃ 300℃
temperature stability	±0.05℃ (at 200℃ with silicone oil and lid)
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheath type 2kW
Agitator	Vertical propeller-type agitator 22W motor (with heat sink)
safety equipment	Leakage circuit breaker, overheat prevention in tank, sensor malfunction alarm, liquid level drop alarm.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel lid (1 piece) Stainless steel shelf (1 set)
power supply	AC100V 21A 50/60Hz , 3m cord (no plug), Power supply capacity 30A or more
others	Drain opening outer diameter Φ12mm
weight	Approximately 25kg

Illustrations

This is a high-temperature constant-temperature oil bath with a maximum operating temperature of +300°C.
Equipped with a 1kW heater in a compact body, it boasts high heating power and maintains stable performance even at high temperatures above +200°C.
A powerful stirring motor allows it to handle highly viscous oils. (MAX 100 mm²/s)

• High temperature stability (±0.05℃) due to PID control.
• Safety Features:Equipped with various safety functions such as overheat protection and sensor malfunction prevention to suit use in high-temperature ranges
  . Note: Even with silicone oil (heat-resistant type), 200°C to 300°C is a demanding operating condition.
  Above 250°C, smoke generation increases significantly, and oxidation shortens the lifespan, so careful management is necessary.

• Specification

  External dimensions	W360×D350×H465mm
  Internal dimensions of the tank	W150×D250×H200mm
  Effective dimensions inside the tank	W150×D150×H200mm
  Capacity (L)	7
  Temperature range (°C)	Room temperature +10℃ 300℃
  temperature stability	±0.05℃ (at 200℃ using silicone oil TSF458-100 and a lid)
  temperature control	Digital temperature indicator and controller, PID control system
  heater	Sheath type 1kW
  Agitator	Vertical propeller-type agitator 22W motor (with heat sink)
  safety equipment	Leakage circuit breaker, overheat prevention inside the tank, sensor malfunction alarm.
  Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
  accessories	Stainless steel lid (1 piece), Stainless steel shelf (1 set)
  power supply	AC100V 11A 50/60Hz, 2m cord with plug.
  others	Drain opening outer diameter Φ12mm
  weight	Approximately 18 kg

  Illustrations

  

This large-capacity constant-temperature oil bath boasts a 105L capacity and ample usable space, making it suitable for various material tests and indirect heating for constant temperature applications using containers.
Equipped with a 4kW heater, it offers high heating power, reaching a maximum temperature of +200°C.
A powerful stirring motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• High temperature stability (±0.1℃) due to PID control and two powerful stirring motors.
• Equipped with various safety features such as overheat protection, dry-boil protection, and liquid level drop alarm.
• Timer operation is available.
  Selectable auto-stop/auto-start timer (maximum 99 hours 59 minutes)

External dimensions	W900 x D590 x H700mm (530mm to the top)
Internal dimensions of the tank	W610×D450×H420mm
Effective dimensions inside the tank	W500×D450×H420mm
Capacity (L)	105
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
timer	Auto start timer or auto stop timer: Maximum 99 hours 59 minutes
heater	Sheath type 4kW
Agitator	Vertical propeller agitator type, 90W motor x 2
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, heater disconnection, temperature sensor malfunction, low liquid level, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel shelf board, stainless steel lid
power supply	AC200V single phase 22A 50/60Hz, 3m cord without plug, power supply capacity 30A or more.
others	Drain opening outer diameter Φ16mm
weight	102kg

Illustrations

This constant-temperature oil bath has a 36L capacity and ample usable space, and can be used up to +200°C.
Its powerful agitator motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• *A standard AC100V 15A wall outlet can be used.
  A separate model, the T-205 (AC200V 20A), which provides more powerful heating, is also available.
• High temperature stability through PID control.
• Equipped with various safety features such as overheat protection, dry-boil protection, and liquid level drop alarm.
• Timer operation is selectable:
  Auto-stop/auto-start timer (maximum 99 hours 59 minutes)

External dimensions	W640×D380×H500mm
Internal dimensions of the tank	W440×D300×H300mm
Effective dimensions inside the tank	W350×D300×H300mm
Capacity (L)	36
Temperature range (°C)	Room temperature +10℃ 200℃
temperature distribution	±0.2℃ (180℃ using silicone oil)
temperature stability	±0.05℃ (using 120℃ silicone oil)
temperature control	Digital temperature indicator and controller, PID control system
timer	1 minute to 99 hours 59 minutes Auto Start Timer or Auto Stop Timer
heater	Sheathed type 1.4kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, heater disconnection, temperature sensor malfunction, low liquid level, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304)　 Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel height-adjustable shelf board (1 set)
power supply	AC100V 15A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 25kg

Illustrations

This constant-temperature oil bath has a 36L capacity and ample usable space, and can be used up to +200°C.
Its powerful agitator motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• *The T-205 is a high-power type that prioritizes heat output.
  A separate model, the T-205e (AC100V15A), which can be used with a wall outlet, is also available.
• High temperature stability through PID control.
• Equipped with various safety features such as overheat protection, dry-boil protection, and liquid level drop alarm.
• Timer operation is selectable.
  Selectable auto-stop/auto-start timer (maximum 99 hours 59 minutes)

External dimensions	W640×D380×H500mm
Internal dimensions of the tank	W440×D300×H300mm
Effective dimensions inside the tank	W350×D300×H300mm
Capacity (L)	36
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	±0.05℃ (using 120℃ silicone oil)
temperature control	Digital temperature indicator and controller, PID control system
timer	1 minute to 99 hours 59 minutes Auto Start Timer or Auto Stop Timer
heater	Sheath type 2kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, self-diagnostic function (overheating of tank temperature, heater disconnection, temperature sensor malfunction, low liquid level, triac short circuit)
Material	Inner tank: Stainless steel (SUS-304)　 Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel height-adjustable shelf board (1 set)
power supply	AC100V 20A 50/60Hz, 3m cord (no plug), Power supply capacity 30A or more.
others	Drain opening outer diameter Φ12mm
weight	Approximately 25kg

Illustrations

This is a high-performance, compact, externally circulating constant-temperature oil bath with a 16L capacity.
It reaches a maximum temperature of +200°C in approximately 100 minutes.
A powerful agitator motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• High temperature stability (±0.1℃) due to PID control for temperature control.
• Safety features include an over-temperature prevention alarm and a low liquid level alarm.
• External circulation function:
  In addition to testing within the tank, it is possible to circulate high-temperature liquids up to +200°C externally to heat and maintain a constant temperature for external equipment.
  *A basic constant-temperature oil bath without circulation function, “T-201,” is also available.

External dimensions	W500×D385×H410mm
Internal dimensions of the tank	W300×D310×H200mm
Effective dimensions inside the tank	W300×D220×H200mm
Capacity (L)	16
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheathed type 1.2kW
Agitator	By a circulation pump that also serves as an agitator
Circulation pump	60W motor for both agitation and pumping Maximum head: 2m Maximum flow rate: 2.8L/min Maximum discharge pressure: 0.02Mpa (100mm²/s, based on room temperature oil)
Circulation IN-OUT	Outer diameter φ12 hose connection (Rp 3/8)
safety equipment	Leakage circuit breaker, overheat prevention in tank, low liquid level alarm.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel shelf board (1 set)
power supply	AC100V 13A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 16 kg

Illustrations

This is a high-performance, compact constant-temperature oil bath with a 16L capacity.
It reaches a maximum temperature of +200°C in approximately 100 minutes.
A powerful agitator motor allows it to handle even highly viscous oils (MAX 100 mm²/s).

• High temperature stability (±0.1℃) due to PID control for temperature control.
• Safety features include an over-temperature prevention alarm and a low liquid level alarm.
• *In addition, we also offer the “T-201P” model, which has an external circulation function and can deliver liquid media up to 200°C.

External dimensions	W500×D385×H410mm
Internal dimensions of the tank	W300×D310×H200mm
Effective dimensions inside the tank	W300×D220×H200mm
Capacity (L)	16
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	Within ±0.1℃
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheathed type 1.2kW
Agitator	Vertical propeller agitator type, 22W motor
safety equipment	Leakage circuit breaker, overheat prevention in tank, low liquid level alarm.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
accessories	Stainless steel shelf board (1 set)
power supply	AC100V 13A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 16 kg

Illustrations

This is a modular constant-temperature oil bath consisting of a removable temperature controller and a highly insulated oil bath.
The compact design of the temperature controller allows for ample space within the bath.

• It can heat up to a maximum temperature of +200℃.
• The powerful agitator motor allows it to handle even highly viscous oils. (MAX 100 mm²/s)
• Temperature control
• High temperature stability through PID control
• Safety device
• Equipped with various safety features such as overheat protection and dry-boil protection.

External dimensions	W670×D410×H335mm
Internal dimensions of the tank	W500×D350×H150mm
Effective dimensions inside the tank	W425×D350×H150mm
Capacity (L)	twenty one
Temperature range (°C)	Room temperature +10℃ 200℃
temperature stability	±0.2℃ ( using silicone oil Element14PDMS100-J at 150℃ )
temperature control	Digital temperature indicator and controller, PID control system
heater	Sheathed type 1.2kW
Agitator	Jet agitation system, 60W motor
safety equipment	Overheating prevention alarm, heater dry-running prevention, power fuse.
Material	Inner tank: Stainless steel (SUS-304) Exterior: Steel plate with baked-on paint finish
power supply	AC100V 13A 50/60Hz, 2m cord with plug.
others	Drain opening outer diameter Φ12mm
weight	Approximately 19 kg

Illustrations