Feature

• MA is for 1:1/2:1
• MX is for 4:1/10:1

Specifications

Feature

• Available for ME/MS high-pressure use in two-component mixing equipment.
• MR-Element is a type that uses a rotating mechanism.
• Housing : PP, Element : Polyacetal

Specifications

Feature

• For Plas-Pak/MIXPAX200･400 (1:1/2:1)
• Primarily used for construction purposes.
• Housing : PP, Element : PP/Polyacetal
  

Specifications

Feature

• For MC-Plas-Pak/MIXPAX200･400 (1:1/2:1)
• For MCX-MIXPAX200･400 (4:1/10:1)
• Housing : PP, Element : PP

Specifications

Feature

• For Plas-Pak/MIXPAX200･400 (1:1/2:1)
• Housing : PP, Element : PP / Polyacetal

Specifications

Feature

• It can stir and degas simultaneously.
• Standard commercially available containers can be attached directly.
• Built-in vacuum pump.
• Successor model to the UV-20 L-type

Specifications

Feature

• Equipped with a vacuum pump that can perform stirring and degassing simultaneously.
• The tank holder is adjustable, allowing for the attachment of material cans ranging from 80mm to 180mm in diameter.
• The use of a transparent vacuum chamber allows you to check the stirring state.
• Vacuum chamber with rise slider function
• Successor model to the Mini Defoamer

Specifications

Feature

• It allows you to perform tasks such as mixing liquids, toning colors, and dispersing precipitates in a short amount of time.
• Automatic clockwise/counterclockwise rotation and a digital timer function automatically end the stirring process.
• The adjustable holder allows for stirring of containers of approximately 1 to 4 liters. (By using a custom-made blade, containers with a diameter of 90 to 180 mm can be used.)
• Successor model to the Mini Hard Mixer

Specifications

Feature

• It has a simple mechanism and is easy to operate.
• Cleaning and maintenance after operation are also easy.
• Maximum mixing ratios are 100:100 and 200:1. The usable viscosity ranges from 1 to 1,000,000 cps, providing a wide range of applications.
• It can also handle liquids containing fillers such as silica and alumina.
• Mixing discharge volume up to a maximum of 1000cc/shot.
• Ideal for integration into factory automation (FA) lines.
• It comes with a variety of options, including a heater and degassing functions.

Specifications

Feature

• Once you put the materials into the tank, the machine processes them automatically.
• Lightweight and compact design for easy portability.
• High-precision dispensing with a unique positive load metering system.
• A wide range of options and applications.
• It comes with a variety of options, including a heater and degassing functions.

Specifications

Feature

• Mixing ratio: 100 : 100-14 (fixed ratio depending on pump diameter combination)
• This system precisely measures and mixes two-part resins, a process previously done manually.
• It eliminates resin waste and contributes to the creation of consistent, high-quality products.
• With environmental concerns in mind, we use disposable static mixers for mixing. Since no cleaning solution is used, maintenance is significantly reduced.
• By employing a volumetric metering system, there is no variation in the discharge volume due to changes in liquid viscosity.

Specifications

Feature

• Air-pressure tanks are primarily used in conjunction with liquid metering devices to transport liquids ranging from low viscosity liquids like water to medium viscosity liquids (50,000 cps) using air pressure.
• They are ideal for uniformly transporting a consistent amount of liquid in combination with timers, dosing valves , etc.
• Air-pressure tanks are broadly classified into suction-type and bottom-discharge-type tanks; considering the liquid viscosity and handling method. 

Tank Dimensions Standard Table

Feature

• Improved trajectory performance – excellent trajectory accuracy
• Can be controlled in conjunction with coating equipment
• Easy point setting for circular and arc lines for line coating
• Fill-in function
• Temporary coating application
• Automatic adjustment when changing nozzles (optional)

Specifications

*1: A 4-axis version including theta axis is also available.
*2: XY axis movement ranges of 400 x 400 mm, 510 x 510 mm, and 510 mm x 620 mm can also be manufactured.

Feature

• High-precision balance capable of measuring up to 300g
• High-precision display with a resolution of 0.01g
• Tare function and auto-off function
• Calibration possible with weights
• Easy-to-read LCD display with backlight
• Suitable for a wide range of applications including weighing, research, chemicals, gemstones, precious metals, pigments, etc.
• Hard cover protects the scale when not in use or when transporting it.

Specifications

Feature

• The SN series “Nozzle Check” is a check valve developed to prevent liquid dripping from the nozzle tip when using syringes, etc.
• It reliably seals a wide range of liquid materials, from watery, low-viscosity to high-viscosity, ensuring smooth liquid flow and stable operation. Furthermore, the use of highly durable “perfluoro O-rings” allows it to handle various liquid materials.
• It features a simple mechanism consisting of a Teflon ball and a spring, requiring no adjustments and making cleaning easy.

Specifications

Feature

• A nozzle with a soft brush allows for uniform application to flat surfaces.

Specifications

Feature

• High-flow nozzle that can be attached to a 1/4-inch female threaded connector.

Specifications (Unit : mm)

Feature

• The tapered shape inside the nozzle reduces resistance during dispensing, making it effective for liquids containing fillers or high viscosity liquids.

Specifications (Unit : mm)

Feature

• Suitable for a wide range of uses.
• In liquid dispensing, the nozzle at the outlet greatly affects work efficiency. 

Nozzle Dimensions Standard Table

Feature

• The parts in contact with the fluid are made of resin and are of the cartridge type.
• The disposable tank can always be kept clean.
  

Specifications

Feature

• When used in conjunction with an air-powered controller, it enables compact, simple, and highly accurate dispensing operations.
• Capacities are available from 6cc to 50cc depending on the application.
• UV-resistant syringes are also available.

Syringe Body Specifications

Feature

• Lightweight type (body weight: 250g)
  The gun body is made of resin, so it is much lighter than conventional metal guns and is ideal for long hours of work.
• Air-powered for a smooth and uniform finish.
  It has an air flow adjustment knob so you can adjust the discharge amount according to your application. Operation is as simple as pulling the trigger, so anyone can use it easily.
• Easily attaches commercially available cartridges (330c.c.) Simply insert the cartridge into the gun body and tighten the cap. It is compatible with all commercially available cartridges (JIS standard 330c.c.).
• Air-powered and affordable
  It is easy to purchase. In addition, we also offer a regulator unit as an option, which includes a nylon hose, regulator, hose joint, and quick coupler.

Feature

• Can be attached to various dispenser syringes from φ15 to φ50.
• One-touch removal using Velcro.
• Thin switch with minimal operation and a light click feel.
• Dustproof type with rubber seal to prevent the entry of dirt and dust.
• Can be attached to various tools, etc.
• Custom sizes can also be manufactured.
  

Specification

Feature

• A version compatible with commercially available cartridges (330cc) is also available.

External dimensions

Feature

• Ultra-compact design, ideal for integration into automated equipment.
• Made of stainless steel.
• Uses a needle valve system.
• Easy installation.
• Air ports are located in two places: front and side.
• Equipped with a flow rate adjustment mechanism.

Specification

Feature

• A cartridge that allows to use 100g tube adhesive directly.
• The clear design allows to check the remaining amount.

Specification

External dimensions

Feature

• Ultra-compact design, ideal for integration into automated equipment.
• Made of stainless steel.
• Uses a needle valve system.
• Easy installation.
• Air ports are located in two places: front and side.
• Equipped with a flow rate adjustment mechanism.

Specification

Feature

• Because it’s a small-area spray, it reduces the waste of liquid.
• The liquid volume and air volume can be adjusted at your fingertips.
• The spray nozzles are compatible with the FU-3-6 and come in a wide variety of options.
• By combining it with a pressurized tank, the evaporation of the liquid agent can be reduced, allowing it to be used completely.
  

Specification

*This may vary depending on viscosity and work content.

Feature

• The needle length and diameter can be selected as desired, and it can also be used as a dispenser gun (suitable for potting and drawing lines).
• Ultra-compact and lightweight design. Easily attaches to a 10mm diameter round bar using the included holder.
• Ideal for integration into automated production lines.

Specification

Feature

• A spray gun with a new mechanism that allows spraying from the needle tip.
• The needle length and diameter can be selected arbitrarily, and it can also be used as a dispenser gun. (Potting and line drawing are possible.)
• Ultra-compact and lightweight design of 20mm x 50mm x 45mm x 100g, and can be easily attached to a 10φ round bar using the included holder.
• Ideal for integration into automated lines.

Specification

Feature

• Can be used in conjunction with pail pumps and drum pumps.
• Manually operated hand gun capable of supplying from low to high pressure.
• Easy to use and highly durable, as material is dispensed by squeezing the lever.
• Equipped with a lock function to prevent accidental dispensing.
• Equipped with an adjustment function to adjust the lever’s grip distance.
• Various nozzles can be attached to the tip by attaching a separate adapter.
  

Specification

Feature

• Allows for the transfer/discharge of liquid materials without the need for manual transfer from drums with lids.
• Air-driven pump makes installation easy and suitable for use in explosion-proof areas.
• Wetted parts material can be selected.

Specification

*Maximum discharge volume may vary depending on material viscosity and piping conditions.

Feature

• Capable of transferring and dispensing high-viscosity materials from 200L drums, including adhesives such as RTV silicone, epoxy, and urethane, as well as grease.
• Because it draws directly from the drum, there is no need to transfer the material, reducing air entrapment and unwanted hardening.
• The inside of the drum is sealed with a wiper plate, and it has a proven track record of use with adhesives.
• As it is an air-driven pump, it is easy to install and can be used in explosion-proof areas.
• A wide range of pressure ratios and pump capacities are available.
• High-precision dispensing is possible by adding our dispensing system.

Specification

Feature

• Compatible with pails from various grease manufacturers
• Equipped with a powerful air cylinder, it can handle a wide range of greases, from low to high viscosity.
• The grease pump has a high pressure ratio and excellent durability and corrosion resistance with a small number of parts.
• The pump body is mounted on a small ram (cart type), making it easy to move.
• High-precision dispensing is also possible with the addition of our unique dispensing system.

Specification

Material regulator with gauge (optional)

Material lower limit/lowest limit detection sensor (optional)

Grease-specific inductor plate (standard equipment)

Feature

• The powerful downward pressure from the air-driven ram cylinder, combined with the action of the inductor plate and the upward stroke of the pump.
• It forces the material into the pump, ensuring reliable pumping of even semi-solid, high-viscosity materials and achieving a precise discharge rate.
• High-viscosity adhesives, greases, etc. can be directly pumped from 18L pails. High-precision quantitative dispensing dispenser.

Specification

Feature

• By changing the conventional air-driven pail pump to a servo-driven system, it has evolved into a high-precision pump that allows for precise flow control and is unaffected by viscosity changes.
• The air-operated lifting ram cylinder presses down on the follower plate to create downward pressure, and the priming piston assists in the upward movement of the priming piston to draw the liquid into the pump.
• The plunger pump then pressurizes and delivers the liquid, ensuring high-precision and reliable delivery even of semi-solid, high-viscosity materials.

Specification

Option

• Optional components such as high-pressure liquid hoses, fittings, and end discharge valves are available.
• For filler-containing liquids, the pump can be changed to a wear-resistant specification.
• Two PAL-SERVO units can be placed side-by-side to create a tandem or two-component configuration.
  In the case of a two-component configuration, the mixing ratio can be set arbitrarily (see reference photo below).
  

Feature

• The powerful downward pressure from the air-driven ram cylinder, combined with the action of the inductor plate and the upward stroke of the pump.
• It forces the material into the pump, ensuring reliable pumping even of semi-solid, high-viscosity materials and achieving high-precision discharge.
• High-viscosity adhesives, greases, etc. can be directly pumped from 18L pails. High-precision quantitative dispensing dispenser.

Specification

Dimensional drawing

Feature

• A special volumetric measurement system using tubing enables highly accurate quantitative dispensing unaffected by liquid viscosity.
• Dispensing volume is 0.1μR (0.0001cc) to 920μR (0.92cc) per dispensing point, with 1 to 6 points dispensing simultaneously, at a cycle of 1.2 to 2 seconds.
• The metering and piping tubing can be selected according to the properties of the liquid being used, making it suitable as a control dispenser for any liquid.
• It has a unique negative pressure mechanism that absorbs the liquid at the outlet after quantitative dispensing, stopping the process and preventing solidification at the outlet.
• For tasks requiring liquid changes during operation or cleaning and sterilization after operation, the system is easy to operate and allows for confirmation of the cleaning status.
• No pressurized tank or pressurized air is required, and it offers exceptional performance, especially for micro-dispensing of low-viscosity liquids.
  

Feature

• Rotor rotation speed can be freely set from 0 to 120 RPM.
• Discharge volume of 0.0001 cc/shot is possible.
• Unique special rotor mechanism dramatically increases tube life.
• Equipped with a smart and compact nozzle holder with a hand switch for excellent operability.
• Discharged liquid does not touch anything other than the inner wall of the tube, making maintenance easy.
• All-metal construction, including the rotor, makes it small and robust
• Operates on power supply only; no air equipment is required.
• Equipped with a simple discharge timer (0.1 to 9.9 sec).

Specification

Dimensional drawing

Standard accessories (for standard specifications)

Feature

• Equipped with a high-precision digital timer (0.01 to 99.99 seconds), ensuring exceptional dispensing accuracy.
• The vacuum interval mechanism allows for instantaneous vacuuming and an interval time to prevent the dispensed liquid from being sucked back in.
• The vacuum mechanism prevents hardening of the material at the tip of the tube after dispensing, as well as dripping and leakage.
• The rotor rotation speed can be freely set from 0 to 100 RPM.
• The dispensed liquid does not touch anything other than the inner wall of the tube, making maintenance easy.
• Equipped with a dispensing completion signal, making it ideal for integration into automated equipment.
• Dispensing volume of 0.0001 cc/shot is possible.

Specification

Dimensional drawing

Standard accessories (for standard specifications)