Feature

• The electronic shutter auto-iris function is operative even for a manual-iris lens.
• AGC and gamma characteristics can be set by the DIP switch so that it is easy to use not only for monitoring application but also for industrial use.
• Possible to reduce overall dimensions by using CS-mount lens. If it is required to use C-mount lens, insert the provided C-mount lens adapter between lens and camera body.
• Equipped with back light correction circuit.

Specifications

Dimensional Outline Drawing

Feature

• The current setting status of the camera can be displayed over the captured image using superimposing function enabling to display text information by OSD.
• When the external trigger signal is input, the image is reset at a random timing and the electronic shutter image can be obtained at a given point in time.
• CCD output mode is switchable between QUAD/DUAL/SINGLE mode.
  This camera has the auto-correction function to reduce the level difference in brightness at the boundary of right,left,upper and lower images.
• VElectric shutter release timing is output as a stroboscopic emission trigger signal. The camera is designed so that the strobe signal can be output even in the continuous shutter mode, and this contributes to the power saving for LED lighting and others as well as the reduction of smear.
• The monitoring function for measuring the internal temperature of the camera is incorporated.
• Preset trigger input and pulse width trigger input as asynchronous shutter trigger input are available.

Specifications

Dimensional Outline Drawing

Feature

• Either normal Camera Link board or PoCL board (with power over-lapping) can be connected.
• The global shutter sensor provides the image without distortion even in shooting of fast-moving objects.
• The advanced CMOS sensor provides a high-quality image with less fixed pattern noise.
• Achieves more-high speed operation limiting the number of read-out line
• Transmission up to 10m with the normal camera link cable is achieved by low-speed clock mode.

Specifications

Feature

• Either normal Camera Link board or PoCL (Power over Camera Link) board can be connected.
• Since these products are equipped with a 5 Megapixel-2/3″ (FCM5MHPL) or a 3 Megapixel-1/1.8″ (FCM3MHPL) CMOS sensor, they are suitable for replacing existing 5 Megapixel or 2 Megapixel CCD cameras.
• The global shutter sensor provides the images without distortion even in shooting of fast-moving objects.
• The Full Configuration（with two Camera Link cables）for the high-speed operation, or the Base Configuration (with single Camera Link cable) for the low-speed operation, can be selected depending on the application.
• Achieves faster speed operation limiting the number of read-out line.

Specifications

Feature

• Either normal Camera Link board or PoCL board (with power over-lapping) can be connected.
• The high-sensitivity CMOS sensor enables the adoption of general purpose C-mount, despite the12 million highpixels.
• The Full Configuration (with two Camera Link cables) for a high-speed reading applications, or the Base Configuration (with single Camera Link cable) in a low-speed reading application, can be selected depending on the application.
• Reduced size and weight by original mechanism and electrical circuit design.

Specifications

Dimensional Outline Drawing

Feature

• Either normal Camera Link board or PoCL (Power over Camera Link) board can be connected.
• The global shutter sensor provides the images without distortion even in shooting of fast-moving objects.
• The Full Configuration（with two Camera Link cables）for the high-speed operation, or the Base Configuration (with single Camera Link cable) for the low-speed operation, can be selected depending on the application.
• Achieves faster speed operation limiting the number of read-out line.

Specifications

Dimensional Outline Drawing

Feature

• Capable of image transmission over 100m without repeater.
• Capable of capturing images in PC without image capture board.
• Equipped with IP engine for high speed image transmission.
  Jumbo frame packet-compatible.
• When the external trigger signal is input, the image is reset in random timing (Asynchronous timing) and the electronic shutter image can be obtained at a given point in time. (Asynchronous shutter mode)
• Camera connector (6-pins) has the trigger input terminal and the strobe timing signal output terminal for high speed random shutter (Asynchronous shutter)
• Variant trigger modes including asynchronous shutter in H-reset mode are equipped.
• The current setting status of the camera can be displayed over the captured image using superimposing function that is capable of displaying text information by OSD.
• The camera is shipped with SDK including viewer software and various sample program sources.

Specifications

Dimensional Outline Drawing

Feature

• Capable of image transmission over 100m without repeater.
• The high-sensitivity CMOS sensor enables the adoption of general purpose C-mount, despite the12 million highpixels
• Reduced size and weight by original mechanism and electrical circuit design
• Power can be supplied either camera connector on the back panel or via a LAN cable (PoE).

Specifications

Feature

• Capable of image transmission over 100m without repeater.
• Since these products are equipped with a 5 Megapixel-2/3″ (FCM5MHGE) or a 3 Megapixel-1/1.8″ (FCM3MHGE) CMOS sensor, they are suitable for replacing existing 5 Megapixel or 2 Megapixel CCD cameras.
• The global shutter sensor provides the images without distortion even in shooting of fast-moving objects.
• It is possible to be supplied power by the camera connector on the back, or PoE method by LAN cable.
• Achieves faster speed operation limiting the number of read-out line.

Specifications

Dimensional Outline Drawing

Feature

• Higher speed image capturing by reading out two lines at one scan.
• The large unit cell size of 7µm provides high S/N.
• Equipped with Global shutter and FFC function.
• By the Bayer color format, gap correction is not necessary.
• DC12V single power operation.

Specifications

Dimensional Outline Drawing

Feature

• High S / N images are obtained with 10 micron square size sensor.
• Equipped with Color gap correction function.
• Equipped with FFC function.
• Equipped with White balance function.
• Possible to get stable video signal despite a change of ambient temperature, as the dark current correction circuit is incorporated.
• Operation with a single DC12 power source
• The small and lightweight product by original design

Specifications

Dimensional Outline Drawing

Feature

• The equipment operates with a single DC12V power source.
• The pixel size is large enough (9.325µm) to obtain high S/N images.
• Dark current correction circuit helps to obtain stable images even when the ambient temperature changes.
• The color gap correction function is equipped.
• The shading correction function is equipped.

Specifications

Dimensional Outline Drawing

Feature

• The large 5µm square pixel size sensor enables to obtain high-sensitivity and high-definition images.
• Equipped with Global shutter function and FFC function.
• Small and lightweight product with unique design
• The narrow line spacing 5µm makes less susceptible to the adverse effects of imaging from oblique angles.
• The impact of noise during cable transmission is significantly reduced, because it uses optical communication.
• Wire saving

Specifications

Feature

• The large 5µm square pixel size sensor enables to obtain high-sensitivity and high-definition images.
• Equipped with Global shutter function and FFC function.
• Small and lightweight product with unique design
• The narrow line spacing 5µm makes less susceptible to the adverse effects of imaging from oblique angles.

Specifications

Feature

• Setup parameters can be controlled by the communication command (RS232C) from the capture board.
• Global shutter function, FFC function, and anti-blooming function are equipped.
• DC 12V single power operation
• Built-in dark current compensation circuit provides stable output under the change in the ambient air temperature.
• Very compact and lightweight by the unique circuit and mechanism design
• Versatile F-mount or C-mount (TL-2048NCLC only) is employed.
  

Specifications

Dimensional Outline Drawing

TL-4096NCL / TL-2048NCL

TL-2048NCLC

Feature

• Restriction on the encoder signal specs is significantly relaxed as the asynchronous shutter function is equipped. Hence, clear images can be obtained even when the line speed of the object is not stable.
• Despite the periodic fluctuation of input pulse of the external encoder, stable images can be obtained thanks to exposure control function.
• Reduction in size and weight has been realized by adopting original circuit and mechanism design.
• Possible to get crisp images as output characteristics of ODD and EVEN pixels hardly vary at all.
• The equipment operates with a single DC12V power source.

Specifications

Dimensional Outline Drawing

Feature

• The equipment operates with a single DC12V power source.
• The pixel size is large enough (70µm) to obtain high S/N images.
• Reduction in size and weight has been realized by adopting original circuit and mechanism design.
• Simplified exposure control function is incorporated.(at below 3.2kHz in scan rate)

Specifications

Dimensional Outline Drawing

Feature

• FFC function is installed. (FFC: Flat Field Correction is a function to coordinate the wave pattern irregularity with a lens and the sensor element flatly.)
• Since various models of capture boards from board manufacturers can be connected, it is easy to get high-precision images from the camera.
• Simplified exposure control feature provides the output of the constant image level against fluctuations of the period of the external rotary encoder signal. (At the scan rate lower than 6.3 kHz)
• DC 12V single power operation
• Small and lightweight

Specifications

Dimensional Outline Drawing

Feature

• The equipment operates with a single DC12V power source.
• Reduction in size and weight has been realized by adopting original circuit and mechanism design.
• It can get crisp images as output characteristics of ODD and EVEN pixels hardly vary at all.
• Simplified exposure control function is incorporated.(at below 3.2kHz in scan rate)

Specifications

Feature

• Since various models of capture boards from board manufacturers can be connected, it is easy to get high-precision images from the camera.
• 7µm square pixel size provides high-definition images.
• Equipped with Global shutter function and FFC function.
• Anti-blooming function is incorporated.
• Clear image data is obtained by the small difference of the characteristics of the odd and even-numbered pixels.
• Dark current correction circuit helps to obtain stable images even when the ambient temperature changes.
• DC 12V single power operation
• Rduced size and weight by original design

Specifications

Feature

• It matches well to most of capture boards from other manufacturers, which makes it possible to construct high-precision image processing systems.
• Possible to get high-definition images thanks to 3.5µm square pixel size.
• Equipped with Global shutter function and FFC function.
• Anti-blooming function is incorporated.
• Possible to switch between Base and Full config. mode via serial communication.
• Equipped with versatile F-mount.
• Dark current correction circuit helps to obtain stable images even when the ambient temperature changes.
• The equipment operates with a single DC12V power source.
• Reduction in size and weight is realized by original design.

Feature

• It can easily construct the communication link (RS232C) connecting with PC and our Line scan camera (JB,F-series camera)
• Input signals:
  CLOCK signal (RS-422)  20MHz max.
  SYNC signal (RS-422)   4.5kHz max.
• Output signals:
  12V DC, 0.8A
  CLOCK signal (RS422)
  SYNC signal (RS-422)

Specifications

Dimensional Outline Drawing

Feature

• Since various models of capture boards from board manufacturers can be connected, it is easy to get high-precision images from the camera.
• 3.5µm square pixel size provides high-definition images.
• Equipped with Global shutter function and FFC function.
• Anti-blooming function is incorporated.
• Clear image data is obtained by the small difference of the characteristics of the odd and even-numbered pixels.
• Dark current correction circuit helps to obtain stable images even when the ambient temperature changes.
• DC 12V single power operation
• Reduction in size and weight is realized by original design.

Feature

• The large 5µm square pixel size sensor enables to obtain high-sensitivity and high-definition images.
• Equipped with Global shutter function and FFC function.
• Small and lightweight product with unique design
• Doubles the sensitivity by using 2 line TDI mode.

Feature

• The large 5µm square pixel size sensor enables to obtain high-sensitivity and high-definition images.
• Equipped with Global shutter function and FFC function.
• Small and lightweight product with unique design
• Doubles the sensitivity by using 2 line TDI mode.
• The narrow line spacing 5µm makes less susceptible to the adverse effects of imaging from oblique angles.
• The impact of noise during cable transmission is significantly reduced, because it uses optical communication.
• Wire saving

Specifications

Feature

• It can receive the image signal from the camera and can also send the external trigger signal and HD/VD sync signal to the camera.
• Three types of trigger signals are available.
  C-MOS logic level signal
  3.3V logic level signal
  Current signal via photo coupler
• Equipped with a one-shot trigger function by a push button switch on the panel and a cyclic trigger function (function to automatically generate cyclic trigger signal).
• Equipped with an interlock function to prevent a trigger signal being input by operation of a panel switch.

Block Diagram

• Trigger signals for asynchronous shutter operation can be converted into pulses of predetermined duration (1ms) by an internal one-shot timer or can be applied directly to the camera without change.
• Also trigger signal input circuit can be separated from a trigger input terminal of the camera by a switch, where necessary.

Specifications

Feature

• Equipped with a high-brightness LED that does not tire eyes and can be used safely.
• LED colors: orange and green.
• The pattern shape is available in cross, line and grid, and the focus can be adjusted.
• Long life
• Low heat generation
• Small, light weight, and high quality
  

Specifications

Feature

• Semiconductor lasers that replace the conventional He-Ne lasers.
• Povide bright, ultra-fine, and wide line lengths and a long life time of 55,000 hours or more.
• Equipped with a life pre-alarm indicators and output function. When the laser life is approaching, the red/green indicators light up alternately to notify the user.
• Built-in AC power supply with a wide voltage range and high-performance noise filter.
  

Specifications

Feature

• Provides uniform brightness.
• Incorporates a unique prism that provides more uniform output at the center and edges of the line. (Intensity difference: within 10%)
• High-quality data can be obtained by 3D measurement including shape detection.
• Ultrafine, small and light, and long life.
• Wavelengths of 406 nm and long-life 660 nm are available.
• The HP type is within Class 2 and has more than twice as much output power as the normal type.

Specifications

Feature

• Flat line lasers with uniform brightness, high intensity, and wide line length.
• Easy focus adjustment with a ring focus adjustment mechanism.
• Easy to adjust the work distance with low optical power fluctuation in line direction.
• Ultra-fine and long line with line length : distance = 1:1 can be obtained. (In the case of 406nm)
• Wavelengths of 406 nm blue-violet, 660 nm red, and 515 nm green, and the original outputs of 20, 30, 60, and 90 mW are available (only 10 mW/20 mW at 515 nm).
• 406 nm is ultra-fine and low-noise, and 660 nm has a long service life of 20,000 hours or more.
• At 515 nm, a high S/N ratio is obtained for black workpieces and red-hot materials.
• The lights can be turned on and off by the external control function.
• The analog type AN series is also available with light intensity adjustment from 0 to 5 V.

Specifications

Feature

• Laser projector with 20m or more projection distance for industrial use.
• In the case of inclined projection, the LDX series provides a good line width on far and near target surfaces by its deep depth of focus.
• The LDX series provides three kinds of laser light: basic 640nm red, brilliant 520nm green, and 450nm blue to be distinguished from the other two colors.
• Equipped with a life pre-alarm indicator and output function.
• When the end of life is approaching, the red/green LED indicator brinks alternately and a pre-alarm output is made.
• The power source range for the laser projector is from 12 to 24 VDC.
  

Specifications

Feature

• Projection of clear green line onto black rubber and reddish wood is possible.
• Equipped with a life pre-alarm indicator and output function for the laser unit. When the laser life is approaching, the red/green indicator lights up alternately to notify the user.
• The main unit power supply is 12 V to 24 VDC, which can be taken from an FA equipment power supply. The AC adapter type can be directly connected to the AC power supply for operation.
• Cross patterns (cross-shaped) are also available in addition to line patterns.
  LDU20 (10) 515C1 (-A): Line length 150 x 150 / WD1,000
  LDU20 (10) 515C2 (-A): Line length 1,000 x 1,000 / WD1,000
  

Specifications

Feature

• AC-powered laser projectors.
• Built-in high-performance noise filter.
• The Z-type provides a fine and long laser pattern with a wide fan angle.
• The pattern shape is available in spot, line and cross, and the focal distance can be adjusted.
  

Specifications

Feature

• Semiconductor green lasers with 515 nm wavelength for industrial use.
• Replaces the conventional DPSS system, and has a wider operating temperature range, long-term stability and longer operating life.
• With the wavelength close to visual sensitivity peak, the laser projects a vivid and sharp green color on black and red objects.
• The pattern shape is available in line, spot, and cross. The line produces a long pattern with a length of 1,200 mm(W.D.:1 m), and the spot produces a small spot of 60 µm/(W.D.:100 mm). The cross is available in short and long shapes.
• The focus can be adjusted from a short distance of 50 mm or less to a long distance of 5 m or more.
• The lights can be turned on and off by external controls and the optical output power is adjustable by VR.

Specifications

Feature

• Compact lasers with case diameter φ12.
• The LDCM-LV is a variable projection distance model and its focal distance can be adjusted from 50 to 2,000 mm.
• The light source comes in bright red and clearly visible green.
• The external control function allows to control the lights on and off up to 1 kHz.
• The LDCM263S to CR are fixed distance models and equipped with a red light source.
• The cross and circle patterns are available in addition to the spot and line patterns.
• Provides a good line width with little fluctuation by its deep depth of focus.
  

Specifications

Feature

• Small, light-weight, long-life and high-quality lasers.
• Provides a long laser pattern with a wide fan angle.
• This is the most basic type.
• The pattern shape is available in spot, line and cross, and the focus distance can be adjusted.
• More compact φ8 type is also available. (LDS167S)
• The pattern shape may vary depending on the ambient light.
  

Specifications